Looking to replace all the fuel lines on my RD03 as a couple more leaking a bit nowadays. Rugged roads has 4or5 sizes. What is most common I would need? I plan on buying some bulk lengths. They have 4.5, 5.5, 7.3 and 8mm ID. Mine are so old going to be hard to determine sizes. I know I have used...
My XRV750 CDI (rd07A) is giving probs.. the silicon melted off..
Am looking for a aftermarket replacement as the Honda original part seems very exp.
i tried rugged roads as well, part not avaliable...
Thanks guys! :o
I have a question;
I run the 17t front sprocket from JT on my RD04, however, JT does not make the rubberized version of the 17t sprocket (JTF314) which id like to have, they only make the bare 17t version.
However - Rugged roads sells the 17t rubberized OEM honda sprocket...
OK so I'm on a roll now asking questions!
Bike warms up lovely when stationary, temperature gauge showing where it should be however, as soon as I start riding gauge drops to zero.
I'm guessing that either
a/ Thermostat knackered
b/ Thermostat doesn't exist.
If either a or b I need to replace...
If anybody has bought the indicators from rugged roads
could you please tell me what bulb it uses,
If it has the foam seal inside like the oem does ?
And is the lens the same as the oem?
If you could upload a photo of the rugged roads lens & bulb it would be great :)
Here is one...
Bike was running perfect and I decided to fit rugged roads snail cam chain adjusters which only involves taking long bolt out etc. Went out on bike today and brake performance not good. The rear brake used to be very good and I didnt think I lost a spacer but what have I done wrong?
Does anyone know how to remove the lower triple clamp from a set of ktm 950 forks? I have the bearings off but the steering tube is stuck solid and my finger cant't take another whack with the lump hammer. Also when I get this off how do I fit the adaptor back in?
So I may be taking a ferry over to Dover from Belgium in a couple of weeks. Was thinking of going up to the Bath area but now just thinking of taking a left off of ferry in Dover and heading out towards Exeter or such. Really don't have a plan per se just trying to get a little riding in. How's...
Just dropped my AT today at slow rolling speed and thanks to those Rugged Road crash bars any serious damage was prevented.
But the right one took a substantial hit and it absorbed all the force which resulted in it being slightly bent inwards.
Is it possible to bend it back?
I will post some...
I acquired a centre stand for my RD07 yey! But now I am scratching my head a bit and hope someone can help with a couple of Qs... I searched t’Internet but thanks to online image hosting service change, most images seem to have dissappeared.
[So... sorry to resurrect the old...
I'm currently rebuilding my 1988 RD03 beloved twin and I need to replace my 2 rims, and to be honest I'm not a fan of the Excell one proposed on rugged roads... so I had a few reads on the forum and eBay seems a good option, but I'm a bit confused about it....
so my question is...
Can somebody recommend the best inner tube and size for an @ went on a stoney path and my last one nearly pulled the valve out I did find this one but not sure it will fit 17X450/510 michelin heavy duty from rugged roads
Hey guys, my name is Marcel and I'm from the Netherlands. I recently bought an '88 rd03 and I'm slowly taking it apart/fixing things/putting it back together. I just did a carb revision (with some help from a friend), cleaned the tank with lemon juice... bought some new tyres, new oil, filters...
my RD03 chain has its days now numbered...
I was puzzled.
Wemoto sells as a replacement a DID 520
Honda XRV 650 J/K Africa Twin 88-89 DID Chain and JT Sprocket Kit Parts at Wemoto - The UK's No.1 On-Line Motorcycle Parts Retailer
while Rugged Roads a DID 525
DID Chain - 525VX124 Heavy...
Hi lads, I am just fitting new chain and sprockets to the RD07 this morning. I'm fitting the OEM front 16t sprocket and JT 45t on the rear which was all good so far but the chain just doesn't seem to be going around the front sprocket for some reason, it's like the teeth are too thick or the...
Previously fitting to my Transalp for around 4000 summer miles. Complete system comprising headers (72093PD) and Dakar replica can (72639PD). I'll also include new header gaskets.
New price combined is £440 - yours for £275 posted to the UK. For non-UK postage I'd just add the difference.