A quick question: are there any differences in the back-cover (most importantly in mounting points) of the speedoblock depending on the generation, i.e. are they identical and/or swappable? Happened to break the mounting ears on mine of a 1995 RD08 while carelessly tackling a motocross...
My nx650 RD02 (1989) is in need of a new shock. The current shock is an old Hagon that is at least 20 years old fitted by the previous owner and I doubt very much it is serviceable by the look of it.
Im on a tight budget (meaning I don’t want to spend a fortune) but need to replace it...
Hi, I'm in the process of rebuilding both front and rear wheels on my 1998 RD08, problem is I've only got the 88-89 manual.
According to this manual the front wheel offset is given as 22.25mm from the disk to the rim, this is probably ok for my '98 as nothing much changed from the RD02 model on...
Does anyone know the standard spring rate for the rear shock?
Or has anyone fitted an aftermarket shock and know what the spring rate is for their set-up?
Sent from my LG-D855 using Tapatalk
My XRV650 RD03 needs its wheels replaced. It seems it was stored outside on grass for about 17 years.
I have managed to get a Transalp 21" front in good condition and a ST1000 Pan European front left hand brake disk.
Would a Dominator rear wheel fit?
Good Dominator rear wheels are cheaper and...
Has any one got a pilot jet for a carb fitted to a RD02 to hand, or happen to know the length?
Just stripping the carb and the current pilot jet that was fitted is 24mm in long, however the refurb kit for the carb came with one that was 28mm long. Any clues on which one is correct? The 24mm...
transalp 650cc low seat & suspension lowering kit
I have a low seat and a suspension lowering kit for sale.I bought them for a 2001 650cc I bought the items and fitted them but still had problems with sitting on the bike due to a dodgy hip.The seat has a couple of small tears in the cover but...
I just looking for Oil Temperature Gauge for my '93 RD02. I found lot of them at ebay around 30 EUR for rd08, and 65 eur for rd02.
As far as I know, the thread size is different: RD02 has around 29mm, and RD08 has 20x2.5mm.
But, the rest of the stick is same?
If this is true, I...
I need to replace the large O-ring that sits between the carb boot and the head on my RD02.
Does anyone know where I can find one as most of them are in the States or cost £10-£15 to post an O-ring that costs about £5...:(
If anyone has a spare they would be prepared to sell, that would be...
I was wanting to fit the Acerbis 23lt fuel tank to my RD08 but am advised it only fits the RD02.
Does anyone know whether it can fit with a little bodgery before I lash and just try it?
There will be the mounting of the tank itself and then the front fairing fit.
Any assist greatly...
HI Guys a noob here and apologies if I'm repeating any suspension threads.
A friend and myself are entered it the 2018 Budapest to Bamako Rally 2018 and we are using 2 Dommies an RD02 and an RD08. We both have endure machines, mine a 350 Husaberg with WP suspension and him a CRF 450X.
Having built this bike for my son a few years ago when I got sick and thought I was on borrowed time I was wondering how much it would be worth..
Chain and Sprockets.
Shock linkage bearings.
Leo Vince stainless...
Hi,Honda NX650 1994 RD02 here,
I was about to change front brake pads and while taking old ones out those two tabs' fall off from piston tops
I put one back in place here ^ just to show you where it was.The thing is, that those tabs don't stay in place any more, it falls down if I put brake...
Since i'm pretty new to the Forum, i want to present myself and share a picture of my dommie.
Maybe this post would help as an initiative for all to share picture of your bikes :toothy10:
I'm Juan Carlos Originally from Venezuela (LATAM) i'm currently living in Ireland and...
As above, somebody asked me if they will go... I said yes. But, a quick search reveals the wheel offset is different.. But that shouldn't affect the forks... Are there any other differences? Calliper mount maybe?