The brake light switch unit that sits behine the frame, moves when | put the rear barke on and hence doesnt activet the light. it sort of moves backwards at an angle. If I hold it in place the light works but then stays on until I let it go. Any ideas on how to sort this? I thoght of a zip tie...
. Hi . The header brackets that hold the pipe into the head on my 2002 xr 250 are shot .. corroded .The pipe moves and leaks . Very soon it will fall off . It looks like these are not seperate ltems that one can buy .. so where can I get spares or a replacement . I have seen front pipes for the...
It seems my tacho is showing the RPM wrong. When idling at ~1000rpm, the tacho stays at 0 and just vibrates slightly. As soon as I open the throttle it moves upwards quickly, but doesn't catch up properly until around 4-5000 rpm. Any ideas what may be causing this? I think it's always been...
My 2002 650 has a floppy rear brake light spring. People usually recommend twisting it to tighten it, but that isn't working here.
It just doesn't transmit the movement of the pedal. Pushing down on the brake pedal, the lower portion of the spring moves, but the top part doesn't.
Get the frame number for my bike??????
I'm putting it back together after being apart for a good few years after I stripped her down to get powdercoated etc, and I've misplaced (read LOST) the makers plate & my log book during various house moves over the last few years. Help please !!!!!!
I see there are two basic designs.
Scissor type where the table rises vertically
or ones where the table moves backwards as it goes up.
Anybody got any idea if one type is inherently more stable than the other or is it simply down to the size of the base on the garage floor?