Transalp 650 rear carrier with fittings to also fit XRV750 RD07/7a As I have now fitted my Africa Twin (750) with an original carrier the Transalp 650 one that I had fitted is now for sale. The rack itself was not modified but I made some fittings so it would fit the Africa twin as described...

Does anyone have the link to a gallery that stormforce collected of modified Africa Twins I found it once but cant find it now....thanks

Does anyone have a wiring loom from a XR650L for sale? Condition not important as it will likely be modified anyway so the cheaper the better, I'm just looking for a decent starting point.

The rear shock on my RD04 is really harsh at holes and bumps, and it goes thru the whole bike. Its feels like the compression damping is too hard. I have tried to adjust it, but I can’t feel any difference. I have 30 mm free sag, and 70 mm rider sag, so the spring should be ok. (from the...

I'm hopeful to get the old Dominator back on the road this month, however a friend advised there are new MOT rules regarding the exhuast noise. His CBR300 recently failed a test with a modified exhaust. Now my Dominator has a single exhaust and its loud, not as loud as some bikes but I'm...

Have just discovered that the spacers within the rear linkage are no longer available. Two of mine were completely seized, the smaller one where the shock attaches is available from Honda but neither of the longer ones are. Has anyone found a similar part that will fit or could be modified...

Hi members. I'm working on a friends RD07 which he's trying to "bring back from the dead". Long story short. The original engine blew (or got blown) and he bought a new one from a stripped down bike. His bike is a RD07 XRV750 T which has onepick up/pulsar coil listed on the Haynes wiring...

Hi, I've been going through my bro's stuff and found what seems to be modified front sprocket amd what I think is a lift kit. Can anyone tell me the benefits of these? Cheers, Stewart.

Of all the bleedin' Transalp screens I've had over the years and then modified/wrecked/sold/given away.... Anyway, what have you got laid about in the garage, needs to be mid/dark tint and decent condition. Phil Sent from my SM-A320FL using Tapatalk

I have a slim Arrow silencer fitted to my RD04 which makes the offside(UK) pillion footrest appear to stick out. As I do not carry a pillion I have removed the large pillion footrest castings and replaced them with footrests that screw into one of the casting mounting points and short round head...

Just wondering if anyone got any photos or advice for the modifications needed to fit my CG125 tank to my Dominator?? Any Help would be much appreciated? As they say, a photo worth a thousand words, so a photo of the underside of a modified tank would be ideal.

Hello guys...i just sold my 650 transalp (modified with AT parts) to get a 2002 Africa. I must say. Im in LOVE !!!!!!!:toothy10::toothy10::toothy10:

I am lucky enough to have both the original exhaust and a laser exhaust on my 1995 rd07. They both came with the bike. I like both, even though I prefer the laser one. But it is loud. Very loud. I suspect that it has been modified at some point. From YouTube I see that there is a piece inside...

Thought I should stop lurking here. Hello. It was once a 1987 Transalp. I bought it off a mate. He had it modified. Then I put my hand to it. I like to fiddle and change things. So one day to the next the bike can be changed. What it looked like when I bought it. I have had to...

hi, i'm josh from dorset, i am planning on buying a transalp in the next week or two (as soon as my guzzi sells). over the last couple of years i have had several bikes, all of which have been too old and unreliable to depend on as a workhorse. my first bike was an XT 600 34L which although i...

I'm considering ways to store a bit more weight further forward on the bike (RD07). Let me know if you have any of the following for sale: - Front rack (above/below headlight) - Modified sump guard with storage for tools etc - hard or soft tank panniers - soft tank bag (~15l minimum) Matt.

the modified dommie tank on my sidecar has rotted out,I can either buy another and fill the front where the fairing fits and close the frame hole with a plate or will an slr one fit. The slr doesnt have a fairing so the front of the tank is already smooth,if the front mount and rear bolt line up...

Well like many of you ive been waiting for the new AT now for far to long. Well its here and by all accounts its only the name it carries over. There is no silky smooth twin in the middle and its all gone very much the same as the rest. Not saying its a bad bike im sure or hope people and the...

I have a TA650 and have owned TAs most of the time since the early 90s because they suit me and they do most things well. I have not ridden the new CB500X but the impresson from the posts on many websites is they appear to be the new Transalp relative to the new Africa. They appear to be capable...

Has anyone fitted or modified the rear number plate unit? If so any pictures of mods. Can't seem to find a tail tidy unit for 700.