Any opinions on the speedometer overlays I have seen? I’m back in states with rd07a and would like to change speedo over to mph now from kph . This is a lot cheaper option versus full speedo replace. How hard if someone has done
Looking to replace all the fuel lines on my RD03 as a couple more leaking a bit nowadays. Rugged roads has 4or5 sizes. What is most common I would need? I plan on buying some bulk lengths. They have 4.5, 5.5, 7.3 and 8mm ID. Mine are so old going to be hard to determine sizes. I know I have used...
I did a quick search in the forum but didn't find anything similar to my issue.
My 2nd gear rattles quite a lot when I open the throttle throughout all the rev range. The rattle occurs only in 2nd gear and only during aceleration. I'm sure it comes from the gearbox and it's not something...
Just thought I'd ask on here before I put a good hole in £300... does anyone have an oversize tank for an '02 XR400 floating about? Was after the IMS 4.0 gallon one in Natural colour, but would also be happy with a Clarke or Acerbis.
Done a lot of looking around, and 98% of them are...
So the weekend was supposed to be a wife free bike stripping and rough tickover solving couple of days with maybe a cheeky ride out or two.
All started well other than an exhaust valve inspection cap trying to break while being removed but I managed to remove it with only minor damage. The...
Really hoping one of you knowledgeable folk on here can help as I'm having issues with the bike popping on tickover (tickover problems seem common for the nx650 by the looks of things). Sometimes the revs will hang high after small throttle input and other times the revs will drop and die but on...
I am doing a lot of off-road with my Africa (RD07) and in standing position i can't reach the rear brake pedal. So i am looking for a foot brake lever extension. Any suggestions? Do you think this do?
I recently bought my first AT RD07. It`s an import from Austria, and I`ve learned that those models are restricted. The restriction in the inlet has been replaced with normal full flow inlet rubber manifolds/isulators by PO.
But what about the camshafts they put in the Austrian models...
During our move a box has been misplaced :(
Now I have time, space and money to start this rebuild.
A lot of xrv rd04 have been broken for parts but no one seams to keep the little things !
Pricing these small items new, very expensive.
I have a collection of spares for both XL 125 and 185S models from around 1982 accumulated by may Father over the last 10 years that I feel deserve a better home than the corner of the garage
185 Drum Forks
125 Disc Forks
Front and rear wheels with Drum Brake
Front Wheel with...
My 2001 AT has 18,000 miles on it. It runs poorly and stumbles and vibrates a lot. Over the winter I think a carb strip and rebuild is in order.
Any thought as to have far should I go?
Fit new jets, gaskets, etc?
Replace diaphragms (if fitted)...
Hi guys I have been an avid member of this site for a few years now.
Suddenly and for no reason the site refused entry.
I have been in contact with a really helpful and patient admin guru called Kevin who after a lot of messing about for him sorted my it issues
Big up for Kevin thankyou
Hi, do any of you guys have any idea what a 1978 Orange tank black side panels Honda XL125 is worth at all please.
She has seen a lot of better days, bit scruffy and in need of quite a few parts inc wiring harness and silencer. Got a dink in the tank too.
Got a list of about 30 bits to find...
Hello guys , bought my first Domminator a VERY tidy 1989, one owner from new with only 7500 miles , yes i know if to nice to turn into a scrambler but sorry the angle grinder is coming out:toothy8: if any one wants redundant OE parts give me a shout .
Would like to get it...
Hi. I have had my 99' TA 600 for a while now, and I want to make my bike a little less soft, and also try to lift the rear a bit.
Is this possible just by modifying the original parts? Has anyone done this before?
In the front I added a few mm. of fork-oil, and changed the viscosity. That...
Hi everyone. A few years ago there was a lot of discussion about big bore kits for the XRV750. The thread kind of tailed off, and I never did read of one that actually got finished at 850cc or even bigger. Are there any completed projects out there? cheers Steve
Hello guys ,
i was just wondering if anyone tried to replace the rear shock from another model Honda/Yamaha..etc ?
the aftermarket is too expensive and new OEM as well . i see a lot of good rear shocks in good condition and cheap as well from other bikes
any idea ?
Has anyone recently bought a chain and sprocket set that they were happy with, if so from where?? I see they range a lot in price - from £60 for a Chinese special to £150+
If there any 'don't touch' - please let me know.
NOW SOLD>>>>>>>>>>>>>>>>>NOW SOLD>>>>>>>>>>>>>>NOW SOLD
Full set of Givi Trekker Monokey Panniers with liner bags & Top Box. The top box is the large one to take 2 full face lids, and the panniers are also the large versions. The panniers come complete with the lining bags. All items in...