Hi all, just joined here, need some help.
Partners son has an xr400 that needs to get through an MOT. It has standard indicators with bulbs not LED ones and we are after locating a relay to get these working. For the life of us we can not locate one, can import one from Australia of all places...
Help please! I've set myself the task of replacing my rear brake pads but I've fallen at the first hurdle.
I can't for the life of me see how to get the pad retaining pin out. I can't see any threads / hex heads like on my other bikes. I can just about see a tiny hole where I guess an r-clip...
I've not posted for ages, I've been a touch busy with other bikes/hobbies/diy and life. I've also not ridden my XR for some time due to pain in my right foot as I found kicking it over was far from comfortable, even with an enduro boot on.
Today I go the results from the doctor...
My 04 650 alp has clocked 31,400 miles from new and is still on the original chain and sprockets, I know the green zone wear indicator will only be a guide to chain life but in the five mil. width the green has I still have one point five mil. left. Also the difference in chain play only varies...
I have a pair of xr650r wheels with tyres for sale.It came off my xr650r ,I am converting mine to supermoto!! :-P
Wheels are in good conditions ,it has an upgraded hub in both wheels!! Plenty of life left on the Dunlop tyres..
Please click on link below for photo..
Price is £340...
I have just been offered the bargain of a lifetime or is it?
Its a 1961 Norton Slimline Featherbed with a few bits n bobs and I was wondering if its worth the sellers asking price?
It has Danish registration papers too.:thumbup:
It obviously needs a few bits n bobs and I am not keen on the...
Hello. I am writing to learn if any XRV750 owners may have learned of premature countershaft or output shaft wearing and continued to ride while monitoring the wear rate.
The first image reflects approximately a 30-40% reduction in the width of the splines. Also, please note the condition of...
I need some advice.
I have been offered a Yamaha TZR 250 from a mate as a project for jnr when he heads back to Technical College to start his third year of his bike mechanic education in september.
I would like to know if there are any usb cameras available on the market that can be used to...
I'm in the process of bringing back to life, after five years of hibernation, a 2000 year registration Dominator, but have encountered a few issues while sourcing parts. My frame number is ZDCRD08AOXF321107. Is there a way of breaking down the frame number to identify model year, import model, etc ?
Well with the old Vara now gone I have the following bits available for free
SW motech luggage racks with most the fittings
Crash bars with no fittings
Both are rusty/scratched/dented/very well used
Could be brought back to life with a good wire brush and a tin of Hammerite!
I can't be...
I'm looking for a few bits and bobs for a 1992 Africa twin that I'm bringing back to life and hopefully going to use on a few Europe trips.
has anybody got some engine bars , headlight protectors (the wire ones) a decent aftermarket seat and any panniers ?
thanks in advance dave
Trip Master works well until.. I put the lights on..
Anyone has any thoughts on the above problem? Even the parking light sets the Tripmaster dead until I put the lights off again.. it comes back to life after a couple of seconds.. Mind boggling.. I even removed all bulbs to understand if it...
I've finally succumbed to a sat nav and am looking at how to wire it into my trusty Transalp (XL700VA).
I'm sure that somewhere on this forum I've seen that there is a spare connector block in the front cowl that can be used as a power source - but can't for the life of me find it now!
Around the World on Two Wheels, Vagabond Style
We have dreamed of it for many years, until we finally plucked up the courage to leave it all behind.
After 3 ½-years travelling around the world on Honda Transalps we are now back and ready to reminisce about the 114,000 miles that have passed...
i'm the lucky owner of 2 husabergs 350 and 450, 2014, and 3 husqvarnas
I used to ride MX for 6 years, but since 2010 Enduro and hard enduro have become my life)
I'm also a enduro guide through our beautiful country, and I really love my mission!!
I'd like to meet like-minded muddies here and...
We are brothers from Poland currently live in Peterborough , fascinated by adventures and no ordinary way of life. My name is Marcin(34) and my brothers name is Pawel(33 ) BIKES ----> Currently looking for Transalp 600 or 650 ( june - buying deadline cause i am going...
I did not found any place for a new members welcome post so i am writing it here ( if i'm wrong just feel free to tell me :-D ) :) We are brothers from Poland currently live in Peterborough , fascinated by adventures and no ordinary way of life. My name is Marcin(34) and my...