Transalp 600 & XRV750 rear lift link SOLD
(Lift handle, silencer sold)
Transalp XL600V 88-94 & XRV750 RD03/4 Extended Rear Shock link for raised ride height.
I removed this lengthened link from a friends 1992 Transalp 600 as it was too tall for him. I now have that Transalp myself as he was...
I have a set of headers that were sold to me as for a 600. they came as a complete exhaust with the standard muffler. But the front pipe is clearly set for a 650. However there is no catalytic converter. Am I right after research that they will be from the very early 650 before 1992?. Please...
I have bought an FMX.
Currently I have more important problems solve with it, but in future I would like to at least upgrade exhaust + carb jet + air filter.
I have done exhaust manual rework for my suzuki gs500 in past. I just cut off old can and welded new straight can onto it. Also...
Bike immaculate,, tank gets damaged but worked fine, full fill ups etc.
Tank gets repaired, cracking job. Bike given back with fuel light on???? Got home, decided to go to garage to fill up--- bike cuts out. Put 3 gallons in, still would not start--no smell of petrol. Dropped...
I have a PD10 TA 600 with the helmholtz resonator but I also have the carb feed pipe off a PD06 without it, which one should I fit?
Is it likely for emissions/economy/performance or to take a tone out of the exhaust note?
Hi, I haven't been around for a while, having sold the transalp to my brother.
He uses it mostly for touring, and so finds the setup of connector pipe and Leo Vince exhaust a bit loud (but it's great fun for hooning around).
I've reinstalled the original HEAVY! silencer box for him and am now...
from the ukgser forum (poster is in the wirral)
My 600 Transalp's been stolen
Just stepped out to go to work and found my 600 Transalp's been stolen.
Orangey/red all over, Laser pipe, E-07 tyres, screen has small cutaway for master cylinder, mirror mount epoxied, Oxford tailbag.
One of my silencers is blowing, actually the pipe work just behind the join to the right-hand can.
So if any of you Dommie choppers/street trackers / customisers is long on a standard silencer or two - talk to me. 2000 RD08
Sent from my iPhone using Tapatalk
just wondering if any one out there has tried put put a twin pipe of a 2013 450 on a 2005 . if so what mods needed , my thinking is that i would need to make a mounting point on the rear subframe for the can and a new panel to clear the can. any help please , and does it give any more power ?
Hey everyone I currently have a 2007 xr250L ,can anyone please help me with the stupid pipe work that comes off the carby ,that carby is so hard to find a pic of anywhere. it has a black plastic male connection coming off the left hand side near top for one of the suction or pressurized...
I was wondering if someone could measure the internal diameter of the tail pipe exit on the dominator exhaust for me please?
I got my domi scrambler running at the weekend but it's ear bleed loud so I want to design a baffle to go in the cans I'm running. From reading other posts...
Not mine but it was posted on Transalp Facebook page - New Price £130, starting bid £50
I've got the same Delkevic can & link pipe on my 650 and it works a treat without a hint of corrosion after a couple of...
My friend and I recently installed new gears in my CRF 250 R 2007. All works great apart from ive now noticed my bike seems to be getting very hot very fast. Literally within 10 seconds of starting it the pipe at the front is scorching hot!
I rode it briefly mainly to test the gears and...
I had a look for another thread to tack this onto but they all seem quite old, so I'll ask on a new thread. My exhaust is leaking from the collector to tail section join. I'm pretty certain it's just the tail section that's rusted out but though I'd ask if the 650 collector outlet pipe has a...
Used but in good condition.
Bought it to replace the one on my bike but now surplus to requirements as I repaired the one on my bike
Looking for £100 which is what it owes me
Cash on collection from Sunbury Surrey or Richmond Surrey.
Will ship to UK for an extra £10
If anyone needs...