Honda XRV Forum banner

mounts

  1. bash plate mounts

    Africa Twin
    Hi all ,does anyone have for sale or know where i can get the rubber grommets which mount the bash plate to the frame mine have perished and i dont seem to be able to locate the grommets locally .. Will i have to go to a Honda dealer ? Any one with an alternative or like i said, some spare for...
  2. 84 XR 350 engine removal.

    XR
    Hello everyone, I'm having a difficult time removing my 350's engine. I've followed the manual and have removed everything and I've even removed all the engine mounts. However, when I try to remove the lower left engine bolt it doesn't have enough room to come out before it hits the frame...
  3. Dommie Handle Bar mounts

    Dominator / FMX
    Does anyone know what size bolts are used, to attach handlebar mounts to the triple clamps. Im looking to buy new mounts, I measured the length of bolt but didnt check bolt diameter, and looking on net, some use M12 bolts but some use M10
  4. Refitting Engine

    Dominator / FMX
    Need to temporary refit the engine back into the frame of my Dommie, so i can finish off custom subframe and exhaust mounts etc. ;Anybody got any tips on the easiest way of doing this ;I better eat some Wheatabix because i found it heavy to lift out
  5. Pelican cases on Givi racks

    Africa Twin
    Anyone done this? I'm looking at trying to find some brackets to get it done. Caribou cases brackets are $$$ as heck. Thought of trying Heavy duty case mounts. The Givi boxes I got are way too big 45ltr. boxes and my spare 1550 pelicans are to big as well. Trying to keep bike as close to bar...
  6. What do you all think?

    Dominator / FMX
    I bought a new (to me) tank and rear end off eBay the other day and have chopped bits of the rear frame and original tank mounts to get them to fit so there's no going back. So what do you think? I have no intention of ever making this bike a pretty show winning bike and the seat will be...
  7. SLR-FX-FMX Frame differences

    Dominator / FMX
    Does anybody know what differences (if any) there are between the SLR/FX and the FMX650 frames? I know the SLR and FX are identical because I've turned an SLR into an FX and vice versa. I'm interested in re-framing and older Vigor into an FMX650 to get a 2007 registration number. I can see the...
  8. Tansalp XL600VV forks

    Transalp
    I have damaged the left hand fork slider (bottom at the thread where the spindle screws in). I can get second hand ones from ebay but they are from the single disk model. Now, the single disk model has the disk on the l/h/s, good, I obviously need the mounts for the calliper, but are they the...
  9. For Sale: transalp front wheel hub

    For Sale / Wanted
    Anyone interested in a 1999 xl600v front wheel hub twin disc, open to offers. The hub is in great shape no broken spoke mounts or stripped threads on disc mount bearings only 500 mile just over a year.
  10. Honda xr80 engine swap to 125 eg. Cg125? Any help appreciated

    XR
    Has anybody ever put a Honda 125 eg. Cg 125 engine in a Honda xr80 1987 ? Just wondering if the engine mounts are same/similar ? Is much fabrication needed if any ? Any help appreciated Thanks
  11. will slr tank fit dommie mounts

    Dominator / FMX
    the modified dommie tank on my sidecar has rotted out,I can either buy another and fill the front where the fairing fits and close the frame hole with a plate or will an slr one fit. The slr doesnt have a fairing so the front of the tank is already smooth,if the front mount and rear bolt line up...
  12. Wanted: XL600V Nonfango fitting kit

    For Sale / Wanted
    As title, only need the brackets as I already have the pannier mounts. Don't care if they are rusty or in need of repair. I know this is a long shot but you never know! Lol Or if anyone knows where I can buy a set, let me know. Cheers
  13. Heed Engine Bars don't line up

    Transalp
    Hi all, has anyone else fitted these. The right side is no problem but the left side doesn't quite line up with the engine hole mounts. They're just a few mm off lining up. I'll have to get it milled out somewhere, just wondered if anyone else had come across this. Sorry about the poor photo...
  14. Wanted: Standard exhaust bracket for original exhaust 1993-2000

    Bikes For Sale / Wanted
    Hi hope someone as one about they don't need I am after a bracket(18360-MAY-620) which mounts the exhaust to the frame towards the back of the exhaust on my africa twin
  15. transalp 700 info

    Transalp
    Can any transalp 700 owners help me please I need some pictures of how the engine mounts to the front of the frame Also the width of the mounting point between the swingarm if possible!
  16. Newbie in search of an engine part

    Africa Twin
    Hi all I am having a tinker with my recently purchased RD04 and have found the generator cover on the side of the engine is broken. The tag that mounts the screw that holds the sprocket cover has snapped off. If anyone has a generator cover, please let me know. Cheers
  17. Wanted: Right Front Master Cylinder+R-Pillion Foot Peg for RD07

    For Sale / Wanted
    Trying to replace these two parts after neighbour knocked over my AT while She was parked. The actual cylinder is fine its the mirror that's broken at the base and of course, it mounts onto the master cylinder. Had the foot peg pieces welded back together but its bent out of shape so is likely...
  18. Varadero GPS mounting SD01

    Varadero
    Recently bought a 2001 plated Varadero. Planning a trip to Russia next year and looking for mounting for my Tomtom and Delorme. I have ram mounts but find they hide the clocks Wondering if a brace bar on the handlebars would help
  19. RD04 parts for sale

    Africa Twin
    Hi, If anyone is interested... All items available are on these photos. All the original bolts/ mounts, I have used so they are not included. Parts are used, none broken except the rear fairing where my finger is pointing. I can ship via currier service troghout EU. Payment via Paypal. If...
  20. What to disconnect before welding?

    Africa Twin
    I've got to weld a new bash plate mounting lug on my RD07. Obviously I don't want to fry anything, what do I need to disconnect or unplug? The lug is where the LH engine crash bar mounts. Cheers Chris
Top