Just asking if anybody has experience with JT’s rubber front sprocket on the XRV?
We all know why many use the OE Honda front sprocket but since they cost about €30-35 and the JT cost about €15-20 it could be just as good..
Just for reference the JT sprocket is JTF296-16RB.
Just wondering whether anyone knows of a suitable source for replacement barrel lock for my Honda Topbox on my Transalp XL700?
The one on at the moment is getting more and more fiddly to open every day and is only a matter of time before it refuses to open.
The OE replacement lock set is Honda...
Fuel pump playing up again, going to swap the points but would like to pick up a spare. RD03 pumps don't seem to be available but pumps for later models are.
There looks to be quite a difference in list price which makes me wonder if they are very different, any one tried fitting a later OE...
Brackets for auxiliary fan are back in stock.
You can now run two fans. Ideal for sand and mud riding in hot climate.
You can spot weld them or use a special aluminum glue.
50$ cad a set. Includes bolts.
Only 20 sets available.
Wonder if you guys can confirm what width Excel rims you have relaced to OE Hubs ?
I am a Michelin dealer so want to use Michelin Anakee Wilds so 110/80/19 or 120/70/19 front
with 140/80/17 or 150/70/17
Thanks in advance
Looking to rder some chain and sprockets for my 2000 model nx650 build. Anyone know the difference between these two?? one says its an upgrade kit, but is less than £5 dearer?? https://www.mandp.co.uk/nx650-dominator-95-02-oe-did-c-s-kit.html...
Have just discovered that the spacers within the rear linkage are no longer available. Two of mine were completely seized, the smaller one where the shock attaches is available from Honda but neither of the longer ones are. Has anyone found a similar part that will fit or could be modified...
Hi,Can anyone recommend a good foot stand extension plate for the XL700?I've had a Cameltoe fitted for a couple of year and although it looked good I was not impressed with the way it bent with use and the bolts were continually working loose. So loose in fact that it now lies somewhere along...
Want to make plans for 2018?
The 55 tracks from our adventure guidebooks are the best place to start!
You will get: offroad and tarmac routes, maps, GPS tracks, descriptions, accommodations, sights,
tracks over all the mountains passes of Romania and much more.
Also you get the Touring Romania...
Good evening Ladies and Gentlemen
I hope this post finds you all well on this chilliest of evenings!
I wonder if anyone can offer any advice on how to remove a top box from a Honda Transalp 700 (2008 reg) please. I've been wielding spanners and allen keys in the garage for an hour and I can't...
From The UK Motorcycle Theft Protest fb page ...
"STOLEN MOTORCYCLE K65PPO
My Bikes been stolen from my garage.
It was in a locked garage attached to ground anchor and had disc locks on but they cut thorough them with bolt cutters.
If seen please report to the POLICE"
Last weekend the gearlever on the XL600V got well bent up with the end getting under the footrest...and it could have been a lot of a problem..except i was rescued by a few nice blokes with a big vice and a hammer...ANYWAY...TopBuzz99 had previously put a post on here about a good...
I have an issue with the OE indicators on my 1996 RD07a for the second time since I have owned the bike all the stalks , black rubber parts , have split and cracked off .
Does anyone have any alternative types that will fir , preferably not LED ones , any ideas will be most welcome...
I 3D printed this prototype 3 years ago from a 3D model I designed. Producing them with 3D printing would be out of the question as very pricey. Anyone here in the industrial domain that would know how to produce such grills? They are 300mmx 180mm x 35mm. It is textured because of the 3D...
Second version of a multifunction rear rack. The prototype is bead blasted raw aluminum for now. Installation requires to remove the flimsy plastic rear rack.
This first prototype will require only minor adjustments before entering in production. I may produce a batch for a group buy on the...
Hello friends ,
another selly question from a noob :)
i just bought Oneal boot and its too bulky but nice..problem is.. i tried on and got on the bike. no way to shift up no way to put ur toe under the padal
the padal is already high..not too high anyway but i mean no further adjustments i...
Evening boys & girls,
I've been a member for a while but not had a ' trail ' bike for some time so haven't posted. Just picked up a 700TA.
As is normal with a newbie, I have a couple of questions;
1. Screens.....Anyone used both the MRA Vario, and the Givi touring screen, and can give an...