So I bought a well used ‘89 XRV650 which I am rebuilding. The weels are corroded and I need to replace them. I’d like to keep the bike as original as possible so I’m looking to source original DID rims.
I allready found a nice used rear wheel and now I’m searching for a front wheel rim (I will...
I'm the proud yet frustrated owner of a Transalp xl650v6 which I brought new in August 2007. Ever since then I've had a love hate relationship with the bike especially when it comes to maintenance and repairs.
Firstly let me admit that I am a sinner! Hailing originally from New...
1987-89 drum brake model rear Honda Transalp xl600v PD06 wheel FOR SALE
After an engine malfunction I’m now parting out my ’87 Transalp. My original rear rim rotted away (as they all do), so a few years ago a professional wheel builder (Paul Jackson, near Huddersfield) laced the oem Honda hub...
Hi, I'm in the process of rebuilding both front and rear wheels on my 1998 RD08, problem is I've only got the 88-89 manual.
According to this manual the front wheel offset is given as 22.25mm from the disk to the rim, this is probably ok for my '98 as nothing much changed from the RD02 model on...
I'm looking for a rear hub or wheel for an XR250R ME08 1996-2004.
It will need to be shipped to Taiwan.
Sadly I'm not aware which other XR hubs might be compatible with this model.
Thanks and cheers, Chris
My XRV650 RD03 needs its wheels replaced. It seems it was stored outside on grass for about 17 years.
I have managed to get a Transalp 21" front in good condition and a ST1000 Pan European front left hand brake disk.
Would a Dominator rear wheel fit?
Good Dominator rear wheels are cheaper and...
so I own both a crf1000 and rd07a. My crf1000 is having its wheels replaced under warranty due to spoke errosion. Question I have is could the old wheels be respoked to the rd07a hub as I love the gold wheels? Obviously assuming that the dealer will sell me the old wheels
Due to the new regulations banning pre-2003 motorcycles in Singapore, I have to part with my beloved AT within the next 20months.
Though there is an underground protest movement by the classic/old bike enthusiasts, I don't have much confidence that any changes will happen.
Hence, I'm looking...
Clutch rattle is excessive it does quieten when i pull in lever but its excessive and i need to sort it !Now i am still not ready to pull it apart so i still dont know whether its just worn plates or more serious ..I was looking on you tube and i found a guy called [email protected] who can...
First big problem on my rd03 restoration the casting on the hub broke away when removing the very stuck bolts. I was going to rebuild the wheels anyway.
So I need
Or transalp 600 hub Or wheel
Or dose any one know of any other wheels fit.
Sent from my SM-G955F using Tapatalk
So, I might as well start with a brief description of whats going on with my RD07:
Decided to upgrade the front forks for a WP48mm. It's an easy swap if you buy the whole front end set like I did. I got the brake pump + braided cable + caliper + forks (with braces) + wheel from a 2003 KTM 450...
I am trying to build up a new set of wheels for my RD07A so I have the old ones and a set of new. The reason being the old set will have road tires and the new set will have 50/50 tires on for an easy swap around when I want to hit the Bush down here in Melbourne and my new wheels will...
As per this forum post http://www.xrv.org.uk/forums/africa-twin/164714-total-wheel-bearing-failure-photos-anyone-got-spares.html
My rear wheel is shot! Desperate need of a new, I'll take pretty much anything you have.
It would seem that the previous owner of my RD03 suffered a wheel bearing failure on the rear. Instead of finding a new hub they bodged it and have left me to sort out the mess.
The bearing should sit between these two lines, not going to happen here.
A mixture of bearing failure...