Hi ive bought a 97 XR400R but upon inspection its got a broken valve which in turn has damaged the head too much for repair so im looking for a head preferably with valves/cam etc im in UK? Thanks in advance.

Im Looking for tank badges/logo for my CG125 tank. The spacing between screw mounting holes is 60mm, but all the badges i can find on fleabay are 67mm spacing between holes. Anyone bought any of these in the past for their CG125 tank with 60mm hole spacing?

Im Looking for tank badges/logo for my CG125 tank. The spacing between screw mounting holes is 60mm, but all the badges i can find on fleabay are 67mm spacing between holes. Anyone bought any of these in the past for their CG125 tank with 60mm hole spacing?

Hi Im after a rear rack, not the blue bit for a Africa Twin rd03 if anyone as one please Pm Thanks

Hi Im after a fair few parts Exhaust (I don't mind what kind) Fuel tank levers clocks all lights cables grips mudguards seat cover tyres chain /sprockets foot peg rubbers locks if you have anything else I may take it too Thanks Si

Hi All I've just got myself a 76 XL250 that im hoping to restore, I need a large amount of parts, I understand there's a company over here that is good but is there a main place in the states or is it just a case of looking around ? Thanks in advance Simon

Im in the UK and need a rear lowering kit for my friends 2002 XR250R any ideas guys?

Hi im rebuilding a 2002 XR250R for a friend but he does not want gaiters so i need to find dust caps im in UK Thanks

Hi all im looking for a blue seat cover and blue gaiters giving the bike a nod towards the 80's CR range, i can get gaiters but struggling with the seat cover im in UK Thanks

I recently sold my Vara and still have the original silencers, with around 15k miles on them. Free for collection (York), or they go to the tip. Tim

Hi Im building a bike from my 2000 AT and a 600v Transalp frame and wanted to know if anyone has managed to fit the petrol tank from an RDO7a onto a transalp. I think the frame on the transalp is wider so the tank sits higher?? Cheers Cam

People ... Those who have stripped there A/T's and had the frame blasted and powder coated what colors have you gone for ... im think a graphite grey or anthracite ... :thumbup:

As the title says, im busy getting frame ready for powder coat. Does any one know what size fittings can be used to plug oil ways to keep out the bead blast. Or any other ideas of things i can use??

Does anyone know if a 2001 engine will swap straight into a 1990 model ? Regards, Tim.

Does anyone know where the best place is to get a set of rear wheel spokes for my bike, please. Regards to all, Tim.

morning chaps,im just restoring a 79 xr 500 and am missing the speedo anybody got a speedo for xr 185/250/500 twinshock model?ta mark

What type of coolant are you using, I don't know whether to use ethylene glycol silicate based or the later type O.A.T (organic antifreeze technology) does not contain silicate. Im'e not bothered about the antifreeze aspect as the bike (650) never sees frost but wondering about the...

hi im greg from northern ireland just bought myself an rd04 looking forward to a great forumn hope i can be off help to someone

cts off road helmet for sale in new condition still with the tags size small (56) in silver with red and white striping im taking genuine offers on it plus postage thanks

XRV 750 Africa Twin 1990 stick on MPH clock face Does anyone know where I can get a stick on MPH face for my clocks, please. Regards, Tim.