just doing the valves on my 99 xr400 and in the gasket kit are 4 o rings but when i took the valve stem caps of there is no o ring in the maunual there is a pic of the o rings but cant find any on mine anyone help
hi i have an XR400 standard bike, i live in portugal and parts are hard to get, i am looking for piston ring set and top half gasket set with valve seals any idea where to get them in uk thanks kevin.:cool:
I have been lucky enough to be the new owner of an 96 XRV750. As we all know there are not many here in the US and I'm excited to get her on the road. I'm working on rebuilding the motor and I can not find info on what grit of hone to use to re-ring. I have factory rings and the bores...
I just looking for Oil Temperature Gauge for my '93 RD02. I found lot of them at ebay around 30 EUR for rd08, and 65 eur for rd02.
As far as I know, the thread size is different: RD02 has around 29mm, and RD08 has 20x2.5mm.
But, the rest of the stick is same?
If this is true, I...
I need to replace the large O-ring that sits between the carb boot and the head on my RD02.
Does anyone know where I can find one as most of them are in the States or cost £10-£15 to post an O-ring that costs about £5...:(
If anyone has a spare they would be prepared to sell, that would be...
My shiny new piston and rings have arrived but which ring goes to the top? There is no edge profile to worry about but one ring clearly has a shiny edge and the other is dull. There is no marking to indicate which is the top either. So lets have a group guess shall we??????
Many thanks. Ben...
I need a new o-ring for my fuel petcock. Rather than order an original honda part which will take a couple days to me (and possibly bug the honda place where I just picked up what I actually needed via another order), I was just going to source a generic o-ring for this tomorrow, then I can...
I sweared over and over last night when I reinstalled the RD07's collector. I tried fitting them using the copper rings and it was impossible. The collector would always be crooked. I tried half a dozen ways without success... I finally decided to reinstall it without the crush copper rings...
Its been a while since I dissassembled my clutch, and now I'm not 100% sure how to put it back together.
Number 7 on this, is a V-shaped ring. But I can't see which direction is has to be pointed.
in this scetch, should the SMALLER diameter of the ring be pointing towards the left of...
Honda part numbers 91307-PH7-660 and 90112-MT3-000
Honda OEM O Ring (13.5X1.4)
Screw Pan 6x20
Honda part numbers 91201-MF2-003 and 50524-MN8-000
OIL SEAL (12X28X7)
Rubber, stand stopper
Honda part number 91302-MB0-013
O-Ring Water Pump 32.95x2.62
Offer for the lot?
Last week 7 of us rode over to the Moto GP in Assen. Not my cuppa tea I must say which wasnt helped by it pissing it down. The next day, Monday, 6 of us rode down through Germany and amongst other things had a blast around the "Ring". Now that...
My 1999 SLR 650 is for sale. It is a fabulous winter hack (a bit scruffy) that runs and rides superbly. 21000 miles and currently on a sorn but I am confident it will go through an mot no problem.
Email for pics on [email protected] or ring me on 07428117644.
It is going on bike trader for...
Before I head down to the local hardware store, I wonder if any folks have 'collected' surplus tools over the years and would be willing to sell these.
I have the spark plug tool, but I am particularly interested in a set of ring wrenches (10/12,17 and 24 mm).
Thanks in advance!
Does anyone here have any recommendations for a decent map holder to fit the TA700 tank?
I used a magnetic tank bag on my old bike but the plastic tank covers has ruined that. Tried a tank ring tank bag but the fuel cap is too far forward on the TA for this to work with anything of a decent...
Looking for a top quality 10w-40? Look no further!! Opie Oils has the perfect solution!
Shell Advance Ultra 4T 10w-40 is now only £26.95 for 4 Litres at Opie Oils which is a MASSIVE 37% OFF RRP
Don't forget you get an EXTRA 10% off the price with your forum discount which can be found...
I have to sell my recently acquired SLR 650 which is a 1999 model with 20000 miles on and best described as being in oily rag condition. The bike runs beautifully but has a makeshift rear mudguard as a previous owner has 'bobbed' the original one.
The bike is in. Sutton in Ashfield, notts and I...