Honda XRV Forum banner

plastic

  1. Fuel overflow lines - where to connect?

    Africa Twin
    Hi everyone! I recently remove the tank, airbox and carburators to change the main jets after changing to a more open exhaust. Know putting everything back I have a small problem... There is several fuel overflow or drain lines connected together to one main line that dumps excess fuel it...
  2. For Sale: Transalp 600 parts for sale 1991 model. plus 2000 rear rack

    For Sale / Wanted
    Cdi unit Tested on my 600. (carry a spare on your bike) £20. voltage rectifier Tested £15 speedo drive with cable £15 rear foot peg brackets with foot pegs £10 each. Belly pan £10. LH Radiator. No leaks. £15. Cooling fan. working. £15 Fork bottom legs From a 1989 model £15 each. rear rack. £15...
  3. For Sale: Varadero 1000 SD1 Honda Luggage set Panniers Topbox Racks

    For Sale / Wanted
    SOLD £150 A complete set of Honda luggage for 99-02 (carb) Varadero boxes, racks and fittings removed from 99 Varadero XL1000V. The Honda panniers tuck in closer than most aftermarket boxes of the similar capacity and the pannier racks fit closer around the silencers. The topbox has the Honda...
  4. CG125 Tank

    Mechanical Advice
    I have removed my fuel tap off my CG125 tank, and the in the hole where the fuel tap goes, there seems to be a plastic insert (looks like a tube). Can this be removed? Need to get everything removed before i flush out tank.
  5. Hello and XR400 Air Filter Cage / Support Question

    XR
    Hi Everyone, I finally got my first XR400 last week and have clocked up a few miles on and off road already. Loving the bike and have already carried out a number of modifications but I'm struggling to find something. The bike came with a K&N air filter on it, I bought a replacement foam filter...
  6. Rear light relocation program

    Africa Twin
    I really love the looks of the AT, but to me the rear light and plastic protector don't do the bike justice. So I relocated the rear light to sit flush with the fairing and removed the plastic protector (I know, not practical, but hey, stripe of dirt on the back adds to my image...) Original...
  7. For Sale: 3 part luggage set - NONFANGO - For/From Africa Twin XRV750

    For Sale / Wanted
    Here I have a 3 part set of Nonfango hard luggage. It was removed from a 2002 XRV750 but you may know if it will fit other models. There is a 52 litre top box which will take 2 full face helmets and 2 panniers which are a sort of teardrop shape, one end narrower then the other. the top plate...
  8. XR250 front brake callipers

    XR
    Having refurbished my rear brake callipers on my 1996 XR250R, I though the front callipers would be the same ..... BUT alas not. I discovered phenolic pistons in the front callipers ? Am wondering if they’re worth re-using, as i’ve never come across phenolic pistons before and I was...
  9. RD04 choke valve/plunger and running lean

    Africa Twin
    Hello everyone. I have read mostly all threats and post about XRV choke and lean problems and haven't find solution for my running lean problem.. slowly dropping revs and hunting idle... and only air leak that i can find is from choke. I have reamoved choke cable and pushed choke valve/plunger...
  10. Wanted: XRV750 Front Fender (White)

    For Sale / Wanted
    I am in need of a white front fender for my 1993 RD07. If anyone has one in decent condition that they would sell, please contact me. It is one of the last pieces I need for my complete rebuild I am doing. I already have brand new white plastic lower fork leg covers, so I just need the...
  11. stolen crf 450x 2005

    CRF - New Forum!
    Had my crf 450x stolen last night , if you are going to look at any for sale in the future mine had a few one of marks, deep scratch on the frame near the weld on the left side , one off led headlight, home made stand headlight board had been repaired the a blue plastic piece to hold it to the...
  12. 3D Printed choke valve guide for the RD07

    Africa Twin
    Hello and nice to meet you all! I have been experimenting with 3D printing for a while, and I have designed and printed those nasty choke adaptors that always break! I have printed them in a special type of ABS plastic durable to temperatures up to 140 celcius. Have them on the bike for 3 months...
  13. Clutch cable change

    Transalp
    TA 650 (probably applies to all models though) For anyone thinking of doing this..on the 650 its a bit of a job. The Haynes manual says you just "attach the lower end of the new cable to the upper end of the old cable, and just pull the cable through", yeah, right. What it fails to mention...
  14. Hi all just like to introduce myself ,My name is Cy

    I'd like to introduce myself....................
    Hey everyone I currently have a 2007 xr250L ,can anyone please help me with the stupid pipe work that comes off the carby ,that carby is so hard to find a pic of anywhere. it has a black plastic male connection coming off the left hand side near top for one of the suction or pressurized...
  15. Frame blanking plugs

    Africa Twin
    Just a little tip if your looking for a new cap for the swing arm bolt i found these work great. Just had to cut about 6mm off the length for it to fit flush...
  16. Tripmaster -> Garmin conversion Moun

    Africa Twin
    Got my hands on a gratis Garmin Zumo 396LMT-S Motorcycle GPS, so decided to replace the TripMaster (which on mine was still fully functioning!) Anyway, I used my 3D printer to make up a bracket to mount the Garmin on the original tripmaster mounts. I have the 3D models if anyone wants to...
  17. fairing repair - which plastic?

    Bodgers Corner
    My AT's on it's third headlight fairing (or 'nose cowling' as the parts book calls it). The first two developed bad cracks around the holes into which the side fairing panels connect. I've kept the old fairings with an eye to trying to repair them and have now, after many years, got a plastic...
  18. cheap replica handguards

    Africa Twin
    I have been searching for original hanguards but refuse to pay 80 quid plus delivery for two pieces of moulded plastic. Came across these...v....v...cheap actually got them for 1.80 euro, Ill feedback when they arrive
  19. Wanted: Looking for a place who does the "water dip" film process

    For Sale / Wanted
    Greetings! I have a '04TA and I would like to get a "Kevlar" film applied to the plastic "dashboard" piece (Honda calls it a Cowl). Does anyone know of a place that does the "hydrodip" process? I am an American living in Turkey and there just aren't many options or places here for custom work...
  20. RD04 throttle cable problem - help please

    Africa Twin
    Hi All. The throttle on my bike recently became stiff to the point it would stick open. Before this it was working fine and there were no changes to the routing of the cables etc. I took it apart and it all looks ok. I put oil down the lines and they are totally free. I cleaned the carb end...
Top