Starting in the 1960s, motocross sport was developing fast, just like O’Neal company founded by former rider Jim O’Neal. He became a pioneer and innovator in riding gear and apparel, and today, the company’s specialists continue implementing smart engineering solutions to make their products...
This is a long shot but I figured I would give it a shot. I have a 1996 transalp in the blue/navy colour combo.
I have badly damaged my front cowl and offside front side panel.
Would anyone happen to have any fairings in this colour combo that they can sell?
If not I will have to suck...
I did a quick search in the forum but didn't find anything similar to my issue.
My 2nd gear rattles quite a lot when I open the throttle throughout all the rev range. The rattle occurs only in 2nd gear and only during aceleration. I'm sure it comes from the gearbox and it's not something...
Hello ladies and gents,
So, right in to it. As the title states my 2000 RD07 J-spec if that matters won't start. Quick clarification, I've hunted through the forum and thought I was on the right track on the parts I changed out. Symptoms: Fired it up this morning warmed up and idled fine, rode...
A quick question: are there any differences in the back-cover (most importantly in mounting points) of the speedoblock depending on the generation, i.e. are they identical and/or swappable? Happened to break the mounting ears on mine of a 1995 RD08 while carelessly tackling a motocross...
Im just about to start wiring my dommie project.
I have created a wiring diagram, and was hoping someone could give it a quick look over and give me feedback on any mistakes.
Also thought it may be handy for other people to use, (if its correct)
Will they physically swap over? Specifically will an rd07 fit an rd04? Mine is getting very tired and a bit bouncy but I am really tight on funds (kidney anyone?) So just trying to expand my options. Tia.
Here I have a 3 part set of Nonfango hard luggage.
It was removed from a 2002 XRV750 but you may know if it will fit other models.
There is a 52 litre top box which will take 2 full face helmets and 2 panniers which are a sort of teardrop shape, one end narrower then the other.
the top plate...
just a quick one; I have an SLR650 with Continental Twinduro TKC 80 multi use tyres.
F - 110/80 19
R - 120/90 17
whats the best pressures? I know the manual says 22/22psi but its too low. Nothing on Continental website specifically to say what pressures although couple of interesting...
Hiya, quick question, tubes in tyres , my front tyre has a inner tube in it , my rear tyre is tubeless, do I need inner tubes or not? also looking for new tyres, anakee 3 seem to be the most talked about, are they the best ???? or go for metzlier /bridgstone . Has anybody used mitchlin pilot...
my 600 TA will roll forwards and allow the sidestand to fold up on the slightest of downhill slopes,
should the stand lock in place somehow?
or do I just have to remember to park her in gear?
I'm on a 2003 650 Transalp. Not owned it long, I've noticed a small hole in the Exhaust down near where the Exhaust fit's onto the big Metal box underneath (is this the CAT)?? After the clamp so the hole is on the muffler part. Anyway's I've got original Stock Honda Muffler on. I'm not...
Just a quick heads up- a friend of mine is selling his XRV650
Name is John 07896 700043
If you look on ebay- its the only one there.
Started off at £999, but I would say its got to be worth between £3300-4000, given the rarity & condition.
p.s in the signature link at the bottom of...
Since Ive had this bike, about 3 1/2 years or so, its never been a quick or good starter or go that well, and have had an increasing problem with stalling at idle
So over the last year or so Ive done quite a few things to try and solve or at least improve things, get it running nicer etc
My brake light isn't working with the front brake. I was hoping a quick clean of the connections at the switch would fix it, but no joy. What else is it that might be the problem. I read one thread where a guy had a broken wire. I'm hoping that isn't what's wrong with mine. Brake light works...
Hi All, I'm doing a quick trip to Brisbane to pick up a doner Trans Alp and need to pull front end and swing arm / rear wheel off to fit on a pallet for shipping to Darwin. I will be cutting the frame to fit it on as the frame is bent and i have a spare. Just after some info on what tools i may...