Just arrived here,
well I need a some suggestion regarding rider jackets for Halloween,
I saw some pretty good jackets on Halloween Coupon code 2019, and I pick out 2 jackets pic shown below.
Can you guys help me to pick one in these jackets,
Which one is best or suitable for Halloween?
Honda 1972 SL350K2 £2400
The SL350K2 is the last of the Honda 350 twin dirt bikes with no electric starter, pressed aluminium mudguards, 21” front wheel, 18” rear wheel
Honda 1972 SL350K2 speedo 7643 miles, free tax & MOT, last expired May 2019, UK reg May 2018.
I’m pretty sure all the above use the same basic frame, so the dimensions i’m after should be the same.
Could someone with a Swing-Arm from one of these measure the front pivot width. That would be the outer width, i.e. the width required in the frame and also the inside width, i.e. the width...
I've been riding my trusty Transalp daily now for 12 months. It was time for a new Chain and Sprocket set. I removed everything that was required and gave it all a good clean. Fitted both Sprockets then re-assembled with the new chain. Had some problems with riveting the master link as...
Hi fellow AT owners, sorry for the long post.
My rear cylinders compression has gone down to less than 100 psi (front still ~130), and its leaking oil from head gasket and the bike is burning a considerable amount of oil. It has now gone more than 140.000 km. Still running ok, but doesnt have...
Yesterday I stripped my bike down to give it a freshen up, below is a list of jobs i'm planning to do, is there anything obvious i've missed? I'm hoping to have the bike back together and running in 3 weeks time for MMM at Haggs bank. I'm going to prioritise the engine as that's the...
Hepco &Becker Gobi panniers and rack in very good condition to fit any Transalp 650 model.
these cost apx £650 new, now surplus to requirements. £300.
im in Southampton, collection in person preferably, but I’ll discuss other option if required.
John, 07500 214851.
I've just won this ebay auction for a CT90 needing a bit of work. I'm after peoples thoughts on if they think it's a good deal, and anything I should check when I go to collect? It was a bit of a last minute impulse buy.
Thanks in advance,
Has anyone out there got an un-wanted centre stand for a 600 Alp (mines a '98 model, but earlier ones should fit)?
Checked with that excellent source of new Honda parts, David Silvers, and apparently the stand is no longer available.
The after market availability of a stand is very patchy as...
Due to the new regulations banning pre-2003 motorcycles in Singapore, I have to part with my beloved AT within the next 20months.
Though there is an underground protest movement by the classic/old bike enthusiasts, I don't have much confidence that any changes will happen.
Hence, I'm looking...
Right, im looking for some ideas to mount rear pegs on my dommie project. Would prefer them to be removable, as they will only be fitted if i take my son for a ride. See photo below. The only idea i could think of, is two weld two nuts on the inside of the curved upright, so i could then bolt...
As the title suggests, I am toying with the idea of altering my Varadero by fitting a different petrol tank from a VTR, has anyone done this or used a tank from a different bike? If so how difficult and what was required? All replies welcome:thumbup:
Just completed a DIY install of some auxiliary lights.
Some £11 Chinese specials were recommended on another bike forum. They came in 3 days from European stock.
Great build quality - will see how long they last ... They come in two versions; Flood or Spot. I bought the Flood version...
On the off chance, does anyone have a list of bearings required to rebuild a 2000 nx650 (not engine internals).
Wheels, Swing Arm, Linkage etc
As a lot of people have rebuilt theirs, thought they may have a list lying around with this info on.
Pair of Ammo Box Panniers Due to having too many panniers I am selling a pair of ammo box based panniers. They come complete with stainless steel fittings for the Givi type frames but could be adapted very easily for other types.
They have been sprayed satin black and have not been used...
Today, I aimed to start my RD07a after full stripdown.
Fresh fuel in tank. new plugs, and battery fully charged.
Cranked over until battery flat ... nothing not even a misfire.
Working on theory that spark and fuel are normally required I checked both.
Spark - excellent
Fuel - no significant...