My RD 4 seems to be running a little lean after i have installed a hi-flo filter and Arrow exhaust. I am thinking of fitting dynojets stage 1 kit, but is it worth the money?
The Arrow is fittet with a sligtly opened-up db-killer.
This is a strange one...
When I start the bike on the side stand and use choke the bike idols around 1200rpm,
BUT if i lean the Bike over untill it’s level then the revs climb to 2500-3000rpm.
This only happens with the choke on.
when I’m moving the bike on or off the side stand the handle...
Well lads that time again where I'm thinking of my next bike, I'm leaning towards another Dominator but they seem to be slim on the ground in this neck of woods (ROI), I am wondering if anyone here has had both and would you recommend one over the other? Thanks in advance:thumbright:
This is free as it came with the RD03 I recently bought. It's textile with leather shoulders and elbows. It is a size 54, which is too large for me otherwise I would keep it. I think it's from the 80s, but I have no way to verify that. Well used, but it's FREE. I can send pics if you want them.
dunno if this works on all bikes.. but I had it on my R1200 GSA, for connecting from the head-stock power connection to the cradle of my Garmin Zumo
30 euro posted (to Ireland or UK) . Payment by Paypal (gift option please)
I am looking quite hard online for 2mm leather jackets but it seems the 1.1-1.4mm range is mostly in fashion.
Anyone knows of a good brand that makes leather thickness higher than that range please?
I have recently noticed that my SLR seems to be leaning over further than normal when on the side stand .
When I stand the bike upright and put the side stand out ,If I put my boot under the stand I can lift it up about an inch. ie up and down movement.
This inch makes a big difference to the...
I took the TA to work yesterday. It was frosty so I selected the correct rider mode, adjusted the screen for the speed I would be travelling, adjusted the suspension, de selected, the traction control, selected launch control, adjusted the lean control abs etc:toothy10:
Nah not really I...
Is this a known issue with the AT? Noticed a puddle on my garage floor, been dreading finding out the cause but it just seems to be the rubber gasket.
From what I can see it looks fine though and I'm confused as to why a fairly durable looking gasket could just fail suddenly.
Best pic I...
Alright lads i have a fmx and ther seems to be a petrol/oil leak comin from the spark plug or near the plug i have tightend the spark plug but i dont wanna do it too tight can any body shed any light on this for me?
Just checked some of my stored leathers in my garage and two items in particular have bad mould on the surface. Is there a way of getting rid of this without
binning a perfectly good leather trousers?
I recently fitted some new tires, and to begin with I tried the 39psi on the rear, as indicated on the tire, and about the same on the front. It sounded like a lot compared to my old Anakees ... and I simply couldn't keep the bike going straight. When I leaned just a little, they...
Hi guys I have a leaking in my 45L African Queens tank for my Africa Twin. It's on the place where the tank rests in the frame. Pretty stupid idea if you ask me, the thing looks like it should be solid here. Anyone has any ideas about how to fix it? The tank is made of fiberglass. Thanks
Hi guys, quick question (again). Can I lean out my RD07A front cylinder somehow (moving needle depth, air screws...)? The spark plugs are pitch black and she hammers along at 120km/h. It sounds impressive pulling strongly through the gears but i'm sure it's not the best. Any info is really...
I had the seals replaced on my xr yesterday. I put front end back together pumped the forks up and down - and fork oil squirted out of the bottom of the RH leg - from the big hex socket cover. It's up on the stand now and is not leaking when not under compression.
Anyone got a complete side stand and bracket for RD07. Mine has bent at bottom and got so much sideways movement that when I park it and get on it, I can only just lift the weight up as it is leaning way too much
Just found my tank is leaking from a pin hole. Has anybody ever had a repair done and was it successful? Found some stuff called POR15 advertised on the net, anybody used it and is it any good?
Hi there, I am looking toward a possible purchase of a dominator, however it seems to have some issues with staying running once started. Been a few people look at it with little success.
From what I understand the carb has been checked, coil and cdi changed from another running bike with no...