Honda XRV Forum banner
rear hub
1-20 of 45 Results
  1. For Sale / Wanted
    I'm looking for a rear hub or wheel for an XR250R ME08 1996-2004. It will need to be shipped to Taiwan. Sadly I'm not aware which other XR hubs might be compatible with this model. Thanks and cheers, Chris
  2. Africa Twin
    First big problem on my rd03 restoration the casting on the hub broke away when removing the very stuck bolts. I was going to rebuild the wheels anyway. So I need A hub Or wheel Or transalp 600 hub Or wheel Or dose any one know of any other wheels fit. Sent from my SM-G955F using Tapatalk
  3. Transalp
    I am rebuilding my 1987 TA and having taken loads of pictures as I was dismantling it, I seem to have missed this one. When fitting the sprocket carrier hub it doesnt appear to go all the way in. It feels as though it has gone as far as it can but would appreciate if someone could let me know
  4. Africa Twin
    Hi all, Anyone know of anywhere that makes a replacement rear hub for the AT or any other brands/models that share the same axle diameter and similar spacing? Any help appreciated. Cheers Slidey
  5. For Sale / Wanted
    In need of a rear hub - or at a push a complete wheel for an RD07/RD07A Africa Twin. Have a look in the garage, under the stairs, and at the back of your sock drawer please :D:D:D Either drop me a PM or email me direct at jonathan(at) Thankyou in advance (hopefully)
  6. For Sale / Wanted
    Hi Guys, any chance to find one in good conditions? Thanks All
  7. For Sale / Wanted
    Just the hub as want to get a set of new wheels made up Look forward to hearing from anybody John
  8. Varadero
    I cannot locate my fiche list with the part number for the 2004 Vara rear hub, rubber cush drive. Can anyone assist please as I need to get a set ordered PDQ!! :(
  9. For Sale / Wanted
    All sorted now, Thank you Foz Anyone got a rear hub for sale for an @ from 1997? I'd like to powder coat it and then have it built into a gold Excel rim so that it matches my front wheel* that has had had the same treatment, cosmetic condition isn't important and neither is the condition of...
  10. Africa Twin
    Hi guys, just come back from the MOT and.... again the rear wheel bearings need to be changed... the hub race is too loose and is literally eating the bearings out once they are fiitted...:( they do not last more than 1000miles.. any suggestion before looking for a new hub? planning a trip to...
  11. For Sale / Wanted
    ALL ITEMS NOW ON HOLD FOR MEMBER HERE SO WILL CLOSE THIS ONCE DEAL DONE. Ok so if i can sell in 1 go i will. but only if enough interest I am trying get cash to do work on the bike and upgrade it to rally spec. So i will have following Front fairing and nose front headlights with guard...
  12. For Sale / Wanted
    has anyone got a rear wheel or head light switch for an 02 rd 07. My headlights are permenantly on full beam and cannot get it to release.
  13. For Sale / Wanted
    I am selling the following that have come off Rd07's I have owned in the past-I do believe that the cycle parts will fit 07a also. 1.Complete rear hub including bearings,cush drives,sprocket and disc with 4.7mm remaining.All in good order EXCEPT the rim which is knackered. £75 +post. 2.Good o.e...
  14. Wheels, Tyres & Tubes
    Quick question to the wheel gods..... would an RD04 Rear Hub fit onto and RD07A?? I have the opportunity to purchase an RD04 Rear Hub (very good price) and am unsure if it will fit ok onto and RD07A??:confused:
  15. For Sale / Wanted
    As some of you are aware from my other post and my discovery of a buggered bearing seat, i am now after a rear hub for an Africa Twin RDO7A (2000 reg) of course i will pay for it as well as any postage to get it to me in kent, no rim or spokes needed just the hub. Please have a rummage in your...
  16. Africa Twin
    Hi folks, I really need your help on this on..... bit unusual.... smashed bearing area of the hub (see pic) In the process of changing my rear wheel bearings on my pride and joy RD07A (2000 reg) as they were majorly buggered, when the sprocket side bearing plopped out so did half of the...
  17. Transalp
    Hi guys, bit of a dilemma, the rear hub brake lining on my '89 TA is worn and the brake pedal is now pulsing when it's applied. Been trying to source a rear drum but even if I could get one it's over 300 quid. Does anyone know if I could get the drum re-lined, I know they can do shoes and pads...
  18. Bikes For Sale / Wanted
    Rear drum brake hub for my 1990 TA. The lining in mine is badly worn.
  19. XR
    Hi all Needing a replacement rear wheel hub for my xr 600 but cant find a decent one second hand. Will any of the other xr's hubs fit it?
  20. XRV Swap Shop
    hub no longer available.....
1-20 of 45 Results