I seek advice from people with experience with the MRA varioscreen V (new full screen) and the MRA vario touring (clip on top of old screen) part. I suffer from high windnoise on higher speeds.
Been looking for reviews and comparisons, but not alot to find. I'm 6 foot 2 inches high.
I like the...
Hi, just joined this forum as I have just bought a very nice imported ( USA ) 1972 XL 350 that was restored 11 years ago and not been used since. It has been part of a private collection including a Vincent Black Shadow. Plan to put oil down the plug hole for a few days and see how the engine...
Transalp 600 & XRV750 rear lift link SOLD
(Lift handle, silencer sold)
Transalp XL600V 88-94 & XRV750 RD03/4 Extended Rear Shock link for raised ride height.
I removed this lengthened link from a friends 1992 Transalp 600 as it was too tall for him. I now have that Transalp myself as he was...
2003 Africa Twin 21k Miles.
New Black powder coated rims, powder coated hubs and new stainless spokes, Metzeler tyres.
Braided brakes hoses.
New front discs and pads.
Venom exhaust with original as new to come with the bike.
Scottoiler, satnav, heated grips.
The Garmin and holder doesn’t come...
My 2011 Transalp 700 VA has developed an annoying and increasingly frequent fault. Never had any problems with the bike before, engine runs great. 18,000 miles on the bike.
While driving up the M1 last night, on 3 or 4 occasions, when I opened the throttle to overtake, the HISS warning...
I have a red 1999 XL600V Transalp with a damaged headlamp cowl.
I have found a replacement cowl online which is red but I'm not sure the colour will match.
Does anyone know if there were different shades of red used on this model/year?
I've attached a picture of my bike.
It's quite an...
Here I have a 3 part set of Nonfango hard luggage.
It was removed from a 2002 XRV750 but you may know if it will fit other models.
There is a 52 litre top box which will take 2 full face helmets and 2 panniers which are a sort of teardrop shape, one end narrower then the other.
the top plate...
Greetings, I'm hoping someone can shed some light on a little bump in the road I've come across in my build. As the title states I've thrown a NT650 / Bros 650 / Hawk 650 motor in a Transalp frame and my issue is the front cylinder's exhaust port isn't allowing me to get the Hawk's front header...
I had an intermittent fault with my 700 for months now. Sometimes it would't start and then sometimes engine would cut out when handlebars were turned to the right. Yesterday I decided to have a proper look and after looking for frayed wires or something out of ordinary I pulled on...
Hello, i notice one of my grommet's is missing and I would like to replace it
Looking at the Honda diagrams they seem to be coming up as Air Cleaner Case Grommet's and the part nr is 83551-300-000
Can anyone confirm
Hello, I was changing my main air filter over the weekend and decided to have a look at the "sub filter" too. part nr 17259-MCB-610, it pretty much disintegrated when i was cleaning it....
so have two question's
what does it do (i like to know these things)
what can I replace it with, as there...
I have two complete XL 250's I am parting out.
If anyone needs anything I expect I will put everything on eBay but I always try to hit the forums first for the guys looking for one part.
If you need anything specific you can contact me at four 19 90eight 8692 texting preferred or here for a...
I just made myself one of these sleeves out of stainless steel for the rear caliper on a 96 RD08 (part No14 in the link below) hoping i'll never have to replace it again. Its a cheep enough part but i wanted an excuse to use the grooving tool i bought :D
I made two so have one spare if anyone is...
XRV750 September 2002, 60k milage, MOT til Feb 2020
Bike is in Welham Green, near Hatfield Hertfordshire, just north of South Mimms Services on the M25.
Bodywork not bad, no broken tabs or cracks. Tank is good, some small chips around the filler. There must be some marks, after all, the bike is...
My XRV750 CDI (rd07A) is giving probs.. the silicon melted off..
Am looking for a aftermarket replacement as the Honda original part seems very exp.
i tried rugged roads as well, part not avaliable...
Thanks guys! :o
Started the rebuild process last week at last! Thought I would start a tread about it as I do like to read a good rebuild post and happy to receive any suggestions that go along with it. Happy with my progress so far but I think this is going to take a long time before it's back on the...