Honda XRV Forum banner

list

  1. How much is my AT worth ...

    Africa Twin
    Ive got a 96 RD07 in black ... has anybody got any idea how much it would be worth as its havin the frame dipped blasted and powder coated ... new gold rims hubs blasted and again powder coated gold with S/S spokes and nipples front 320mm disc and pads new disc and pads at the back .. ... engine...
  2. Varadero - speedo healer

    Other Honda
    I've recently changed front sprocket down from 16t to 15t. The rideability is dramatically improved around town, but it throws out the speedo. 80mph indicated is in fact 70mph. This is something I can deal with, but the odometer is also out, throwing of total mileage the bike has covered (extra...
  3. Parts list wanted.

    Africa Twin
    Hi Guys, I am in the middle of deciding whether to replace an output shaft on the AT, XRV750 - 2002. Can anyone give me a list of the parts I need to order, gaskets etc to do this job? - gonna use the VT750 shaft. Also is there anything else worth doing whilst I have the engine in pieces?
  4. For Sale: Transalp 600, 650 & 700 T-shirts 2019 'Spring Collection'

    For Sale / Wanted
    Designed by moi - available in the following sizes: S 34"/36" | M 38"/40" | L 42"/44" | XL 46"/48" | 2XL 50"/52" £19 UK, £20 EU & £21 Rest of World (PayPal) - Gathering orders so PM me - The 600 came in a whole rainbow of colours so check the full colour list. Cheers John
  5. High compression piston for Dominator?

    Dominator / FMX
    I'm hoping to build a special dominator motor with a high compression piston - say 10.5:1 No problem I thought, as Wiseco do them for the XR650L - which is the same as the Dominator right? Does anyone know 100% for sure if this is true of all XR650L motors because the Wiseco catalogue does not...
  6. Fuel pumps - will an RD04 fit an RD03?

    Africa Twin
    Fuel pump playing up again, going to swap the points but would like to pick up a spare. RD03 pumps don't seem to be available but pumps for later models are. There looks to be quite a difference in list price which makes me wonder if they are very different, any one tried fitting a later OE...
  7. Honda XL125 (1978) How much is it worth

    What's it worth?
    Hi, do any of you guys have any idea what a 1978 Orange tank black side panels Honda XL125 is worth at all please. She has seen a lot of better days, bit scruffy and in need of quite a few parts inc wiring harness and silencer. Got a dink in the tank too. Got a list of about 30 bits to find...
  8. Hi everybody

    I'd like to introduce myself....................
    Yet another bike forum on my list, well I have gone and done it, I have been mulling over it for a while should I shouldn't I get a dommie, so here I am looking and watching what all you guys are getting up to with your spanners, hammers, and welders etc etc, so as far as my own dommie is...
  9. A link to links on stroke site to Honda info

    Mechanical Advice
    A link to some links! https://4strokes.com/viewtopic.php?f=45&t=759 4stroke site has collated a list of links to Honda related sites eg Honda press packs from 1998 to 2009
  10. Ordering bolts help

    Africa Twin
    I am using this site to try and order some bolts that I require to put the original backend on the bike https://www.fowlersparts.co.uk/parts/5157420/xrv750v-1997-e/seat-2 question I have is this, to order the bolts for the carrier(I have the collars) it shows bolt number 27 for the middle...
  11. NX650 Bearing Part Number

    Dominator / FMX
    On the off chance, does anyone have a list of bearings required to rebuild a 2000 nx650 (not engine internals). Wheels, Swing Arm, Linkage etc As a lot of people have rebuilt theirs, thought they may have a list lying around with this info on.
  12. Foot pegs for XL700 from other bikes

    Transalp
    Hi I am trying to find a way of adjusting the rider foot pegs position on my XL700. The stock footpegs are in my way when I stop at the traffic light and I want to move the 2-3 cm to the front or to the back. I know that SW-Motech had some pricey kits for the XL700, but are not available...
  13. For Sale: Honda Africa Twin XRV 750 - custom comfortable seat

    For Sale / Wanted
    Newly hand made rebuilt, based on used original Honda part Inside special 2 type of modern foam Extremely comfortable for long trips but still well for off road riding Leatherette on the top with similar color to match original look of XRV Hand made needlework on both sides in original white...
  14. New Owner

    Africa Twin
    Hello everyone, After 24 years finally achieved my bucket list motorcycle. It has and always been to own an Africa Twin. So, I finally picked one up albeit not the exact one I wanted but... I've got one finally. The "dealer" said it was a 2000. I was highly skeptical, especially when I pulled...
  15. XL700V o2 Oxygen Lambda Sensor Eliminator, what is the resistor value?

    Transalp
    hello all, looking option to de-cat the XL700v and the good old problem with the oxygen sensor comes back seeing a 10£ resistor makes me wander: what is the resitor value? o2 Oxygen Lambda Sensor Eliminator For Honda XL 700 V TRANSALP 700 2008 - 2015 | eBay next would be a universal 50mm slip...
  16. Stefter Reinforced Sprocket

    Africa Twin
    Hi there, Does anybody got a spare reinforced sprocket and wouldn´t mind to sale it? Tried to contact Stefter the french guy who make them with no success...and also the waiting list seems to be a mile long. My countershaft is too knackered to carry on using the bike! Thanks in advance!
  17. What´s your plan for 2017?

    Travel
    What´s your plan for 2017? Our "list" for next year: a short trip over the Alps in early summer and from late September on for the rest of the year through Spain and Portugal. Where are you going to ride in 2017? Cheers Frank
  18. Reinforced sprockets by stefter

    Transalp
    Hi everyone. Due to popular demand, I am starting another group buy for the "world famous" Stefter sprockets. On the last GB we had several of flake-outs. It is not disastrous as I still managed to sell everything, but it just took longer than expected. The next Group Buy will require a...
  19. Reinforced sprockets by stefter

    Africa Twin
    Hi everyone. Due to popular demand, I am starting another group buy for the "world famous" Stefter sprockets. On the last GB we had several of flake-outs. It is not disastrous as I still managed to sell everything, but it just took longer than expected. The next Group Buy will require a...
  20. For Sale: 1980s XL250 Parts

    For Sale / Wanted
    I hope this is OK to list here but i have a lot of 1984/85 XL250 USED parts for sale. There are too many to list here but i have many engine parts from complete engines to barrels, heads, crankcase covers, clutch and gearbox parts, electrics, carbs, cables plus many more parts. Let me know if...
Top