I've recently discovered a rattle from the clutch cover on my 93 rd07. It happens when the clutch is pulled in. I'm thinking that it's the release bearing, wondering if anyone had any other ideas?
Sent from my SM-G960F using Tapatalk
Hi all, New to the forum so go easy on me... Just after some advice. I'm attempting to put some oil on my throttle cables but the cables are super tight and I'm struggling to release them. What am i missing? I have a 700. Cheers
i have taken off my front wheel from my africa twin to get it balanced and new discs on the front but really hard to get callipers back on.
i will change brake pads aswell but never did it before so any advice would be appreciated.
is there anything other than wd40 to help widen...
I finally found a rack to mount my ammo boxes onto my Dommie, does anyone have pictures of quick release mounting device so I can get my bike ready for my first trip abroad this year?:thumbup:
I recall seeing something about using hockey pucks somewhere in here.
Looking at the new 2013 Acerbis International catalog I saw where the 23l tank shows to be listed now for all the Dominator years. I've tried to contact Acerbis a few times by email with no response. I've also had no luck contacting a couple of Acerbis dealers in Europe. Does anyone know of an...
After my TA 600 has warmed up the throttle wont always drop back to tick over revs the only way is to manually push the spring back down. So how easy is it to remove the spring and give it a good clean to see if it stops it sticking since apparently the part is no longer available?
Apparently, Metzeler are to release the new Karoo 3 in March.
Some words -
A new concept of Adventure and Enduro On/Off tyres dedicated to off-road expeditions, featuring both off-road traction and on-road stability with an excellent mileage.
- Improved Off-Road traction and handling
Now its probably me just being anal and not knowing these bikes, but do the gearboxes chatter when idling. It goes away when I engage gear, so its either the gearbox or cluch? What are the release bearings like on these?
When one of the biggest news items is the release of a super hero, Batman, it is nice to see that heroes are not just fantasy :thumbup:
BBC News - Senior citizen shoots at Florida internet cafe robbers
Could air bags save motorcyclists from serious injury?
Airbag technology has a proven safety record in cars. Now, a pack developed for horse riders could potentially see a new marketplace amongst motorcycle riders. The Point Two jacket, developed by the Transport Research Laboratory, contains...
Motorcycle safety and emission performance: European Commission proposes substantial improvements
The European Commission has proposed the mandatory fitting of advanced braking systems on new motorcycles and automatic headlamp-on switching for all L-category vehicles. This category covers a...
MAG PRESS RELEASE
The European Commission has launched an internet consultation to gauge reaction to the idea of a standardised EU MOT which might be far more demanding than the British one.
They are also considering increasing the frequency of inspections and a requirement to...
Can't get the last bolt out to release the exhaust. I am in the process of changing them for stainless steel bolts.
The 12mm ring spanner I used worked fine with the other 3 but slipped on the last one so i used a needle file to file it down to 11mm (This was easy due to corrosion). The 11mm...