Honda XRV Forum banner

pipes

  1. Exhaust Heat Sheild

    Africa Twin
    Hi All Has anybody got a heat shield for AT RD 07, the lower one that fits between the down pipes and the tail pipe, mines a bit battered and not happy with it, paint finish not an issue but must be quite straight and undamaged. Thanks Luke
  2. 650 exhaust front pipes question

    Transalp
    I have a set of headers that were sold to me as for a 600. they came as a complete exhaust with the standard muffler. But the front pipe is clearly set for a 650. However there is no catalytic converter. Am I right after research that they will be from the very early 650 before 1992?. Please...
  3. Wanted: XR650L or XR600R Header Pipes

    For Sale / Wanted
    Hi all, does anyone have a set of header pipes laying around they would like to sell? Please let me know. Sent from my LG-D855 using Tapatalk
  4. Exhausts? Old XL250S

    XL
    Searching for new downpipes for my 79 XL250S and so far found one supplier David silver, are there any other makers of exhausts for these? or what have other people done when they rust through? Thanks for any help.
  5. Blue header pipes after decat

    Transalp
    Hello all, What is you experience after the decat, do you get blue header pipes colors? Did runs the bike not more the 20in without the O2 sensor elinator, could that be the reason? With the lambda/O2 sensor, would the blue coloring stop? Cheers Mike
  6. Advice on 1999 XL600v exhaust removal/replacement

    Transalp
    Hi, Please would somebody give me an advice on changing the exhaust downpipes? I'm always worried I may shear off the lugs that screw into the cylinder heads when I'm undoing the domed nuts holding the flanges. Also, is there a work around to not having the gasket between the downpipe and the...
  7. Exhaust Manifold Flanges

    Bodgers Corner
    I'm working on a project with my VTR Firestorm getting some stainless steel split flanges fabricated in a small run. On the VTR v-twin the front pot gets hit by salty spray and heat and the OEM mild steel flange gradually disintergrates. Not helped that Honda set them as non removeable on the...
  8. For Sale: xr400 oil cooler for sale excellent condition

    For Sale / Wanted
    For sale xr 400 oil cooler i great condition pix available this is just the cooler i do not have the oil feed pipes sensible offers
  9. Wanted: Wanted XL700 Transalp Standard Exhaust

    Bikes For Sale / Wanted
    Hi, I am looking for a standard exhaust / cat for a xl700. I have got the silencer so just looking for the cat and downpipes. Thanks
  10. CRF230 pipe/exhaust on XR200

    XR
    As in the title, do you think one of the performance pipes of an CRF230 would fit the XR200?
  11. 1995 600 size of collector outlet

    Transalp
    (or) I wish I hadn't bothered but it had to be done lol My original standard silencer has some small holes in it so I decided to remove it and patch it up. It was a heck of a job trying to get it loose from the downpipe but it finally came away or so I thought. It had only taken the collector...
  12. Crank shaft freeze plug XRV 650

    Africa Twin
    Good evening, I need to remove the two freeze plugs on the crankshaft to clean the oil pipes between the main journals and the crankpins journals. Diameter of these plug is 11,5mm and height about 5 mm. Does anyone know where I can order this king of plug ? In France, it's by now impossible ...
  13. 2 into 1 exhaust outlet size.

    Dominator / FMX
    Hi wise people, would someone be able to tell me the size of the outlet pipe when going to a 2 into 1 system and how that impacts on performance from the original system. I see 2 into 1 pipe adapter with muffler like GPR advertise but no mention of merged pipe size. Wouldn't going from 2 30mm...
  14. SLR-FX-FMX Frame differences

    Dominator / FMX
    Does anybody know what differences (if any) there are between the SLR/FX and the FMX650 frames? I know the SLR and FX are identical because I've turned an SLR into an FX and vice versa. I'm interested in re-framing and older Vigor into an FMX650 to get a 2007 registration number. I can see the...
  15. Fuel tap

    Africa Twin
    When putting my bike back together I found the fuel tap is leaking when in the off position, I had lost my patience in the excitement of hoping it was going to start, to open up the tap and see what was wrong. So anyway the bike fired up as normal :p but it looks like I have a sticking float...
  16. Fuel overflowing

    Varadero
    Right guys after my first successful post on the forum I am back again in need of help! So I am well versed in carburettors however with all the tubing attached to the Varadero I am a bit bemused. Just started her up this afternoon and fuel began spewing out of one of the overflow pipes which...
  17. XL500S Exhaust flange and collars wanted

    XL
    Hi all, eventually found myself a mint condition original rear exhaust section, problem is that when I tried to mount it on the header pipes the rear section is far too narrow. Can only assume I have a set of 250 header pipes on, have a mint set of 500 header pipes but can't seem to be able to...
  18. Xr 250 exhaust header .

    XR
    . Hi . The header brackets that hold the pipe into the head on my 2002 xr 250 are shot .. corroded .The pipe moves and leaks . Very soon it will fall off . It looks like these are not seperate ltems that one can buy .. so where can I get spares or a replacement . I have seen front pipes for the...
  19. exhaust(ed)?

    Transalp
    I've got a non standard stubby thing of an exhaust on my 600, after taking the heat wrap off I've realised the cause for popping. The can is lightly slipped on with more gaps around joint than pipe... also gaps at header? Where the two down pipes join. also even tho I've now packed the baffless...
  20. Twin exhaust options

    Dominator / FMX
    My rd02 needs some, downpipes not a problem sourced them What twin exhaust have people fitted off the shelf or with slight fabricating ? 88 rd02 Sent from my iPhone using Tapatalk
Top