Honda XRV Forum banner

nec

  1. Africa Twin
    Hi everyone! I recently remove the tank, airbox and carburators to change the main jets after changing to a more open exhaust. Know putting everything back I have a small problem... There is several fuel overflow or drain lines connected together to one main line that dumps excess fuel it...
  2. Africa Twin
    Hi AT friends, would apreciate your help again :) I will get a top end engine job done in Malaysia soon. Hopefully just change of pistons rings, but who knows when opening.. My mechanic (Sunny cycle in Kuala Lumpur) says i might also need a slightly bigger piston. He says you can get pistons...
  3. Transalp
    My ‘93 Transalp 600 was putting out 16 volts when I bought it a few months ago, and had had some meltdown in the distant last. It had an Electrexworld reg/rec on it. This morning I fitted a brand new aftermarket reg/rec to it. Wired it up, mounted it on a nice alloy heat sink plate of my own...
  4. Transalp
    The ‘93 600 TA I just bought has had a bit of a meltdown in the relay/regulator area, but been repaired and has run okay for quite a while. Apparently. When I bought it I pulled the panels, tank and seat off just to have a general inspection. I pulled a few wires out, checked connections and...
  5. Transalp
    Evening all, recently joined the forum after buying myself a ‘93 Transalp. It needs very little doing to it but I’d like to plan some repairs and basics. So, been asked before no doubt, but what’s the best source for buying spares and consumable, cables, electric parts, bearings etc. First off...
  6. Transalp
    Hello folks, I had an intermittent fault with my 700 for months now. Sometimes it would't start and then sometimes engine would cut out when handlebars were turned to the right. Yesterday I decided to have a proper look and after looking for frayed wires or something out of ordinary I pulled on...
  7. For Sale / Wanted
    The part number and description are 17253-MAN-600 TUBE,AIR CLEANER CONNECTING Mines got old, hard, and has a crack now. Cant seem to find any online.
  8. Transalp
    hi Has anyone got a clue how the the little connector to release the indicator wire is released i cant separate then to replace a damaged left hand indicator any help out there Neil
  9. Transalp
    Hi, I haven't been around for a while, having sold the transalp to my brother. He uses it mostly for touring, and so finds the setup of connector pipe and Leo Vince exhaust a bit loud (but it's great fun for hooning around). I've reinstalled the original HEAVY! silencer box for him and am now...
  10. XR
    Direction Indicators Anybody fitted some ?? I tried to fit some today and failed Here's how All bolted up and connected to the existing colour coded bullet connectors in the loom Relay already in place and switchgear present & working Fired up the bike, both rear indicators worked when...
  11. Africa Twin
    Anyone know where or if I can pick up a fuel pump connector plug? I would like to have the facet pump I bought to have as a spare on my next road trip and just put a stock plug on it to have ready. I have a set of new points to put in old pump and would like to keep it in place for now. I really...
  12. Africa Twin
    I am ordering some connectors to renew and modify parts of the wiring loom on my 1988 RD03, but I can not seem to find connectors for the CDI. Does anyone have a reasonably priced lead on these? Also, I am at work in Scotland right now, so I can't look at the wires for my self, but from the...
  13. Transalp
    New Yamaha Tenere 700 at the NEC show...
  14. Africa Twin
    So they have been raving how good the new Africa Twin is yet there is loads for sale with little miles on them so why is this ... Personally for me yes its a modern bike but the essence of the Africa Twin was the V twin engine and the simplicity of it all plus i sat on one at the NEC and i was...
  15. Africa Twin
    Hi all, and thank you for your welcome. Can you carb synchronizing gauges, ones that have whatever is needed to connect to the carbs. Also, where is the take off for gauges on the carbs? Many thanks, Pat.
  16. Bikes For Sale / Wanted
    Honda 1987 XBR 500H cafe racer with/without fairing
  17. I'd like to introduce myself....................
    Hey everyone I currently have a 2007 xr250L ,can anyone please help me with the stupid pipe work that comes off the carby ,that carby is so hard to find a pic of anywhere. it has a black plastic male connection coming off the left hand side near top for one of the suction or pressurized...
  18. Dominator / FMX
    Trying to find out what size thread are the oil connections on my RD08 frame. I know the oil filler cap is M20 x 2.5 Looking to find out what the otherconnections are
  19. Transalp
    So, on Friday night I parked my '07 650 TA in the garage, everything was fine. On the Saturday morning I tried to fire it up and it just spun on the starter with no hint of life. I then noticed the green 'key' light was not going out, so that is the HISS warning light. I've had the bike around a...
  20. Bodgers Corner
    My AT's on it's third headlight fairing (or 'nose cowling' as the parts book calls it). The first two developed bad cracks around the holes into which the side fairing panels connect. I've kept the old fairings with an eye to trying to repair them and have now, after many years, got a plastic...
Top