I have just bought a 05 xr125l it does however need a new carb. I have found carbs that will fit and work but none seem to have the heater like the stock one fitted. If I got a
standard carb with no heater will it run ok or so I need one with the carb heater.
thank you :)
My 2001 AT has 18,000 miles on it. It runs poorly and stumbles and vibrates a lot. Over the winter I think a carb strip and rebuild is in order.
Any thought as to have far should I go?
Fit new jets, gaskets, etc?
Replace diaphragms (if fitted)...
What is you experience after the decat, do you get blue header pipes colors? Did runs the bike not more the 20in without the O2 sensor elinator, could that be the reason? With the lambda/O2 sensor, would the blue coloring stop?
Has anyone else had this happen , when warming up the bike to change the oil , the engine hesitated then stall the temperature was 76 degrees, when i tried to restart the , the engine would only run on 1 cylinder but not tickover i kept it running with the throttle, can anyone help
I have a 1986 XR600 in generally good over-all condition, don't think it would need much if indeed anything for M.O.T, runs away fine a bit of smoke on start-up but probably partially down to lack of use, would appreciate if someone could give a rough indication to value as have owned...
My 89 has RD04 H4 headlights in it. I'm thinking of changing out the bulbs for LED bulbs like these - https://www.cyclopsadventuresports.com/3800-Lumen-H4-LED-Headlight-bulb-_p_83.html
I've read threads where people have used the cheap Chinese LED bulbs without problems. Anyone running them on...
Hello all. Hoping to pick someone's brain as I have no idea. Got a 2001 vara with 38000 miles. Used to be be my pride and joy until she let me down
Basically she runs fine, idles fine. But when stationary and goes to pull off it just feels like it's going to die with no power until you rev it...
Witch relay is the headlamps/lights .... ive got a intermittent problem with them doing what they want ... the main beam does not work nore does the side lights ... when there on there very dim and yellow in colour ... i surpose it does not help when your running 2 900 lumin spot lamps :D
Does anyone know if there is running lights available (later model?) that would fit sockets for an 87 TransAlp XL600V H model Canadian bike??? Also a lighter than stock muffler recommended??!!:rolleyes:
I have just stripped my transalp down and had the frame, swingarm and wheels powder coated. I will be starting to put it all back together soon.
The engine was running 'ok' before I removed it, but while its out what (easy-ish) jobs should I be considering?
Its done about 41,000 km
Xl600v Ok after about 1 hr of steady riding my water temp rises, sits at about 80 degrees upon hitting traffic after this it will rise up to 105 degrees then fan comes in and lowers temp.
My question are....
1. Is this normal?
2. Do your fans come on?
3. What temp does your alp run at?
I have a spare engine for sale
It came with a job lot of parts, I only needed the other parts so this engine is redundant
It has apparently 30k on it, there is some wear on the output shaft, other then that it looks to be in decent condition
Obviously I haven't run it so can comment on its...
I have a facet pump That came with my rd07a I am looking to put the original pump back to the bike as Mr HONDA intended. Is this a simple task? Or faff
I am just curious to see how the bike will run,and like original stuff.:(