Honda XRV Forum banner
mounting
1-20 of 208 Results
Advanced
  1. Transalp
    Hi all, I am keen to get a proper top box for my TA (and stop worrying about my luggage flying off behind me while I am riding!). I have found the Alpos 'panniers' on eBay for reasonable money (see here), and I was wondering if anyone had an experience with them? Are they strong enough to be...
  2. For Sale / Wanted
    I am selling complete Pannier System from Hepco & Becker Alu Sideboxes and upper AluBox With steel support mounting Side and upper carrier. All original HEPCO & BECKER, germany made. Just to mention: I just bought my new RD07a and imported from Germany. Bike has 45K km on the clock and was...
  3. Africa Twin
    I'm looking for some help on the mounting of the chain slider. I've been working on a restoration and it has been some time since I've been at it due to health reasons. When I went to put the slider on, the mounting point does not seem to be right. I'm wondering if one of the points has been...
  4. Dominator / FMX
    Hello! A quick question: are there any differences in the back-cover (most importantly in mounting points) of the speedoblock depending on the generation, i.e. are they identical and/or swappable? Happened to break the mounting ears on mine of a 1995 RD08 while carelessly tackling a motocross...
  5. Transalp
    I've seen multiple people on this forum fit an AT sumpguard on their 650 Transalp's. But how? :o I don't think the mounting points line up. The AT one has 2 in the front instead of the TA's 1... I found a user named Tramp talking about a recent post he made where he explained it but i can't seem...
  6. Mechanical Advice
    Im Looking for tank badges/logo for my CG125 tank. The spacing between screw mounting holes is 60mm, but all the badges i can find on fleabay are 67mm spacing between holes. Anyone bought any of these in the past for their CG125 tank with 60mm hole spacing?
  7. Dominator / FMX
    Im Looking for tank badges/logo for my CG125 tank. The spacing between screw mounting holes is 60mm, but all the badges i can find on fleabay are 67mm spacing between holes. Anyone bought any of these in the past for their CG125 tank with 60mm hole spacing?
  8. For Sale / Wanted
    Genuine Honda large top box.white with blue centre (easy to paint to match you bike) Backrest pad,two keys and has mounting plate and all bolts. Was fitted to my 700 T.alp.Would fit many other models. £70 Based Wirral CH42. Cheers Dave
  9. Transalp
    Ok so I've just got an 88 TA and will be sripping and restoring it over the next couple of months. What i am wondering is, is it possible to change the TA headlight mounting frame, headlight and top fairing and fit the AT headlight frame headlights and top fairing without too much trauma? Love...
  10. Transalp
    these don't come up very often: https://www.ebay.co.uk/itm/Genuine-Honda-Transalp-Top-Box-Rack-Panniers-Frames-Full-Mounting-kit/223332575411
  11. Photography
    Hello, fellow two-wheelers! I consider mounting a (double) dash cam on my bike, and I can´t navigate in the jungle - I would rather get tips from experienced people in here. INNOVV seems to be a good choice, but one place it was mentioned that it stops recording for a short period of time now...
  12. CRF - New Forum!
    just wondering if any one out there has tried put put a twin pipe of a 2013 450 on a 2005 . if so what mods needed , my thinking is that i would need to make a mounting point on the rear subframe for the can and a new panel to clear the can. any help please , and does it give any more power ?
  13. Africa Twin
    Hello People, A mouse some how got into the left side fairing area and chewed up the entire CDI rubber mounting bracket and a few wires...beyond use now. I am trying to source this rubber bracket. Honda refers to it as - CUSHION CDI UNIT Product number: 30401MY1631 Item no: 1 shown in the...
  14. For Sale / Wanted
    Part number is 45210-MY1-006 or 45210-MAY-006 for XRV750 1999. I believe the same part is on the Transalps. This is the black plate that mounts the Left caliper to the fork leg. Like a complete idiot, I rode off with my disc lock still on, which broke the lower part of the plate when it made...
  15. Africa Twin
    Has anyone had any experience with pod filters such as those that can be used on the Honda Hawk https://www.hordpower.com/index.php?main_page=product_info&cPath=1_40&products_id=148&zenid=t9gtpas51iqqntkum9bdb167i5 My airbox has seen better days I think the snokel pipes have shrunk / degraded...
  16. Dominator / FMX
    The first thing to say is that my Dommie is very much a winter hack, ridden in all weathers, rarely cleaned, not a concours show bike by any stretch... so it’s not a massive surprise to see some corrosion on an 18 year old bike. Question is: what to do about it! The pic attached shows a hole in...
  17. What's it worth?
    As above, these are all I have left, sob, sob! They are all used, the bars and stand could use a spruce up but, the box is good and comes with all the mounting kit and keys. It matches the bike and looks really smart. A rough guide price would be great as would any offers before the eBay...
  18. Dominator / FMX
    I was wanting to fit the Acerbis 23lt fuel tank to my RD08 but am advised it only fits the RD02. Does anyone know whether it can fit with a little bodgery before I lash and just try it? There will be the mounting of the tank itself and then the front fairing fit. Any assist greatly...
  19. For Sale / Wanted
    looking for a grab rail complete if possible with black plate and mounting bolts..thanks ..for a 98 AT
  20. Transalp
    can anyone tell me the correct way up for the forked arm on the rear suspension of a 650 tranny. mine is fitted with the lower shock absorber mounting lug being lower than the pivot point but this photograph shows it the other way up ie with the shock mounting above the pivot
1-20 of 208 Results
Top