Honda XRV Forum banner

nx

  1. Parts Sharing?

    Dominator / FMX
    Does the '88 NX650 I just bought share many -- or any -- parts with other models like the XL600 or XR650L?
  2. VIN/Tire Pressure/Model Year Sticker Location?

    Dominator / FMX
    In the box of parts that came with the '89 NX650 that I just bought, I found the metal plate/sticker that shows the VIN, tire pressure info, model year, etc. Where does this thing belong on the bike? I want to glue it back on, but I can't find it on parts diagrams.
  3. Nx650 Scrambler Build

    Dominator / FMX
    Well it's been some time in the making but my first custom bike build is now complete.:D Got to the point where I just wanted it on the road, so still a bit 'ratty' and might strip it all down again one day. But just passed it's MOT and already chucking about some green lanes. To be used and...
  4. Manual

    XL Technical Specs
    Hi I'm new to the XL, I have what I thought is a 1989 XL250R, when I've searched the internet the R model seems to have stopped production in 1987 and was replaced with the NX250, can anyone confirm this. Thanks
  5. Oxford Montreal 3.0

    Clothing
    hello there.Any help for future buying Oxford Montreal 3.0 jacket&pants? I am considering it, but dont know is it too warm for summer riding.Tnx in advance Poslato sa LYA-L09 pomoću Tapatoka
  6. Wanted: Dommi NX650

    For Sale / Wanted
    Has anyone got a nice low milage Dommi for sale in fairly original condition? Anything considered though. Thanks
  7. Dear Pepe. I wish you were here.

    Dominator / FMX
    The last 3 holidays I’ve been on I wished I could have had my trusty nx650 with me as there is no restrictions to riding off road. I’m currently in Sal, Cape Verde and hired a quad bike and had loads of fun but it’s not the same as Pepe. I wish the UK was so accessible to use on a motorcycle, we...
  8. Seat cover NX 650

    Dominator / FMX
    Hi, I'm trying to restore my '88 dommie in factory condition, and so I need a new seat cover (the red one with the simple "honda" on the sides). Do you know some websites or shops wher I can find it (as close as possible to the orginal ?) Thanks !
  9. New shock advice.

    Dominator / FMX
    My nx650 RD02 (1989) is in need of a new shock. The current shock is an old Hagon that is at least 20 years old fitted by the previous owner and I doubt very much it is serviceable by the look of it. Im on a tight budget (meaning I don’t want to spend a fortune) but need to replace it...
  10. New carbs - Options

    Dominator / FMX
    Hi All, I've tried searching but haven't managed to find a definitive answer. Is there a direct replacement carb that would fit a 1999 nx650? I was going to strip and rebuild mine as it's got the usual tickover issue but if there is a better replacement that could be used I may well just go...
  11. Wanted: NX650 Airbox Snorkel

    For Sale / Wanted
    The part number and description are 17253-MAN-600 TUBE,AIR CLEANER CONNECTING Mines got old, hard, and has a crack now. Cant seem to find any online.
  12. Honda NX650 Dominator

    Dominator / FMX
    Does anyone out there have any experience of fitting a Keihin FCR41 Flat Slide Carb to a Dominator? I was told by a carb specialist that this would be an improvement and a little more power. If so, how hard is it and what would I have to do .? Thanks in advance Ian Melrose
  13. XR650L oil pump into an RD08 dommie?

    Dominator / FMX
    Hey chaps, I've just obtained an XR650L oil pump (15100-MY6-670) I understood this to be a worthwhile upgrade from the standard NX5650 oil pump But it doesn't seem to fit. Help! Update: It does fit following some minor mods outlined later on in this thread.
  14. Motogadget M-unit

    Dominator / FMX
    Has anyone ever fitted a M-unit to their NX650 If so, do you have a wiring diagram
  15. Wanted: swap 19"slr for 21" NX wheel and brake. and slr nx carb needed

    For Sale / Wanted
    got an SLR 650 with no carb any condition considered as i will clean and rebuild. also looking to put a 21" wheel and brake in it swap for the current 19" set up ?? cheers Ewen. located in London .
  16. Won't Start

    Dominator / FMX
    Arrrggghhh Not started it for a few weeks, had become more and more difficult to start cold, and now - won't start at all Had lost interest in it lately, now even more so So, after trying to start for a while, (turns over fine), checked spark - nothing I have in the last year or so replaced...
  17. Will a NX650 RD02 Dominator rear wheel fit a XRV650 RD03

    Africa Twin
    My XRV650 RD03 needs its wheels replaced. It seems it was stored outside on grass for about 17 years. I have managed to get a Transalp 21" front in good condition and a ST1000 Pan European front left hand brake disk. Would a Dominator rear wheel fit? Good Dominator rear wheels are cheaper and...
  18. For Sale: Arai tour X3 Tri colour LARGE

    For Sale / Wanted
    Size LARGE Selling as i dont use it and have another tour x, its in excellent condition with only a slight mark on the back where it was resting on the wall on the shelf. There is a stuck on GO Pro mount which can easily be removed. The Senna intercom does NOT come with it and will be taken...
  19. doesn't start Nx 650

    Dominator / FMX
    Hi, My Dominator doesn't start when its oil temperature is between 60-80 C. I did the valve clearance but the problem didn't disappear. What could be the problem? Thanks
  20. Dominator NX650 frame versus XL600 frame

    Dominator / FMX
    Hi, does anyone know if there is a big difference between a NX650 frame and a XL600 Frame? I'm considering to put all XL600parts (fuel tank, seat, lichts, fenders etc on a Dominator frame (+engine)... Maybe also an option would be to put a dominator engine in the XL600? I have no idea how...
Top