Honda XRV Forum banner

rebuild

  1. Africa Twin XRV 650 RD03 1988 Re-build restoration

    Africa Twin
    Hello guys, I am Nikola from Bosnia and I am in the process of restoring old AT 650 and the job is nearly done so I've decided to share this with one of the biggest Africa Twin cummunities. For now I will share with you link to a Serbian moto-forum,BJBIKERS, where I post everything I do on my...
  2. 600 rebuild story

    Transalp
    interesting thread: https://advrider.com/f/threads/rebuild-honda-transalp-600-98.1358675/
  3. Wanted: XL600 WaterPump 1995 Model

    For Sale / Wanted
    HI, Does anyone have or no where I can find a waterpump for my rebuild. Any help much appreciated
  4. Oil Pressure and clutch Question

    Transalp
    I’m on changing the output shaft on my 700 XL and having started it up after the rebuild I am getting a very light noise from the clutch side, my question is there anything that is peculiar to the clutch to make it noisy. When I pull in the clutch lever the noise disappears. , there is also a...
  5. Removing brake caliper pistons with a bicycle pump......A BODGE

    Africa Twin
    Yesterday I started on the brake re-build for my RD03. This bike had been sitting for a few years with the brake systems drained and partially disassembled. Problem: How to remove the old crusty brake pistons from the caliper while not destroying them in case they can be cleaned up and...
  6. Wheel issues and Parts for the xl650v series?

    Transalp
    Hello all! I'm the proud yet frustrated owner of a Transalp xl650v6 which I brought new in August 2007. Ever since then I've had a love hate relationship with the bike especially when it comes to maintenance and repairs. Firstly let me admit that I am a sinner! Hailing originally from New...
  7. 520 chain and sprockets on XRV750 RD07a

    I'd like to introduce myself....................
    Hi everybody, I am new to this forum. Just bought an XRV750rd07a full stock that I am planning to rebuild to a lighter and more offroad capable travel bike. One of the ideas is to install Supersprox sprocket and 520 pitch chain to reduce weight. Anyone any advice or experience having done this.
  8. New carbs - Options

    Dominator / FMX
    Hi All, I've tried searching but haven't managed to find a definitive answer. Is there a direct replacement carb that would fit a 1999 nx650? I was going to strip and rebuild mine as it's got the usual tickover issue but if there is a better replacement that could be used I may well just go...
  9. Wanted: Wanted - RD04 nuts, bolts, rear wheel spacers, carb to airbox rubbers.

    For Sale / Wanted
    During our move a box has been misplaced :( Now I have time, space and money to start this rebuild. A lot of xrv rd04 have been broken for parts but no one seams to keep the little things ! Pricing these small items new, very expensive. Thank you. Safe Riding.
  10. Rear shock RD04: Rebuild or cheap aftermarket?

    Africa Twin
    The rear shock on my RD04 is really harsh at holes and bumps, and it goes thru the whole bike. Its feels like the compression damping is too hard. I have tried to adjust it, but I can’t feel any difference. I have 30 mm free sag, and 70 mm rider sag, so the spring should be ok. (from the...
  11. Wanted: XRV750 Front Fender (White)

    For Sale / Wanted
    I am in need of a white front fender for my 1993 RD07. If anyone has one in decent condition that they would sell, please contact me. It is one of the last pieces I need for my complete rebuild I am doing. I already have brand new white plastic lower fork leg covers, so I just need the...
  12. Need some new calipers or refurb

    Africa Twin
    Hi all! Been a while since i last posted.. moved house, got a car, started a family etc, so the rebuild of the RD07A was put on hold... until now :) I am in need of either... some new (second hand) brake calipers (front and back) or info on where i can send my ones for a full refurb etc...
  13. 1998 RD07A rebuild

    Africa Twin
    Hi all, Started the rebuild process last week at last! Thought I would start a tread about it as I do like to read a good rebuild post and happy to receive any suggestions that go along with it. Happy with my progress so far but I think this is going to take a long time before it's back on the...
  14. Non-running RD04 in Sussex

    What's it worth?
    Hello people. Long time no see, etc. Not been around here in yonks due to, well, life and things like that. You know how it is. Anyway, I finally got to the point where I have admitted I am never going to live anywhere with a garage where I can rebuild my old RD04, so I think the time has...
  15. Engine rebuild / change piston rings on XRV RD07

    Africa Twin
    Hi fellow AT owners, sorry for the long post. My rear cylinders compression has gone down to less than 100 psi (front still ~130), and its leaking oil from head gasket and the bike is burning a considerable amount of oil. It has now gone more than 140.000 km. Still running ok, but doesnt have...
  16. Transalp Rebuild.. What to replace?

    Transalp
    Hi All, Yesterday I stripped my bike down to give it a freshen up, below is a list of jobs i'm planning to do, is there anything obvious i've missed? I'm hoping to have the bike back together and running in 3 weeks time for MMM at Haggs bank. I'm going to prioritise the engine as that's the...
  17. Recovered alp rebuild project

    Transalp
    Following the theft and subsequent recovery last March of my old transalp 600 (in pieces). I'm now gearing up for a project. I have most big parts from my alp here with a frame from a bike a friend broke for spares. As this will never be/feel like the same bike it was, I'm planning a few...
  18. For Sale: Transalp XL600V

    Bikes For Sale / Wanted
    Finally getting around to selling this. I bought it to use as a run around whilst I do a rebuild (of another 600!), but have found that I'm just not getting on with the project so this has to go to a) make space and b)motivate me to crack on with the rebuild! I had it a little over 2 years and...
  19. Wanted: swap 19"slr for 21" NX wheel and brake. and slr nx carb needed

    For Sale / Wanted
    got an SLR 650 with no carb any condition considered as i will clean and rebuild. also looking to put a 21" wheel and brake in it swap for the current 19" set up ?? cheers Ewen. located in London .
  20. XR250RJ 1988 shock rebuild?

    XR
    Has anyone rebuilt the rear shock on the '88? There doesn't appear to be a rebuild 'kit' out there? Anyone done it? Thanks in advance.
Top