HI had a problem with my nx650 carb on my 93 rdo2
Bike starts and idles fine but anything above 1/3 throttle the bike judders and doesn't accelerate further!
Not starved of fuel, carbs been cleaned 3 times and still the same problem.
Cant put my finger on it and dont want to spend odd couple...
The decompession cam on my FMX is gone toast, it rattles when the engine is cold.
I found a good NX650 camshaft, will it fit with no problems?
Has anyone done this? What other things should be modified/adjusted?
Valve clearances after the change? Should I readjust the carburetor?
In the box of parts that came with the '89 NX650 that I just bought, I found the metal plate/sticker that shows the VIN, tire pressure info, model year, etc. Where does this thing belong on the bike? I want to glue it back on, but I can't find it on parts diagrams.
The last 3 holidays I’ve been on I wished I could have had my trusty nx650 with me as there is no restrictions to riding off road. I’m currently in Sal, Cape Verde and hired a quad bike and had loads of fun but it’s not the same as Pepe. I wish the UK was so accessible to use on a motorcycle, we...
My nx650 RD02 (1989) is in need of a new shock. The current shock is an old Hagon that is at least 20 years old fitted by the previous owner and I doubt very much it is serviceable by the look of it.
Im on a tight budget (meaning I don’t want to spend a fortune) but need to replace it...
I've tried searching but haven't managed to find a definitive answer. Is there a direct replacement carb that would fit a 1999 nx650?
I was going to strip and rebuild mine as it's got the usual tickover issue but if there is a better replacement that could be used I may well just go...
Does anyone out there have any experience of fitting a Keihin FCR41 Flat Slide Carb to a Dominator? I was told by a carb specialist that this would be an improvement and a little more power.
If so, how hard is it and what would I have to do .?
Thanks in advance
Not started it for a few weeks, had become more and more difficult to start cold, and now - won't start at all
Had lost interest in it lately, now even more so
So, after trying to start for a while, (turns over fine), checked spark - nothing
I have in the last year or so replaced...
does anyone know if there is a big difference between a NX650 frame and a XL600 Frame?
I'm considering to put all XL600parts (fuel tank, seat, lichts, fenders etc on a Dominator frame (+engine)...
Maybe also an option would be to put a dominator engine in the XL600?
I have no idea how...
Anyone taken the oil strainer out of the bottom of their frame?
Tried removing it yesterday, so i could check it, and get frame ready for powder coat, but could not get it to undo.
Tried interlocking two spanners to get a higher torque, but still no joy.
Any tips on removal???
Anyone recommend some decent brake discs for and RD08 that dont break the bank Running the standard dommie rear wheel with an SLR650 front wheel. Looking on evilbay, prices range from £30 to £130 for a disc??
Looking to rder some chain and sprockets for my 2000 model nx650 build. Anyone know the difference between these two?? one says its an upgrade kit, but is less than £5 dearer?? https://www.mandp.co.uk/nx650-dominator-95-02-oe-did-c-s-kit.html...
After doing a bit of research, and removing the actual bearings im a little confused. Found on forums that linkage bearings were TA1720Z (O.D 24mm, I'D 17mm, Width 20mm) The ones i removed from bike were BM172417-1 (O.D 24mm, I.D 17mm, Width 17mm) Any idea which is the correct bearing to go...
I have an eBay NX650 CDI unit that was given to me by JamieB and I would like to offer to the forum members to be shared to eliminate CDI issues on your bike.
If you are having issues and suspected the CDI, PM me and I’ll send you the unit. Once you’re done send it back or pass it on to the...