Search Results for ‘repair’

Hello AT lovers. I am from İstanbul / Turkey 7 years ago, i sold my XRV when i was divorced. In one week missed my bike and i felt so sorry but it was top late to get it back. Here is the short story of restoration. I bought the bike in boxes ☺ It took 5 months to restorate. Don't sell your XRV !

Hi ive bought a 97 XR400R but upon inspection its got a broken valve which in turn has damaged the head too much for repair so im looking for a head preferably with valves/cam etc im in UK? Thanks in advance.

My carbs are worn past the point of repair and the only option seems to be some secondhand carbs; have seen them on eBay Germany in the past but not for a while. Haven't posted here for years but thought it might be worth a try. Anyone got some RD03 carbs lurking in the back of the shed? Cheers

A One-Stop-Shop for Gear, Parts & Accessories – MOTORCYCLEiD – New Vendor on the Site Welcome to the MOTORCYCLEiD section of the forum! Our team represents one of the largest online stores in the country that can become your one-stop-shop for all the needed motorcycle parts and accessories...

I'm currently wearing a Shoei Neotec Mk1. The visor leaks a fair bit when it rains. The Pinlock insert seems to shrink and fit poorly, therefore it mists up. The leaking visor causes the misting to accelerate. I contacted Pinlock and they sent me a new insert. It also shrunk over time and now...

Hello folks I'm hoping you can help me pinpoint the cause of a peculiar looking issue with the 700. A bit of background; I've had the bike for a couple of years and recently had the engine rebuilt by a Honda dealer to repair a stripped output shaft. The splines the sprocket mounts onto had...

Hi All Can anyone advise how i can go about repairing an RD04 fuel level sensor as per the type in the image. Is there a link available to buy the correct thermistor? I have seen the repair videos but seems this type is different?

https://i1367.photobucket.com/albums/r784/adamnightingale/DT200R%20Restoration/Capture_zps1u7mvupa.jpg Hi All I am trying to get a severely corroded RD04 running, The carbs have completely seized and it appears to be due to external corrosion. Is there a good resource available to understand...

Im getting a wheel respoked for my @ and want to use the best rim tape so I have looked on ebay and it looks very thin. I have some used pieces of rubber membrane I used to waterproof a roof and it was way more expensive than I thought and very good quality. Will this be better to use than £1.99...

Looking for a cheap project/spares repair type bike. Engine not important but the more complete it is the better.

hi my friends does anyone knows the size of the clutch basket springs because it is noisy and I want to repair it. Thank you

Red/White/Blue, 60,200 miles,mot until March 2019,standard plus sensible extras,tall dark screen(& standard),crash bars,headlight protectors,centre stand,heated grips,top box,recent new Michelin anakee tyres.Seat has had temp split repair & computer Perspex screen has sun damage...

Hi I'm on a 2003 650 Transalp. Not owned it long, I've noticed a small hole in the Exhaust down near where the Exhaust fit's onto the big Metal box underneath (is this the CAT)?? After the clamp so the hole is on the muffler part. Anyway's I've got original Stock Honda Muffler on. I'm not...

My AT's on it's third headlight fairing (or 'nose cowling' as the parts book calls it). The first two developed bad cracks around the holes into which the side fairing panels connect. I've kept the old fairings with an eye to trying to repair them and have now, after many years, got a plastic...

Hi all,I have a xlr250 baja md22. '92. As far as I know, it's quite close to xr250r, so I asking here.I don't like the auto decomp., so cable cutted. The bike stored for a year. With the usual (to me at least ;) start procedure, I push slowly the kick starter, find a compression, release and...

Clutch rattle is excessive it does quieten when i pull in lever but its excessive and i need to sort it !Now i am still not ready to pull it apart so i still dont know whether its just worn plates or more serious ..I was looking on you tube and i found a guy called [email protected] who can...

Was hoping someone could help with a braking issue (front) on my 1991 AT RD04. I've rebuilt the calipers and fitted the master cylinder repair kit, bled the brakes and fitted new pads but there's absolutely no build up of pressure at the brake lever. A couple of times I've managed a very slight...

I think I know the answer :(

Hi I have recently bought a very cheap 1989 RD03. It had been stolen, and was written of by the insurance company. The thieves have painted it flat black, and broken some parts. Luckily the black paint comes of quite easily, without damaging the original paint or decals, but I'm having...

Hi all, On one of my parts hoarding trips I acquired an RD07 frame. Never needed a frame, but can't resist hoarding XRV parts. It needs blasted and powder-coated, but it seems in a pretty good overall shape. It came from a barn full of bike bits collected over years by a fellow parts hoarder...