Honda XRV Forum banner

pumper

  1. For Sale: Fcr pumper carb

    XRV Swap Shop
    FOR Sale FCR Pumper carb 40mm I bought this carb for my new build however after offering it up it became clear it will not fit due to the altered frame loop This carb is rejetted with the correct needle jet(nctv 2nd ring down). These jets and needle jets came to £40 on there own and have never...
  2. dominator carb body

    Dominator / FMX
    need help please. I was adjusting the air screw on my carb today it was stuck solid, so I tried to ease it out bit of wd40 , Disaster struck I broke the threaded insert now carb u/s, tu flu***in spades. So need another body a I have ALL the internals . can you help ? Believe me I have a...
  3. Wanted: Mikuni tm33 carb

    For Sale / Wanted
    Looking for a TM 33 pumper carb for my 2004 XR250 Thanks
  4. WHAT CARB

    XR
    Anybody have a pumper carb on there electric start xr250, if so what carb is it. not happy with the bog on my CV carb.
  5. Pumper carb

    XR
    looking for a pumper carb that will fit on my 2004 xr250l (the one with the starter motor) mine has the mikuni 88 CV carb because of the starter the carb bowl cant be too low. any ideas.
  6. Pumper Carb

    XR
    nearly new Edelbrock carb for Xr250 Check out the for sale section
  7. Pumper carb

    Dominator / FMX
    Hi Anyone ever fitted a pumper carb I intend to fit one as a replacement to the standard on a dom nx650 ? Any help!
  8. XR 400 - Pumper Carb or Stock?

    XR
    I've just bought a 2004 XR 400 from a good mate who has had it from new It's fitted with a Pumper carb - not sure if it's a Mikuni or Edelbrock yet? Is it a good carb mod & will the bike perform better? Only XR 400 I've had before was a new one in 1998 & it seemed to be fine stock Standard...
  9. after market tail pipe or mikuni pumper carb for xr 400

    XR
    Hi all, I would like to improve throttle response on my xr 400 what advice can you give ? thank you very much Adam
  10. xlx350 pumper carb on xr250

    XR
    Ive finally got round to fitting this carb to my 2001 xr280 (with usual gordon mods, a bit of light home port n polishing and a crd end can) I know some of you are interested how i get on with it as you can get em for about £60 compared to £280 for a mikuni tm33 pumper(cripes). Im now...
  11. Adjusting mixture on a mikuni pumper carb

    XR
    Went offroad on my XR400 for the first time this weekend and noticed i had a lot of Black soot around the end of my fmf tail pipe,whicj suggest the mixture is too rich,,can someone tell me how to adjust the mixture on my mikuni pumper carb? Thanks
  12. Edelbrock pumper carb anyone ?

    XR
    Hi, Anyone fitted one to their XR400 ? and if so what do you reckon ? Cheers Andy[/b]
Top