Honda XRV Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-20 of 91 Results
  1. Transalp
    Hi All, I have been looking at the requirements for ULEZ bikes, and I cannot work out if my 600 will pass or not? I called Honda and they cannot give me a CoC for the bike (too old). Has anyone had the emissions (I think it is only the NoX output that they care about?!) tested? Am I able to get...
  2. Africa Twin
    Hi Guys, I am in the middle of deciding whether to replace an output shaft on the AT, XRV750 - 2002. Can anyone give me a list of the parts I need to order, gaskets etc to do this job? - gonna use the VT750 shaft. Also is there anything else worth doing whilst I have the engine in pieces?
  3. Africa Twin
    Sorry to bore you guys with this but I would appreciate your input. I have aquired a 52 plate, September 2002, AT 750 with 60,000 miles on the clock and a buggered output shaft. I have read most of the threads regarding this topic and seen the posts and pictures of the Spendler sprocket and the...
  4. For Sale / Wanted
    Fancy a project and I know its a long shot but has anyone got an unfinished project or as per title blown engine or worn output shaft and have had enough and what to get rid? I have a few spares and lots of time
  5. Africa Twin
    Hi guys, ..just a short question pls - is it the same procedure to open the gearbox as it is for the Transalp (3 screws only) Want to see if the gear output shaft is ok on a first sight... cheers Mike
  6. For Sale / Wanted
    I have a spare engine for sale It came with a job lot of parts, I only needed the other parts so this engine is redundant It has apparently 30k on it, there is some wear on the output shaft, other then that it looks to be in decent condition Obviously I haven't run it so can comment on its...
  7. Africa Twin
    Hi, I have some troubles with my fuel lines on my RD04. Wich INNER diameter should I use? it seems the tank outpunt diameter is not the same as the input/output for the fuel pump and the inlet for the carburetor. what diameter of tube should I use. I had never problems fitting those, but with...
  8. Africa Twin
    Hi guys, Is it unreasonable to ask a seller to show me the output shaft on an AT prior to purchase? I've come across a mint example that will require an MOT as part of the purchase process. I've asked to see the output shaft during the MOT process - is that an unreasonable request? And once...
  9. Africa Twin
    I'm in need of a favour :D Does anyone have an output shaft from either an RD04, RD07, or RD07A that I can BORROW (will be returned in identical condition after a few days) I need to check some measurements, but am pretty sure that I have found a solution to Honda no longer manufacturing the...
  10. Africa Twin
    Have been sending several emails over the last few weeks to Honda about my hunt for a counter / output shaft RD07A: 23220-MAY-000 and received phone call from them yesterday to say that this part is now officially discontinued and Honda have no plans to do another run of them ! The guy from...
  11. Africa Twin
    Just seen this on facebook and well worth the money if your splines are starting to wear and your worried....nothing to do with me but may be of use KKbike RED CAP 2.0 il salva millerighe per Africa Twin 750 - KKbikeshop
  12. Dominator / FMX
    Hi guys, I'm rebuilding my starter motor as it went caput, stripped it all down put new brushes on and cleaned up the commutator and output shaft, and got all the bloody oil out of it. The problem I'm having though is sourcing the internal bearing and oil seal that sits in the end of the...
  13. Africa Twin
    i am looking at a xrv rd07 over the weekend...i dont mind deep cleening..not so keen on touching up blistered or oxidised engine cases...certainly dont want any deep engine with this in mind i would appreciate any tips on what i should be looking for,,i think i understand the...
  14. Africa Twin
    Is there much extra power on an RD03 for lights etc? May be selling my concours c14 and would like to hookup the led driving lights it has on it to the AT. Also would like a couple accessories outlets . I have an eastern beaver fuse box setup I would run everything through. Thanks
  15. For Sale / Wanted
    I am breaking a 650 transalp engine for parts,all good except the output shaft. tuggy
  16. Africa Twin
    Thought I'd take the opportunity to check out my output shanft as my mechanic is fitting my new rear wheel, bearings, front and rear sprocket and giving her a service. I have to say I was very pleased with what I saw, they look 'as new' to me. The bikes only done 15k but you are never sure...
  17. What's it worth?
    I have an engine complete but stripped due to output shaft wear its done 60 000miles but no ridges on cylinder bores how much is it worth thanks in advance
  18. Africa Twin
    Hi m8 i´me restoring an rd04 . opened the engine to change the output shaft . today i started it for the 1st time but it has a strange rattling noise that seems to come from the back of the engine between the rear head and the starter motor , only does it when on the side-stand and if i...
  19. Bikes For Sale / Wanted
    2002 Africa Twin for sale £2900 For sale £2900 2002 Africa Twin with loads of good accessories, looking to swap for a CRF250L? It has 58000 miles but in good conditional having has engine rebuild and new output shaft bearing. Any interest?
  20. Transalp
    Don't know if anyone has done this before,but I have been through every Thread,all 5652 of them and all the posts 53130 of those and have come up with a question for you all. In all those posts,how many have actually had an output shaft failure on a TA.? You might think i'm a bit sad ,but i was...
1-20 of 91 Results