rebuilt

I have rebuilt my dominator and some how now its all back together have lost the VALVE SET, STARTER Part # 16046-MY6-770 and cant find one for sale that not mad money anywhere, any help or if anyone has one it would be very much appreciated . cheers Ewen .

i have rebuilt my dominator and some how now its all back together have lost the choke slide plunger and cant find one for sale anywhere any help or if anyone has one it would be very much appreciated . cheers Ewen .

Has anyone rebuilt the rear shock on the '88? There doesn't appear to be a rebuild 'kit' out there? Anyone done it? Thanks in advance.

Has anyone rebuilt a dominator oil pump? I have 2 pumps neither one works. Is it a worthwhile to buy the new inserts? I have been looking for a replacement oil pump but after wasting more money On a second hand pump, I think either a new pump or new inserts is the way to go Your advise on this...

On the off chance, does anyone have a list of bearings required to rebuild a 2000 nx650 (not engine internals). Wheels, Swing Arm, Linkage etc As a lot of people have rebuilt theirs, thought they may have a list lying around with this info on.

Hi ,I have rebuilt my Honda xlr125 after it had been stood 6 years , everything electrical works but I have no spark at the plug,I have checked the obvious things but still no spark any ideas. Regards Spunkdaddy

Hi guys my 1st post hope it is in the right place.I have recently acquired a 1974 xl250 motor sport without a engine.I would like to rebuild it as original but having real trouble sourcing a suitable engine.I know its a longshot but does anyone know of or have one for sale? I do hope someone can...

Dutch dirtbike wannebee Alp - lots of pics thread Hi there, my name is Edwin, living in a small village called Schijndel which is in the Netherlands. In my younger years I was a semi fanatic dirtbiker and I was thinking catching up this a little bit. Not as dirtbiker only, but more semi so...

Hi All Just rebuilt my Honda XL500s 1979 which I've had from new, first time back on the road since 1990 The problem I have is a noise from the spedo head, at first I though it was the drive then cable but with cable disconnected from the head unit the noise has gone, so I'm presuming it must...

Hi there, anyone out there rebuilt the rear swing arm bearings and the pivot bearings on their Transalp. I've got a 1999 version and it's just failed the MOT on the pivot bearings. I thought I might as well change all the bearings at the back and give it some paint. Any one know of a company...

Hola! mY '04 TA backfires and pops when I let off the throttle. Just just started. This winter I rebuilt the vacuum actuated fuel valve and I installed a Scotoiler for the rear chain. Both of these pull vacuum from the nipple on the rear cylinder inlet. The bike never backfired before I...

Has anyone rebuilt a starter motor? The ebay item below will fit but has anybody used one? Or does anybody know of an alternative source of parts? Starter Kit Fits Honda Motorcycle NX650 XR650L NX XR 650 644 | eBay

so i was reading practical sportsbikes the other day, they recommend and in fact did a feature on replacing existing 1990's coils with modern stick ones, with all the benefits of newer tech. has anyone considered this with an @twin? im already running a programmable ignitech CDI along with...

Anyone have an old one ? Can't afford a new one at present. A worn out one that can be rebuilt is fine. Thanks.

Need help, please! Hello I have just had my 650 TA engine fully rebuilt, I put the bike back together over this weekend checking everything along the way with help from Haynes. The bike is just refusing to start, the engine turns over without any issues, fuel is getting to the carbs but for...

my 95 nsx has a poor rear wheel.....can it be rebuilt ...new rim ect....or are they now no longer available....my local bike shop says new rims are not available and looking like i will have to break the bit for parts......

The carbs are now out of the carbs. They will be degreased, cleaned up, covers will be zinc plated, and carbs will be rebuilt. I popped the covers and found the rubber diaphragms to be ain good shape. No tear or crack. Nonetheless, I wonder what's the purpose of the pistons and diaphragm. What...

I am on the look out for the next rebuilt project, need to put some of this new found knowledge to use;). Preferably RD07A. Cosmetic damage, accident damaged, right off, engine problems anything considered. If anyone hears about anything languishing unloved that needs saving from the breakers...

I have a complete bike here in Ireland,bodywork is not great. Bike was bought in boxes and I've sunce resprayed the frame and rebuilt the engine with a new output shaft. Will consider selling complete if I get what I have into it

Hello all, I'm buying some Excels for the RD03 and having them shipped to Woody's Wheel Works to have them laced and the hubs drilled to accept some thicker spokes. I, rather stupidly, decided to separate the hubs from the old rims before taking note of the offsets. I've talked to Woody's who...