New member question - Hello recently bought a 2008 transalp 650 which I am enjoying riding much more than the GS1100 I just got rid of (too heavy !)
Anyway, wonder if someone can help identify the pannier rack that my bike has fitted from the attached photo. The bike did not come with panniers...
hi i have an XR400 standard bike, i live in portugal and parts are hard to get, i am looking for piston ring set and top half gasket set with valve seals any idea where to get them in uk thanks kevin.:cool:
Hi All. Long time no post. I do hope you're all well.
My rear shock is getting a bit long in the tooth and I want to start looking to replace it. My bike is 100% road going these days so I would not be against a road set up rear shock, so does anyone know what fits? I know there are lots of...
I’ve had a number of bikes, big, small etc and I’ve never had a bike as hard to put on the main stand as the 700.
ive strained my shoulder.
strained my foot.
Airhead Beamers, heavier bikes... easier.
sports bikes with main stands.... easier.
650 Trannie..... don’t remember this being hard...
OK so I'm on a roll now asking questions!
Bike warms up lovely when stationary, temperature gauge showing where it should be however, as soon as I start riding gauge drops to zero.
I'm guessing that either
a/ Thermostat knackered
b/ Thermostat doesn't exist.
If either a or b I need to replace...
I have recently purchased a 1984 XLX250R & on my first ride today I am unsure if the speedo or tacho are reading correctly
at 80klmh the tacho reads around 7k it seems to be quite high
the gearing is 14--40 & I read std gearing is 13--38 which is not too far away
can someone give me an idea of...
I'm in the process of changing the front sprocket on my RD07a. I removed the sprocket cover and then the old sprocket. I was merrily cleaning all the old crud away before fitting the new one when this little fella dropped out. I have no idea where it goes so any help would be...
does anyone know if there is a big difference between a NX650 frame and a XL600 Frame?
I'm considering to put all XL600parts (fuel tank, seat, lichts, fenders etc on a Dominator frame (+engine)...
Maybe also an option would be to put a dominator engine in the XL600?
I have no idea how...
Hello guys ,
i was just wondering if anyone tried to replace the rear shock from another model Honda/Yamaha..etc ?
the aftermarket is too expensive and new OEM as well . i see a lot of good rear shocks in good condition and cheap as well from other bikes
any idea ?
Long time dont see!
came across this on an xr650r group ... anybody ever tried it? seems an excepcional idea to avoid the Achilles' heel on the XRV 750 and TRANSALP
After doing a bit of research, and removing the actual bearings im a little confused. Found on forums that linkage bearings were TA1720Z (O.D 24mm, I'D 17mm, Width 20mm) The ones i removed from bike were BM172417-1 (O.D 24mm, I.D 17mm, Width 17mm) Any idea which is the correct bearing to go...
This is my first post on here (this might be in the wrong forum) but i am looking for some guidance / experience.
As the title suggests i am looking to import a used bike from Italy. Has anyone done this before that could give me an idea of the costs and the time process of the...
After taking my calliper apart to clean the pistons and bores and to replace the seals I made the error of not taking photos of where the two clips/shims go !! I've ordered a manual but until it comes can anybody help? It's a twin piston calliper off a '93 transalp and there are two stainless...
As the title suggests, I am toying with the idea of altering my Varadero by fitting a different petrol tank from a VTR, has anyone done this or used a tank from a different bike? If so how difficult and what was required? All replies welcome:thumbup:
I just looking for Oil Temperature Gauge for my '93 RD02. I found lot of them at ebay around 30 EUR for rd08, and 65 eur for rd02.
As far as I know, the thread size is different: RD02 has around 29mm, and RD08 has 20x2.5mm.
But, the rest of the stick is same?
If this is true, I...