Honda XRV Forum banner

missing

  1. Africa Twin
    My 1994 RD07A is intermittently missing a beat at idle? It does need some carb work and is idleing a little high. But every once in a while it seems to have a little hiccup. There is a mechanical “click” sound then a miss in the RPMs. It’s just for an instant, then returns to normal. This...
  2. Transalp
    Hello, i notice one of my grommet's is missing and I would like to replace it Looking at the Honda diagrams they seem to be coming up as Air Cleaner Case Grommet's and the part nr is 83551-300-000 Can anyone confirm ta Rod
  3. For Sale / Wanted
    Got the Alp on the road today and I'm already missing the throb from an after market exhasut can fitted to a V-Twin engine. Had a Laser Pro-Duro on my last one and the sound was wonderous :D:thumbup: So . . . . . anyone got a half decent exhasut can for a 600 alp that they'd be happy to part...
  4. Dominator / FMX
    Help please! I've set myself the task of replacing my rear brake pads but I've fallen at the first hurdle. I can't for the life of me see how to get the pad retaining pin out. I can't see any threads / hex heads like on my other bikes. I can just about see a tiny hole where I guess an r-clip...
  5. Transalp
    I've just had to have my XL700 Transalp in for a service. They've informed me that the main stand is knocking against the frame and the cat because it is missing a "bump stop". Must admit that I recall it banging when you put it up but think it has done that since the day I bought it. Could...
  6. Transalp
    Hi all, New to the forum so go easy on me... Just after some advice. I'm attempting to put some oil on my throttle cables but the cables are super tight and I'm struggling to release them. What am i missing? I have a 700. Cheers
  7. For Sale / Wanted
    Pair of Givi Pannier Racks for Monokey Cases. Suits XRV750. Givi Part Number PL148. In very good, almost new condition in black. Comes with, as supplied fixing, fasteners & spacers. Please note, one of the rubber stand offs is missing.... in my garage somewhere, but is currently hiding! These...
  8. Transalp
    Hi I was looking for the fuel cut off relay on my 2004 TA as I'm missing the one off my AT wiring harness and wondered if this will work? trying to get things sorted so i can crank it over..Cheers
  9. Transalp
    Hi, I've just bought a '93 xl600 transalp and when removing the front wheel found the nut to be very stiff and the wheel binding in the calipers. Took the wheel off and on replacing found that as I was tightening the axle it started to get very tight but the forks were not yet touching the wheel...
  10. Dominator / FMX
    Could anyone show a pic of the rear footpeg springs ? Mine for some untold reason are missing, i am reluctant to shell out for new pegs for the sake of a couple of springs but have no idea what they look like so cant start a search. Its an 89 model :rolleyes:
  11. Africa Twin
    My headlights stopped working because a wire came loose from the back of the fusebox.(see pic) Probably I can simply stick the wire back where it came from and squeeze the metal clamps tight again. As you can see on the pic the clamps (where the wire should be fitted) are visible in the...
  12. Africa Twin
    I'm having trouble removing the inner speedo cable on my AT. It broke about 30cm from the top and I am trying to push the old one up from the hub end and it doesn't budge. I've been somewhat forceful and no go. it spins however. Also worth noting that I have spayed a bunch of WD40 in the casing...
  13. For Sale / Wanted
    morning chaps,im just restoring a 79 xr 500 and am missing the speedo anybody got a speedo for xr 185/250/500 twinshock model?ta mark
  14. Dominator / FMX
    Just wondered if anyone ever found or has a service manual for the NX650 Dominator for models newer than 88-89? The 88/89 is the only one I can find so far, and it's missing a few things for newer models such as my '95, for example the rear disk brake, the shorter inlet manifold, the different...
  15. Dominator / FMX
    So I went to see just how deep the rabbit hole goes and completely tore my dommie apart for a restoration. I'm currently rebuilding it, and I've changed the pads on the rear, but there is only a pin to secure them on one end, which means that the pads won't stay in the caliper! What am I...
  16. XR
    So i have a Honda XR200 that I am slowly rebuilding I am no expert when it comes to motorbikes. I am currently working on the brake side of the rear wheel I have fitted the brake hub but I have noted that there is still a gap on the wheel when the brake is on and i don't know what part I need...
  17. Bikes For Sale / Wanted
    Honda xr250 electric now sold Bridgestone gritty ed2 rear Trailmax front . Split but with a spare plus innertube Mot 08 04 Kyb rear shock Renthal bars Pro grip grips Digital clocks Rear battery cover gone missing stored in a dry place for ten years Needs tank cleaning inside before running...
  18. What's it worth?
    Hi I have recently removed all these items from my 87 TA. As you will see in the pictures that they are differing condition. Some have lugs missing, some have scratches etc Also included is a red nose cone which I originally bought off ebay to replace the butchered one in the pics. I am...
  19. XR
    Hi, I am a complete newbie to motorcycling and I am looking for help. I have been given a Honda xr 125 with electric start, I have now sourced a carburetor which was missing and a battery. The problem is I have a rats nest of wiring and I don't have a clue where to start, the few wiring...
  20. Africa Twin
    I am lucky enough to have both the original exhaust and a laser exhaust on my 1995 rd07. They both came with the bike. I like both, even though I prefer the laser one. But it is loud. Very loud. I suspect that it has been modified at some point. From YouTube I see that there is a piece inside...
Top