kick

Hi Guys i'm having trouble splitting the bottom engine case on my 82 Xl500r, i have to replace the kick start return spring, i have the engine upside down on the head & I've removed all the exterior screws, are there any internal screws i have to remove & what is the best way to separate them...

Xr400 Mot Aug 17 Only selling due to kick start and new hip doesn't like it 1998 s reg Been well looked after Looking for sensible offers

Hi Guys, I have a 2000 NX650 which I am in the throws of making it look like an old CR250 Elsinore... Would like to have a kick starter... Can it be done...? I hoping it's just a case of using earlier parts..? Cheers, db.

wanted asap xr 250 kickstart idler gear must be 24 teeth 68mm in diameter with a 20mm hole or the shat and 10mm thick ive bought several rom ebay to no avail please please help me

Hi all im in desperate need o a kick start idler gear xr250 believed to be 1986 ive bought 2 ebay purchaces and both are wrong so what i need is the idler gear with 24 teeth 6 holes in the gear 67mm in diameter and a 20mm diameter hole in the middle Please can someone point me in the right...

What differences are there in the frames between the XLR 125 and the 200 ? I know the 200 electric start and the kick start only differ where the bigger battery fits the elecy start bikes .

Help please honda 400 four. Guys got a problem the kick start won't engage the gear , any ideas how you fix that ,oh knowledgeable ones. If you guys don't know then know one does.

hi all out there have a small problem with ny 2006txt pro 250 starts first kick when cold and runs fine but when it has warmed up it is very hard to start again it has had new plug clean filter any ideas or better still an answer to this many thanks

Well, the curse of the Strong Right Leg has happened again and I've snapped my kick start. Does anyone have one to sell, or does anyone know of anyone else, breakers, etc., who might have. I've been on eBay and there's only one from the USA available, and ideally, I'd like to get sooner, as...

Has anyone fitted heated grips to a kick start XR400? Does the system produce enough power to run them? Where is the best place to tap in for power?

A friends 1998 xr 400 when you kick it over makes a sort of scraping/rubbing noise, it starts up really well and as you rev it the scraping noise seems to increase with engine speed, the bike pulls well, doesn't seem to smoke at all, just seems strange to me as mine and my other mates doen't...

Hello, I'm after some help. Firstly does anybody have an electric start dr. I'm after the code on top of the cdi and some pics of what wires go where. The reason I ask is I have converted a kick start to dual start. Does anybody have the correct cdi for sale. It has dual pick up. Hopefully there...

Please see my ad; http://www.xrv.org.uk/forums/bikes-sale-wanted/82054-1984-honda-xl-200-kick-electric-sale-swap.html#post640454 Cheers Jim

Or does the RSS need a kick up the RRS? Reason I ask is that there hasn't been anything new added for yoinks

ghostbikes.com have sent me a discount code which they tell me to share with friends, but I'm going to share it here instead :p Not a lot I know but better than a kick in the nuts, £5 off next purchase if you spend at least £75 use code 05GB75 at checkout. £10 off next purchase if you spend...

Gonna kick myself but I cant recall where the hoses from the resovior at the back of the bike goes to??I know one runs to the radiator cap but the other??And which goes where??:confused:

I have got a pair of XLR 250 Bajas. I have broke one of the kick start levers and am having trouble trying to get hold of one at a sensible price. Does anyone know if an XR one fits and where I can get one? By the way is an XLR an XR or an XL or a hybrid? I dont really know much about them...

Hi guys, I'm in the process of tidying the @ up - yes, I know I should be riding it but the crash bars were soooooo rusty I was embarrased to be seen out on it! So to cut a long story short - in a one in a million event a mash hammer I'd beeen using to impact driver out a brake disc bolt fell...

Anyone know how to fit the spring correctly. I have taken the old broken spring off. I may be wrong but it looks like the long tail on the O/D of the spring fits in a hole in the casing and the shorter tail on the I/D fits in a hole in the white plastic cover over the shaft. Any advice on...

Hi I am looking for a kickstart gear for an XR 400 can anyone help. Would like a good second hand one. Cant find a new one in stock anywhere, and will have to come from japan, so probably wouldnt get it before the end of december. Otherwise will it be ok to use the one I have, I lost a few...