So I bought a well used ‘89 XRV650 which I am rebuilding. The weels are corroded and I need to replace them. I’d like to keep the bike as original as possible so I’m looking to source original DID rims.
I allready found a nice used rear wheel and now I’m searching for a front wheel rim (I will...
I’ve been reading this forumfor quite some time now, but only just joined with an account. Last year i bought the Africa Twin.
I’m searching for a Bagster fuel tank cover in the 1994 white, red (2x), bluecolors.
Does anyonehave it for sale?
Also looking for crash bars. Please feel...
Sorry folks, I'm asking for help again.
I'm going to hopefully be cleaning and stripping the carb this weekend and while its out i will be replacing parts as i go.
Does anyone know the sizes of the carb manifold clamps for both the air filter and inlet manifold rubbers? I would try and...
I've tried searching but haven't managed to find a definitive answer. Is there a direct replacement carb that would fit a 1999 nx650?
I was going to strip and rebuild mine as it's got the usual tickover issue but if there is a better replacement that could be used I may well just go...
I need a new screen and after lots of searching around I have found the one shown in below.... I now need to know where I can buy this exact same screen from. Any suggestions please? Advance Thanks
Bike wont start! Exhasut makes loud bang after piston change and setting cam timing.
I got a stomp juicebox 3 110cc off my friend. He told me he was riding it and the bike slowed down and when he turned it off it wouldn't turn back on. I knew a bit about bikes and after searching forums and...
I have been searching for original hanguards but refuse to pay 80 quid plus delivery for two pieces of moulded plastic. Came across these...v....v...cheap actually got them for 1.80 euro, Ill feedback when they arrive
Has anyone found a replacement for the Stanley 12v 21/5v (#34906-MBB-611) tail light bulb?
I've been searching Amazon, eBay, AliExpress and Google with no luck. You can find single filament
bulb replacements but the two filaments don't seem to exist.
Searching for new downpipes for my 79 XL250S and so far found one supplier David silver, are there any other makers of exhausts for these? or what have other people done when they rust through?
Thanks for any help.
On my last AT I had a volt meter that I bought from ebay that was basically a bulb in a rubber shroud that changed colour depending on the voltage. it was the perfect size to fill the space in the dash box that houses the lights for oil, neutral, highbeam, and indicaters. I have spent the...
RD04 RD07 XRV750 Touring Screen MRA
Bought this high quality MRA screen for my RD07A but it does not fit.
Think if will fit any XRV750 (RD04 & RD07) from 1990 - 1996
These screens are German-made and excellent quality.
Been used but in overall good condition - no deep gouges or cracks.
Hello! After 30 years of pretty serious bicycle riding, I just decided a couple of months ago i'm ready to ride a motorcycle. I geared up, took a basic rider course, put a few miles in on a friends little 250 Suzuki and after a month of intensive searching, found a beautiful, close to stock and...
I'm struggling (failing) to find throttle slides for RD04 anywhere, anyone know. Do i have to search for it using any particular measurements? not finding anything when searching for slides for RD04!? does the RD07's fit?
Also looking for a main jet needle.
Appreciate the help
My son has found a guy here in Denmark with a few projects he inherited off a relative when he popped his clogs.:(:(:(
This guy has no idea what he has or how much they may be worth but everything is for sale.:thumbup:
He is currently searching for all the papers.:cool:
Everything here is for...
Autumn greetings from Viking land.
I am thinking about having a go at wheel building and know absolutely nothing about what I am letting myself in for.
I will be needing something else to do now that my engine re-build is nearing completion.
My project has got a 16x5 inch rear wheel that I am...
Searching up TA700 specs,I can't find any reference to the actual ready-to-ride wet weight. Any number of sites quote dry weight as 214kg. So, if that's correct, it puts the fuelled weight somewhere north of 230kg. That seems helluva heavy to me. Can anyone shed any light?
Question 1... is it called lever or pedal when its the ones controlled by your feet??
Question 2... Can anyone tell me where to get foldable levers/pedals for the Vara. Cant find any when searching the web.
I need a new o-ring for my fuel petcock. Rather than order an original honda part which will take a couple days to me (and possibly bug the honda place where I just picked up what I actually needed via another order), I was just going to source a generic o-ring for this tomorrow, then I can...
I've recently been sent a photo of my friend's awesome dominator what-looks-like-a-softshell he bought, and i gotta Say i'm pretty jealous about his new piece. I've been searching through the internet for dominator crewneck shirts and softshells but i can't find it. Does anybody know...