Honda XRV Forum banner

pin

  1. XR
    hi, i managed to leave my side stand spring in a forest in devon :/ a genuine honda spring i found for 4euros but with 18euro postage !! so im opting for a universal spring, the only thing is i dont know what length to go for. between the pin on the stand and pin on frame is about 170mm but...
  2. Dominator / FMX
    Help please! I've set myself the task of replacing my rear brake pads but I've fallen at the first hurdle. I can't for the life of me see how to get the pad retaining pin out. I can't see any threads / hex heads like on my other bikes. I can just about see a tiny hole where I guess an r-clip...
  3. Transalp
    im on my 3 rd set of pads thought i knew what i was buying i bought EbC FA388, NOW THE PADS ARE DIFFERENT on the one im taking out the hole for the pin is at one end there is a square end for were i meets it resting place ,now the new pads have a cut out on the square end can still use these...
  4. Africa Twin
    I am ordering some connectors to renew and modify parts of the wiring loom on my 1988 RD03, but I can not seem to find connectors for the CDI. Does anyone have a reasonably priced lead on these? Also, I am at work in Scotland right now, so I can't look at the wires for my self, but from the...
  5. XL
    Hello My son has just bought an 85 XL 125 Whilst dooing the deal the seller said I have another 1983 XL 125 in bits in the shed, so I bought it as I wanted one 30 years ago. I now need help as the rear suspension is seized and been cut out! Looking for a parts diagram for it but cant find one as...
  6. Dominator / FMX
    This is the air cut off valve cap Amongst many other things i tried to make sure everything is clean etc So when I tried to blow through this i thought it could be blocked Very difficult to blow through so i thought try pushing something through Tried old fuse wire, nope, tried a pin, nope...
  7. Transalp
    Ever since Ive had the Transalp the seat seems to have been sitting a little high. Ive checked underneath a couple of times and everything seemed normal. Anyway today I had a closer inspection and noticed this pin seemingly not doing anything behind the bolt that holds down the fuel tank. It...
  8. For Sale / Wanted
    I need to find a Triumph cranksjaft pinion puller so I can get the pinnion gear off my cranlshaft... They are for sale for about £50 on ebay and I was womdering if any of you lads had one for sale? I have to get one otherwise I cant seperate the crank cases to get at the crank shaft...
  9. Dominator / FMX
    i have a spare loom which i am mending some broken connectors there is a 2 pin connector green in colour with 2 wires situated midway under the petrol tank the wires are pink and black I have no idea what year dommie the loom came from i am hoping they connect to the later carb with the...
  10. Dominator / FMX
    Hi everybody! After finally getting the right brake pads for my rear caliper I have since "finished" my scrambler in working order. However I still need to fit some gauges and I'd like to take a look at the pin-out or schematics for the original dash before tackling this job :) I would greatly...
  11. Dominator / FMX
    I've recently purchased a 2000 Model Dominator, unfortunately with no key. I took off the helmet lock at the left hand rear frame loop, and the number inside is 382. I have also taken off the ignition switch, and the petrol cap, which both have N08 or 80N depending on which way you view it. I...
  12. Dominator / FMX
    So I went to see just how deep the rabbit hole goes and completely tore my dommie apart for a restoration. I'm currently rebuilding it, and I've changed the pads on the rear, but there is only a pin to secure them on one end, which means that the pads won't stay in the caliper! What am I...
  13. For Sale / Wanted
    A NOS Gasket Left hand engine casing for RD04, 07, 07A The RR listing is here... Yours for the price of a pint plus the postage!
  14. Transalp
    At tomorrow's pub night in the village hall, £2.50 a pint, they have decided to have a bike themed night. I thought Id better give the old Alp a bit of a spruce up. First clean for about 4-5 months. Must say she still looks pretty good. ? Nick. Sent from my LG-H815 using Tapatalk
  15. Ride Reports and Pictures
    Heading home from Spain a couple of days ago I rode a stupid 750 miles in one day of a two day journey of 1235 miles. Here's my favourite picture of the trip. Canfranc N330a Pyrennes. You could hear a pin drop.
  16. Other Honda
    Hi Just picked up a pitbike non runner for free Engine was very tight so decided to strip top end off to inspect as bike has been abused badly Barrel make red and piston ruined. Not to fussed as it was for free for my kids to play on and bits are cheap as chips. My problem is the gudgeon...
  17. For Sale / Wanted
    I'm busy gathering the last few bits for the restoration of rd03. I'm in need of the indicator and pilot lamp relays. New prices are just too high! It's the two pin indicator relay and the 4pin (red connector) pilot lamp relay. There is also a 3pin red connector relay but I need the 4pin...
  18. Africa Twin
    Hi fellow motorbike re, I've just had my front fork tube repaired and installed and looking to know how much and what type of fork oil I need for standard bike, some say 648 ml and others say just over 500ml. And 5w or 10w? Also I have fecked up one of my callipers and could not get the screw...
  19. Africa Twin
    hi anybody knows if the front brake pad pins are inter-changeable between the rd04 and rd07?
  20. Transalp
    I've bought their centre stand for the TA700 but it came with no instructions and a quick search here revealed no hints about the general fitting method. So... Do I need to take anything off the bike? A quick look seems to show the side stand in the way. Do I grease the hinge pin during...
Top