I have 25mm handlebar risers on my @ and have just fitted starbars. Thing is, the bars are a tad longer than standard bars and on full lock the engine revs due to the length of the throttle cables not being enough. I like the new bars and also like the risers, so is there a longer throttle cable...
Hi!
I know there is a thread somewhere but i couldn't find it. Which is the maximum height of risers one can add without changing all the cables?
And can someone recommend me some?
Thanks in advance
Is there any clutch cable that has the same ends as the stock cable but longer to fit a RD03?
I herd that the RD07 might be the same but longer ?
Traveling The World Two Up on a 1989 Africa Twin 650.
Updates Here:
www.instagram.com/Africa.Twin.Adventures
www.facebook.com/DHealy91
Hi all,
Has anybody fitted the "HeavyDuties" 60mm bar risers with Renthal FatBars ?
I have HEL brake lines so they should be fine but what about speedo, clutch & throttle cables ?
Bike is an RD03 and front end is stock apart from the brake lines.
Traveling The World Two Up on a 1989...
Handlebar risers for transalp 600. And 20 mm its to short.
To expensive on ebay £46 ! ridiculous...
Do anyone know where to get them cheaper? or anyone has a milling machine? a garage or something...
Transalp 600 crash bars, racks, risers & tall screen
Hello all,
My first post and wanting something already!
Just bought a transalp Xl600V and after a few accessories...
Crash Bars
Pannier racks
Taller front screen
If you have any of the above please reply with a photo if available...
After a set of cheap bar risers for the rd04 22.2 mm bars.Don't want more than 25mm rise.
Any ideas, quite happy with universal ones of any colour, new / used, nothing fancy just something to raise the bars a bit.
Cheers Bob.
After a set of cheap bar risers for the rd04 22.2 mm bars.
Don't want more than 25mm rise.
Any ideas, quite happy with universal ones of any colour, new / used, nothing fancy just something to raise the bars a bit.
Cheers Bob.
As my RD03's rebirth starts to wrap up, I realized I still have bent handlebars. I use 35mm bar risers and the height is perfect, I would like to retain that. I would ideally like to not have to change out hoses and/or cables by going with a differently-sized handlebar. Does anyone know which...
Bar risers Touratech XChallenge, XCountry, Xmoto
Removed from XChallenge as I now have different WP forks/clamps.
20mm bar risers. In the TT catalogue they’re £25 plus shipping and allegedly take 10 to 14 days. This usually means 10 to 14 months.
20 mm handlebar riser BMW G 650 X...
Hello. I purchased a Bagster tank cover for my 1990 RD04 XRV750 today. I am not familiar with Bagster and am writing to receive a recommendation for a Bagster tank bag that would fit nicely on the AT's Bagster tank cover. My AT has small bar risers. I usually use a tankbag for maps and...
Hi all,
Iam planning to add both fork slugs (height increase 4,5 centimeters) and bar risers (3,5 inch, but pivoting forward - say 5 centimeters extra height) to my newly acquired AT RD04 (build thread coming soon...). I believe this will cause a need for longer cables/hoses, possibly all four...
Looking to put some Pro Taper bars on the Africa with Rox risers question is how much rise before the cables have to be changed? Anyone got this set up?
New, never fitted. Cost new £28.77 plus p and p, plus the delay to receive it as TT UK have nowt in stock and have to order it from Germany.
Fits MANY different bikes. Please see original TT webpage:
Folding mirror, length adjustable for BMW F650GS/ F650GS Dakar/ G650GS/ G650GS Sertao/...
I recently put a set of 30mm Zeta bar risers on my 2008 Varadero. On bumpy roads they will slightly rotate....and I suspect they would move even more under emergency braking. I have them installed correctly as per the instructions and I have them torqued as per the maintenance manual...
Planning on buying these since they are on sale. I would like a bit longer hoses than stock since I am planning on bar risers also. Reading through topics here it seems they do come a bit longer by default but don't if there is enought slack for 25-30mm risers or should I order a bit longer...