Looking to replace all the fuel lines on my RD03 as a couple more leaking a bit nowadays. Rugged roads has 4or5 sizes. What is most common I would need? I plan on buying some bulk lengths. They have 4.5, 5.5, 7.3 and 8mm ID. Mine are so old going to be hard to determine sizes. I know I have used...
I am from Sydney Australia,
And own a 1982 Suzuki Katana 7/11.
Noticed you have fork extensions.
Am trying to fit 07 Bandit 1250 forks to my spare Kat and maybe those fork extensions might be a fit.
Can you tell me what size they are and the thread pitch as well. My forks are 43mm...
I would like to replace my coolant hoses on my RD03. Honda parts are NLA. I was reviewing threads about the Samco or other aftermarket hoses and found threads that stated that some hoses were incorrectly sized.
Those hose kits are pretty dear. Can't see paying that much for parts that are...
Rear brake caliper including brake hose and master cylinder. Basically the complete rear brake assembly except the brake pedal.
Condition unknown but everything looks to be in good order. Photos available on request.
Asking 50€ for the kit.
Located in Sweden.
Shipping, including tracking and...
1976 honda xl 250 breather hose is in a "T" ...comes out of the crankcase,then T,s off hanging down by the swing arm,then the upper part that T,s off goes towards the front of the bike and i cant figure out where it attaches to it dont go on the air box or anything..does it just hang up somewhere??
I would like to customise my FX650 and wonder if anyone has fitted alloy 3 spoke wheels [like those on a Suzuki GS500] to their Honda. If this is a doable how complex is it or is there an easy way of fitting wheels from another bike which need little modification. Any photos would be helpful.
This post is for those who bought their RD07/07A new from dealers back then when they were still in production. :rolleyes:
I'm curious about original add-on parts from Honda: were there any? Crash bars, luggage racks, anything else? Have You ever seen any Honda catalogues with original...
Just dropped my AT today at slow rolling speed and thanks to those Rugged Road crash bars any serious damage was prevented.
But the right one took a substantial hit and it absorbed all the force which resulted in it being slightly bent inwards.
Is it possible to bend it back?
I will post some...
My 700 has always run a bit hot. I am thinking about swapping those 2 tiny radiators for a single large one. My question is would it be a simple swap or is there anything there to stop me doing it, some technical reason? I guess radiators are pretty simple but would like to hear from someone who...
For those amongst you that like to have a tinker in the workshop over the cold winter months, how about making a lamp like this one I found on the interweb.
As soon as I get a bit of spare cash, I think I will make a pair of them for myself and jnr as I have some old pistons lying around.;););)...
Does anyone know the size of hose used on the front and rear brake reservoirs.
I need to replace hose that's between reservoir and master cylinder. (front and rear brakes).
Would measure it, but want to get some ordered asap.
Bike is an RD08
Looking for one of those protectors that are attatched to a original muffler.
Needs to be shipped to The Netherlands if that wouldn't be a problemo:)
If you have or happen to know anyone, please tell me:)
Africa Twin XRV650 RD03 mod.1988 in very good condition.
-Honda central stand
-WP springs in front suspension
-Rental aluminium steering
-High pressure hose at the front brake
After many years I've decided to change bike away from the Honda stable.
I would like to thank all those who contributed or commented on any of my posts.
You've been a really helpful bunch of people.
FYI i've just bought a new 2017 VStrom 650, not the xt version.
Reallly nice bike, I'll miss...
The picture of the Excel wheels (off RuggedRoads' website) shows the dimples are undrilled. Maybe it is a generic image. Those who bought their Excel wheels from them, did they come pre-drilled or not? Also, if they comre pre-drilled, was it for the stock nipples of for oversized nipples for...
Just brought a 1985 CX650 seemingly a quite uncommon version of the CX500 family, only made a few 1000s worldwide for a year or so.
Many of those I ride with have BMW r600/750/800 so had to get something different and found this in Cardiff when I was looking for something quite different on the...