Honda XRV Forum banner

received

  1. For Sale / Wanted
    Due to demand I have put into production a new batch of riser kits comprising of from fork extensions with valves and rear U bracket. I have received several requests through Facebook etc and am having 10 sets produced. There are at least 5 sets available so if anyone interested to reserve a set...
  2. XL Technical Specs
    Having trouble with a weak spark on my Honda XL250R. We think the source coil is at fault but on test it gives 76 Ohms resistance. The correct resistance is unclear as the manual we have says reading should be in the range 200 to 500 Ohms. However later it says that for post 1981 the reading the...
  3. Africa Twin
    So how do you go about choosing a proper size fuse? I received my new 3 circuit setup and would like to get it installed now. One line is going to my gps and another to the rear trunk. is there a rule of thumb to use for figuring things out? Also for the switched circuits can I use a rear turn...
  4. Dominator / FMX
    Come with 1 Year Warranty 100% Guaranteed Lowest Price Free Local shipping 110% Guaranteed Money back in 5 days International shipment cost $200 Worldwide deliver in 7-10 days Guaranteed We ship same day, As soon as we received the payment Pickup is 100% Permitted Email info (at)...
  5. Africa Twin
    I have finally received my new starbars ready for fitting at the weekend. Question I have is this....the original bars have holes for the instruments, do I drill new ones or remove the bits that slot into the holes on the instruments? cheers in advance
  6. Dominator / FMX
    Set to with the debaffle today. Cut the end off the two baffles so I could get 38mm hole saw in. Cut the baffle out and then welded a 42mm piece of pipe onto the hole so it looks a bit tidier. Gave it all a blast with some black vht paint and she sounds like a good un. Just got to swap the main...
  7. Africa Twin
    Hi all, i am new to this site and need some of your collective wisdom. i am rebuilding my RD07A and have come across unusual wear on the inside of the crank cases that looks like the crank rubbing against them. I cannot find any thrust washers or any method of adjusting crank lateral movement. i...
  8. Africa Twin
    I just received my new tires and figure I will change tubes as well and keep old ones as spares. Everything I have owned for years has been tubeless except my RD03 which came with new tires/wheels and my KLR650 which I changed eons ago. Want Heavy duty but not sure which brands are best. Any...
  9. Africa Twin
    Dear XRV Community, My RD07A's anniversary was actually an excuse to return to Morocco. I've always received kind and useful feedback from this forum, herewith sharing a few photos: More can be found here: https://www.flickr.com/photos/[email protected]/albums Happy and safe travels!
  10. Transalp
    Hello! I'm off to Africa in a few days to ride an XL700 for a while and I don't have one at home, I was wondering if you could recommend the most commonly needed tools and sizes for the bike? I'd love to arrive ready to change a tyre, tighten a chain etc. Any help gratefully received! Thanks :p
  11. Dominator / FMX
    Hi again On the left side of the carb on my Dommie there is a plastic bottle type container which I assume is part of the crank case breather. Certainly in the diagrams I have found, that appears to be what it is. Can I remove it and replace it with a bit of tube that does away with the bottle...
  12. Dominator / FMX
    Hi Guys, I am in the process of cutting out the bottom of a fuel tank to fit over the top rail of my NX650.. as you do :) Once I have fabricated the new pieces, it will require stitching / welding.. I can mig, tig, arc, to a suitable standard but I feel mig or tig will give me to much...
  13. For Sale / Wanted
    As the title says, rear axle spacers required for 1997 Africa twin, l have the wheel and axle but no spacers, I'm upgrading my transalp Any advice gratefully received, thanks. Jasper
  14. Dominator / FMX
    I saw this youtube video and I would like to know if any of you have tried them and where to get them? They seem to be called "Marmitte carbonio senza db killer" and could be Italian. Any info gratefully received. Thanks as ever...
  15. Insurance
    I have received a pretty competitive quote for my 2 Honda's from Bikesure aka Adrian Flux, including Euro breakdown cover. Any comments or experiences on the quality and level of cover offered by this Breakdown add-on please?? Carole Nash breakdown was 100% when I killed a front wheel "near"...
  16. Chatter
    Hi All, just wanted to say merry xmas to all on here - and I wanted to say Thank You for the advice which I have received throughout this year. Advice, given freely and with an honest spirit is something valuable and not to be taken lightly. Thank you to all! Reuben
  17. Africa Twin
    I know this is also in the original thread but I need an answer asap as I want to get my bike back on the road asap. I have received a second hand speedo drive and need to know if the washers are already in there or if I need to order some. I can see something at the bottom of the drive bit...
  18. XL
    I have a 1984 xl125rf with a leaking fuel tank! Will a 1980 xl125 s have the same tank, or will it be compatible? Any tips gratefully received!
  19. Africa Twin
    I bought a full wheel bearing kit off eBay and I have received five bearings, three of one size and two other that are both different sizes from each other. Sizes I got are: 3x 6203-2rs c3. PFI bearings 1x 6303-2rs c3. PFI bearings 1x 6204DDU nsk bearings Can anyone tell me the required...
  20. Transalp
    Hi, does anyone have these fitted to their Alp xl700 08>? Am looking for advice on fitting before i make a purchase, specifically how and where they attach to the bike. It looks like they fit on the frame at the front somewhere. Any help would be greatly received.
Top