Honda XRV Forum banner

rev

  1. Africa Twin
    Hello! I did a quick search in the forum but didn't find anything similar to my issue. My 2nd gear rattles quite a lot when I open the throttle throughout all the rev range. The rattle occurs only in 2nd gear and only during aceleration. I'm sure it comes from the gearbox and it's not something...
  2. Africa Twin
    Hello ladies and gents, So, right in to it. As the title states my 2000 RD07 J-spec if that matters won't start. Quick clarification, I've hunted through the forum and thought I was on the right track on the parts I changed out. Symptoms: Fired it up this morning warmed up and idled fine, rode...
  3. Africa Twin
    Hi guys. I recently bought my first AT RD07. It`s an import from Austria, and I`ve learned that those models are restricted. The restriction in the inlet has been replaced with normal full flow inlet rubber manifolds/isulators by PO. But what about the camshafts they put in the Austrian models...
  4. XL
    I have recently purchased a 1984 XLX250R & on my first ride today I am unsure if the speedo or tacho are reading correctly at 80klmh the tacho reads around 7k it seems to be quite high the gearing is 14--40 & I read std gearing is 13--38 which is not too far away can someone give me an idea of...
  5. XL
    Hi all just brought a xl250 degree and have got a running problem which is u cant go flat out as it cough and splutters (getting to much fuel) as when i take the air filter out and side panel off runs absolutely fine but if i leave air filter out and just put side panel on it starts to cough and...
  6. Africa Twin
    I think one off my cdi's have gone. The bikes rev counter has gone crazy the bikes misfiring badly. Feels like it's running on one. My question is I don't think these are the original cdi's and I'm not sure what to order. These read right on eBay but don't match mine 262455285638 Or do I...
  7. Transalp
    hi all, i have xl650 it has 58k km on the clock, i noticed my clutch slipping on high rev, how should i know is it clutch or clutch cable already worn out? clutch leveler has a lot of travel too.. thank you all
  8. Dominator / FMX
    As you know I had some issues with the bike, two new CDI's from ebay and nothing, some coughing and spluttering but the bike wasn't starting reliably and then the carb decided to piss fuel all over the garage floor. Carb was fixed easy enough, broke the choke but had a spare, still with the crap...
  9. Africa Twin
    Hello guys! I have been reading the forum for a few years since I got my first AT and now decided to make an account to ask you for advice! I didn't know how to name the topic so you can get an idea from the title what is the problem... But now I will explain :icon_smile: I got a '96 RD07A in...
  10. XR
    Hi guys, a quick one. I've been trying to resolve my XRs fueling problem for a while now. It's main issue is that it conks out. If I rev it and let the throttle snap back, it tends to simply die. Whereas if I gently roll off, it stays running. I'm running #168 main and #62 pilot jets, clip...
  11. Varadero
    Hello all. Hoping to pick someone's brain as I have no idea. Got a 2001 vara with 38000 miles. Used to be be my pride and joy until she let me down Basically she runs fine, idles fine. But when stationary and goes to pull off it just feels like it's going to die with no power until you rev it...
  12. Transalp
    Hi all,please bear with me,this has been a tricky few months,after a couple of years trouble free riding! A couple months ago started sputtering,backfiring,rev counter playing up,eventually found out was cdi unit. On trip up north a month ago,same symptoms,but with more smoke...just replaced...
  13. Transalp
    Hi I've just bought a Transalp 650 and it appears that the indicator relay needs changing. Can anyone tell me how much of the fairing do I need to remove to access it? The indicators are a come on randomly or when I rev the engine up and there is lots of clicking coming from the relay. Any...
  14. Transalp
    Hi, I'm the proud owner of a 2011 Honda XL700V Transalp and am still getting used to riding it. One thing that I'm not sure if it's normal or not though is that the bike stutters (like it's about to stall) between 1500 and 2000 revs consistently. This makes commuting in Central London somewhat...
  15. CRF - New Forum!
    Hi all, Honda crf 250 x mods biggest bang for your buck ... open air box (check out c.c.c rick ramsey for pic)( C.c.c closed course competition mods ) Rejet honda crf 250 x they come woefully under jetted very lean, you will get a big improvement (allowing the engine to breath better) in air...
  16. Dominator / FMX
    Well it had to be too good to be true, 44 miles in to my day off first shakedown run and STOP. Bit of background, she passed the mot yesterday and i got a quick 30 miles run before home. So far so good, today i planned running south to Larne then up the beautiful Antrim coast road home to...
  17. XL
    Recently rebuilt a 1980 CT125, had high rev misfire, ( similar to "4 stroking") appeared to be due to cam shaft journal wear "bouncing" the points so had bearings made and fitted, still had a misfire which stopped when the advancer was locked, Someone previously had welded the original advancer...
  18. Transalp
    On the 600 transalp it says on the rev counter X 1000/min - 1 I.e. To the power of minus 1 Why does it say that? Surely it should just say x 1000/min? Ie when the needle is at 4, that means the engine is doing 4000 revs per minute If you raise the revs or the minutes to the power of...
  19. Transalp
    2006 Transalp. I got work but when I tried to start it, going home, it was completely dead. As if the battery wasn't there. Got it started from a battery pack someone had. It ran roughly for a few minutes and the rev counter was working intermittently but after a few minutes it ran fine. As if...
  20. Africa Twin
    ridden daily, as often as possible. tank brimmed until 2nd fuel light appears (every 4/5 days) until recently. last week started her up, set-off, 2mins down the road she coasted to a halt. waited a min before re-starting, happy on tick-over but wouldn't be rushed into higher rev range for a...
Top