Honda XRV Forum banner

length

  1. Varadero
    Does anyone know the length of the original shock of a mk2 abs varadero? I would like to compare it with the bitubo shoch that it is fitted to my bike at the moment.
  2. XR
    hi, i managed to leave my side stand spring in a forest in devon :/ a genuine honda spring i found for 4euros but with 18euro postage !! so im opting for a universal spring, the only thing is i dont know what length to go for. between the pin on the stand and pin on frame is about 170mm but...
  3. For Sale / Wanted
    Hi, I'm looking to get some stiffer springs for a project bike (with unknown forks) and it could get expensive if I end up buying lots of different springs & rates new. It's been a little while since I had a Honda Transalp but think they might be suitable, so anyone got any old Transalp fork...
  4. Transalp
    Hi i was just wondering if anyone knew what length chain i would put on my Re-build. I have put an AT swingers onto an 87 Transalp frame, I think the AT had a longer chain than the TA due to the longer swingarm but no sure about this combo...
  5. Dominator / FMX
    Has any one got a pilot jet for a carb fitted to a RD02 to hand, or happen to know the length? Just stripping the carb and the current pilot jet that was fitted is 24mm in long, however the refurb kit for the carb came with one that was 28mm long. Any clues on which one is correct? The 24mm...
  6. Dominator / FMX
    Does anyone have a Dominator frame and/or swing-arm handy that they could measure for me? I need to know the width across the front of the S/A i.e. along the pivot (or the width inside the frame where the S/A fits).I also would like to know the S/A length, i.e. from pivot to wheel axle (middle...
  7. Africa Twin
    I have 25mm handlebar risers on my @ and have just fitted starbars. Thing is, the bars are a tad longer than standard bars and on full lock the engine revs due to the length of the throttle cables not being enough. I like the new bars and also like the risers, so is there a longer throttle cable...
  8. For Sale / Wanted
    A long shot I know, I'm new to the forum and have bought an RD03 that I'm wanting to build a Dakar replica. I've talked at length with Jonathan (RR) and can buy the kit new but as ever money is always tight so I thought I would ask on here first to see if anyone has anything that I can use...
  9. Dominator / FMX
    Does anyone know what size bolts are used, to attach handlebar mounts to the triple clamps. Im looking to buy new mounts, I measured the length of bolt but didnt check bolt diameter, and looking on net, some use M12 bolts but some use M10
  10. XRV Swap Shop
    Hello. I am going to attempt to increase the length/height of my existing windscreen by stacking multiple offset windscreens with additional supports. If you have an RD04 windscreen on shelf collecting dust, please contact me. I currently have an MRA Cario Touring screen mounted. MRA is...
  11. Dominator / FMX
    Howzit from SA! Im on my second Dominator rebuild - this time a '95 Italian built model. The rear shock (stock) seems fine, but the spring was crap. The length was well within spec, so I sent it off to be re-tempered. I did this before with my last Dommie, and it worked a treat. Now - when...
  12. For Sale / Wanted
    Hola, A friend of mine, based in Lithuania, has a line on steel cables that can be used to secure items to bikes. As far as I know, thickness can be 2, 3 4 or 6mm (possibly also other thicknesses) and the length is customisable. There'd be a loop at either end and it'd be shrouded in 2mm...
  13. XR
    Ok hi guys new here i've run into a problem and hoping someone can help! so i have xr400 forks on my xr250 and they were in dying need of a service, but i have a problem i dont know if there pre 97 forks or 98 on as this changes the fluid level. now is there any way i can tell what i have ? i...
  14. XR
    Hi guys, a query on my not long owned XR250. I had noticed that my exhaust is somewhat louder than I would like, so I thought I would repack it. So out with the bolts and off with the end and to my surprise I find just a short length of wire gauze, approx. 4 inches long and nothing else until...
  15. Africa Twin
    Hello peeps, this is the third time of trying to post, The chain snapped on my transalp. last week, got away with it, but the sprocket cover bracket bent so a new cover required.My quandary is, l have a complete replacement Africa twin swingarm, wheel and brake, should I upgrade...
  16. Dominator / FMX
    Looking for some help, I've taken off swing arm and linkage + rear shock, all nicely painted and putting it back together now. Issue I have is it seems the bike has shrunk or the shock has grown - I'm about 2in out at the bottom. Original shock and parts all being reused. Anyone know what...
  17. Dominator / FMX
    Hi Everyone, Could anyone tell me the total length of a Vigor please? I'm looking to see if it will fit in the back of my mates van. Thanks
  18. Africa Twin
    Good afternoon everyone, I live in Portugal and I wanted to order online some new spokes (stainless steel) for my Africa Twin RD07 from 1993, I need it for the front rim and for the rear rim. Does anyone know to length / size of the spokes? I believe that the rear rim has at least two...
  19. For Sale / Wanted
    Looking for 5pcs of middle length spokes which are ~173mm (OEM number 426C0-MV1-000) If someone has the and is willing to post to Serbia please contact me on PM or here
  20. For Sale / Wanted
    For sale a *********** shock shock for an xl1000v of any year. The shock has remote preload adjustment, adjustable length and compression and rebound has a 175 - 185 spring currently fitted. Has been in my cupboard for a few years since I sold my first varadero, so would benefit from a...
Top