rear brake

How is the rear brake pedal in 650 removed? Do I just slacken the bolt at number 13 and pull the lever off?

I can not seem to find out where the rear stop switch spring attaches to the rear brake lever. Can anyone enlighten me with words, pictures or video?!! Many thanks in advance

I am doing a lot of off-road with my Africa (RD07) and in standing position i can't reach the rear brake pedal. So i am looking for a foot brake lever extension. Any suggestions? Do you think this do? https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192622018951

I am looking for a rear brake calliper for a 1996 model. If anyone can help. Thanks Ian

anyone have any idea on how to improve the stopping power on the rear brake ???

Good morning all, does anyone know the fix for a rear brake light coming on and staying on when I turn my lights on my 1999 xl 600 transalp,

Hi Guys I am looking for rear brake cable for honda XL250s 1981 . where i can buy it online. preferably from UK Regards

Hi guys, After fitting some lower pegs i feel the need to some how lower the rear brake pedal. Any ideas ?? Cheers Bob

How do I fit the new brake pads in rear caliper what do they book on to. Has anyone got photos or can guide my through it

Hi Is there a way to check or to find the fault if the front break lever switch is faulty? My break light works with the rear brake but not the front one. Regards

Can anyone help me with this simple task? How do I take up the free play on the rear brake of a 2005 650 Transalp ? .:thumbup::thumb: :thumbup::thumb: :thumbup::thumb:

Wounder if anyone has done this? Parts easy to find (used) Just curius if a first gen TA is worth to buy and upgrade... got a adventure bike fever but a low buget.

Hello gents, Rebuilding the rear brake on my RD03 and noticed that I am missing two parts from the schematic. The thing is, I'm not sure if these parts are absolutely needed. They are parts number 10 and 11: They snap to the back of the brake pads. I always assumed that they were there to...

Suggestions please. There are two bolts on the rear brake, one with a nut and the other with an Allen Key. It is the second bolt that has seized. Whoever fitted it seems to have copper slipped the part that doesn't touch anything but not the thread (the reason fro undoing it is they did not...

Genuine honda clutch plates. Bought, never fitted. Turned out it was a dodgy clutch cable. How embarrassing. £50 posted Graves crash bars. Have been crashed on and bent and scraped away. A few months ago I stripped them, used some jenolite, painted them with 3 coats of white hammerite by hand...

ABS Twin-spark Registered January 2003 Taxed June 2014 MoT Dec 2013 Just fitted: Brand new rear tyre. Both throttle cables. Rear brake pads Fuel pump Good all-round condition. 57,000+ miles with some service history, MoT's and receipts. Not a pampered bike, but seems to have been well looked...

Hi all. Not been an here or out riding for quite a while now due to kids and work, Anyway I took my xr4 for its mot a few weeks ago and it failed on a slack chain and a loose bolt holding the rear brake lever. I did the things needed to get it through mot but ever since I tightened the chain up...

Hey All, I have been searching a while for any clue how to turn these systems off but could not get any info. I stripped the bike and found the ABS and brake link system blocks but could not find any sensors controlling them, to just electricaly turn them off. Is there any way to cut these...

Hi Folks A bit of advice sought and at the same time provide some feedback on a new farkle. I recently purchased the following SW Motech footpegs for my TA. they are, in usual German fashion, well made and fit perfectly, taking a few minutes to fit. They have 2 height settings - original and...

wanting a rear brake caliper bracket/carrier​ for xrv 750. rd04/07/07a. cheers