Anyone know where I can get a set of bolts and screws for my fairing?
'87 Transalp 600 with original fairing?
I have found this one online, but not sure it will fit my early bike?
AKRONT WHEEL: (very good condition, Fresh Truing done)
- AKRONT 18'' 3.0, 32 holes rear Heavy Duty Rim: USED (good condition, signs of ware, no rust) with Heavy duty spokes (v. good condition)
- Originat AT Hub: USED (v. good condition, signs of ware)
- 5XJerk Damper (almost new)
- Original AT...
Hi i have two part numbers which i cant conclusivley identify ? both should be for the front cowl / fairing .
90111-mm9-000 and 90156-se3-003
What i need is to replace the perished rubber bungs which combine the nut internally i think its a 5mm nut(could be wrong)
I have 12 screws holding the...
There’s a small amount of storage space under the pillion seat but access requires a spanner to remove two 10 mm screws.
This spanner is in the toolbox by the battery which in turn needs the Allen key under the rider seat.
To make the pillion seat quicker to remove there are two easy...
Had to retire, for now, the 600. Got myself a very nice condition 650.
Couple of issues i've seen so far : The facia on the clocks is very difficult to take off,
I need to change the indicator relay for LED one, not easy to get it off.
I've taken all the screws that I can see out, have even...
Hi my chain broke the other day and it has broken the spud on the waterpump where the front sprocket cover lower bolt screws onto ,also more important the steel chain guard
Pump seems ok otherwise no leaks
I have the broken piece
1, Is there a very good metal glue to glue this...
I desperately looking for a front brake master cylinder for my 2001 Dommie. I completely trashed the screws for brake fluid lid and need to replace the whole thing now. No luck on Ebay sadly.. any one have a spare one?!?!
Or someone have any suggestions on replacements that would be...
i'm having trouble splitting the bottom engine case on my 82 Xl500r,
i have to replace the kick start return spring, i have the engine upside down on the head & I've removed all the exterior screws, are there any internal screws i have to remove & what is the best way to separate them...
I noticed my Africa Twin has been smelling of petrol somewhat lately but I just ignored it as I had no time to look but I was forced to when I had to fill the tank 30 miles earlier than I expected. The leaks had become serious and there were petrol stains on the engine.
NX650 from 1988.
Have a jet kit in the mail and planning on doing Dave's mod.
I wanted to take the carburetor apart and clean it up before hand, but having trouble getting two of the screws in the float chamber out - seem very soft and I don't want to ruin them.
I have PH and PZ...
I have a problem with my 98 dominator. I have tried my best to solve it myself but my mechanic skills are fare from good.
When I bought the bike it started pretty well but it looked that the carburetor was clogged with something. In low revs it makes some black smoke and stalls...
I have damaged the left hand fork slider (bottom at the thread where the spindle screws in). I can get second hand ones from ebay but they are from the single
disk model. Now, the single disk model has the disk on the l/h/s, good, I obviously need the mounts for the calliper, but are they the...
Nothing to do with cold weather!
On the back of the headlight surround on the Dommie there are four nuts set into the plastic, into which the instrument / surround screws go. They're like short brass barrels with a threaded hole, and they're machined / knurled on the outside to help them grip...
Dip beam on the right head lamp has failed. main is ok and both filaments on the left are fine.
is a bulb change as simple as pop the screen off, undo four bolts and remove the front fairing, or is it remove the side panel and dislocate your wrist to do it? Mr Haynes is blody useless o this...
Had some long standing issues with my XRV750 (RD07A). Thrown quite a few bits at it, taken it all apart and back together again, and it's not helped, looking for some ideas.
Exhaust not leaking (tested by putting...
My recently acquired SLR has the carb heater which makes getting to the idle screw even harder than it would otherwise be. As I will not be riding the bike in the winter is there any reason not to remove it and its associated wiring? I assume it screws into a blind hole but if not could replace...
Hi guys, quick question (again). Can I lean out my RD07A front cylinder somehow (moving needle depth, air screws...)? The spark plugs are pitch black and she hammers along at 120km/h. It sounds impressive pulling strongly through the gears but i'm sure it's not the best. Any info is really...
A couple of pics (avoiding the bins) of my new Transalp beastie after this morning's thunderstorm. Shot around Colchester UK - Garrison Church, a victorian wooden colonial style building now owned by the Russian Orthodox Church. And at Bourne Mill built in 1591.
Cleaned out the crappy...
Hi folks, I've just replaced carb float chamber gaskets and diaphragms on my 1989 TA. Bike now runs great. However just as I was about to fit the fairings back on I noticed fuel dripping from the fuel tap. I checked all screws etc and all were fine. I refitted the 2 hoses from the tap that I...