Hi all, Just asking if anybody has experience with JT’s rubber front sprocket on the XRV? We all know why many use the OE Honda front sprocket but since they cost about €30-35 and the JT cost about €15-20 it could be just as good.. Just for reference the JT sprocket is JTF296-16RB. other...

Hello, i notice one of my grommet's is missing and I would like to replace it Looking at the Honda diagrams they seem to be coming up as Air Cleaner Case Grommet's and the part nr is 83551-300-000 Can anyone confirm ta Rod

Im getting a wheel respoked for my @ and want to use the best rim tape so I have looked on ebay and it looks very thin. I have some used pieces of rubber membrane I used to waterproof a roof and it was way more expensive than I thought and very good quality. Will this be better to use than £1.99...

Just in case anyone else in the UK needs one of these parts and does not want to pay the stupid price of £32 :disgust: ........ (these are only $15 in the states) I just made & fitted today, seems OK. Cost me about £2 & 1/2hr effort. (I bought a 25mm thick hard rubber dapping block on eBay)

Pair of Givi Pannier Racks for Monokey Cases. Suits XRV750. Givi Part Number PL148. In very good, almost new condition in black. Comes with, as supplied fixing, fasteners & spacers. Please note, one of the rubber stand offs is missing.... in my garage somewhere, but is currently hiding! These...

Hi all ,does anyone have for sale or know where i can get the rubber grommets which mount the bash plate to the frame mine have perished and i dont seem to be able to locate the grommets locally .. Will i have to go to a Honda dealer ? Any one with an alternative or like i said, some spare for...

On my last AT I had a volt meter that I bought from ebay that was basically a bulb in a rubber shroud that changed colour depending on the voltage. it was the perfect size to fill the space in the dash box that houses the lights for oil, neutral, highbeam, and indicaters. I have spent the...

Hi guys I'm Marco from Belgium. I have an RD04 from 1990. It's a great bike, but has had some bad owners that didn't maintain it. :( I have replaced the rubber inlet seals, valve cover seals, fuel hoses, blablabla... =) Now i am left with one part: a screw, a tiny washer and something on...

Hi i have two part numbers which i cant conclusivley identify ? both should be for the front cowl / fairing . 90111-mm9-000 and 90156-se3-003 What i need is to replace the perished rubber bungs which combine the nut internally i think its a 5mm nut(could be wrong) I have 12 screws holding the...

Hi all I need rubber pads for underside of Top Sellerie comfort seat as all but one have come unstuck. I could concoct something similar to the hard rubber pads but wondered if anyone knows of or has some laying around. I thank yous all.

I'm off on a long tour around Europe next year with the misses me on the xrv750 her on a cb500x. I use the twin off road a bit but the trip around Europe will be road, I'm looking at putting new rubber on and what something that lasts on road and off Is the mitas e07 a good choice for the twin...

Hi Guys, I have an issue with the OE indicators on my 1996 RD07a for the second time since I have owned the bike all the stalks , black rubber parts , have split and cracked off . Does anyone have any alternative types that will fir , preferably not LED ones , any ideas will be most welcome...

Please delete Please delete. Sorry.

I am curious. When I removed my center stand before the restoration, I didn't have these rubber o-rings. It seems my center stand has a little side-to-side play. I bought two from my ,ocal hardare store and they are smaller. They do fit the two sleeves/ pivots. Where do these o-rings go? I think...

Pillion foot peg rubbers on my Dommie are perishing and falling apart, currently held on with cable ties. Despite the fact I NEVER take a pillion, this has been bugging me so I bought new ones from David Silver. Does anyone have experience/ top tips for replacing those? It looks like it...

Hi everyone. I have a 96 Dommie that I use for all sorts of travel on and off road. I noticed recently that the bars are moving more in the rubber mounts. Can the rubbers be removed and replaced? I tried tightening the nuts under the top yoke but still they seem to wobble more than before. I...

Just had this subframe professionally sandblasted and powdercoated in gloss black. Came up well - probably better than new as Factory finish is terrible. All rubber bushings present and undamaged. Came off a 2001 RD07A - guaranteed straight. My understanding is that this part only fits this...

If you hold the handlebars and rocking back and forth is loose in the rubber that sits between. Is this common in XRV? it is possible to replace the rubber?

Well guys, Im looking for near side (left side) segment for my 1998 750 AT. The current one is quite banged up and beyond repair. Anyone know where i can get just the left side? I've seen plenty of add fro the full pan but i just need the left. Also the rubber washers at the mounting points...

Does anyone knows if the rubber bushes from the top yoke that takes the vibration from engine/road can be taken from something else? If there are any bushes compatible? as the same sizes? it's within the nr 14