Honda XRV Forum banner

sensor

  1. Tps sensor

    CRF - New Forum!
    Does anyone know what the affects of the tps wiring being snapped would have on the running of a crf 450x 2005 :confused::confused::confused::confused::confused:
  2. RD04 Fuel Level Sensor Repair

    Africa Twin
    Hi All Can anyone advise how i can go about repairing an RD04 fuel level sensor as per the type in the image. Is there a link available to buy the correct thermistor? I have seen the repair videos but seems this type is different?
  3. 1999 RD08 Tickover Issues

    Dominator / FMX
    Really hoping one of you knowledgeable folk on here can help as I'm having issues with the bike popping on tickover (tickover problems seem common for the nx650 by the looks of things). Sometimes the revs will hang high after small throttle input and other times the revs will drop and die but on...
  4. Getting hot ... water pump ?

    Africa Twin
    Ok so over the last 4 years and 30k this time of year the old girl runs about 55-65 degree according to me RR KATO digi temp sensor to the point were i cover the rads up to get it to around 80 in winter. Now all of a sudden it upto 80-90 degrees with nothing covering the rads :???: Now the...
  5. HISS

    Transalp
    So, on Friday night I parked my '07 650 TA in the garage, everything was fine. On the Saturday morning I tried to fire it up and it just spun on the starter with no hint of life. I then noticed the green 'key' light was not going out, so that is the HISS warning light. I've had the bike around a...
  6. Blue header pipes after decat

    Transalp
    Hello all, What is you experience after the decat, do you get blue header pipes colors? Did runs the bike not more the 20in without the O2 sensor elinator, could that be the reason? With the lambda/O2 sensor, would the blue coloring stop? Cheers Mike
  7. TA 700 TP sensor

    Transalp
    After fitting a LeoVance decat pipe, I started having problems with the throttle position sensor, so i bought a second hand throttle body, I put the original exhaust back on the bike, fitted the second hand tp sensor on to my throttle body, cleared the fault code from the ECM, hey presto bike...
  8. Transalp 700 where is the crank position sensor plug ?

    Transalp
    Hi, as the title says - where is the crank position sensor plug ? - on a 650 it's under the tank on the left side, but what about on a 700 ? cheers
  9. bike camera

    Africa Twin
    Took delivery of my new bike camera yesterday, It has two cameras , pic capture , video , collision sensor , HD and was only £30.. Tested it out and the quality is pretty good, Takes a micro SD up to 32GB, does rolling carture and has low light mode
  10. Bolt identification

    XR
    I'm looking for a place to install an oil temperature sensor. Does anyone know the purpose of this bolt (center of picture) and what the clearance behind it looks like?
  11. HISS light does not enter registration mode

    Transalp
    Hi I have a Transalp 650 2003 model, am trying to programme a spare key - cannot get the ECU into registration mode. I have followed advice on the forums and made a lead with a 100ohm resistor in the positive lead. Found the CKP sensor joins the loom under the petrol tank near the thermostat...
  12. TripMaster Speed sensor pair how they work?

    Africa Twin
    Hi, I am new here and as a Africa Twin owner I need some help with the TripMaster. Basically, I need to understand how the pair Tripmaster-Speed sensor work. I want to capture the pulse that the Speed sensor generates when the front wheel is turning without having the Tripmaster connected...
  13. XL700V o2 Oxygen Lambda Sensor Eliminator, what is the resistor value?

    Transalp
    hello all, looking option to de-cat the XL700v and the good old problem with the oxygen sensor comes back seeing a 10£ resistor makes me wander: what is the resitor value? o2 Oxygen Lambda Sensor Eliminator For Honda XL 700 V TRANSALP 700 2008 - 2015 | eBay next would be a universal 50mm slip...
  14. Oil Pressure sensor wire connector?

    Africa Twin
    can somebody assist with this please? got a new oil pressure sensor as the old one didnt look great, but when I degreased the cable from the wiring loom and peered inside whatever type of connector was in there is snapped off.. when I look at the parts fiche it just seems to be part of the...
  15. Temperature gauge.

    Varadero
    Hi all, After fitting a new engine I now have a problem with the temperature gauge, it's stays on 1 bar. The engine runs 100%, the water pump and thermostat are fine. I have a spare temperature senser so I pulled off the wire from the bikes sensor and plugged in the spare one and put it in a...
  16. Speedo sensor

    Varadero
    Got a XL1000va-5 'Dero and the speedo sensor has died, found a replacement off the 'net but struggling to remove the left hand bolt from the old one. Is there an easy way to do it?
  17. Exhaust system

    Varadero
    I'm going to change the gaskets at the weekend , just been out to spray all the bolts with WD40 and I noticed that there is what looks like a lambda sensor on the collector box but the wires have been cut . Should a carb model have a lambda ? Thought it was for fuel injection ecu's ? Wondering...
  18. Fuel tank leaking when removed to replace air filter

    Transalp
    Hello, I changed my air filter last night to a new K&N one (old one was grubby!) When removing the tank, I removed all of the hoses / fuel sensor cable. Where the smallest tube on the right side of the bike attached, I had fuel coming out. Is this normal? I was sure that no fuel would come out...
  19. Decat question.

    Transalp
    Hello peeps, I've just fitted an o2 sensor eliminator, and I have to say the bike really has responded well to it, the fuelling is unbelievably smooth. I was also after a louder soundtrack ( not offensive, just nice & deep ), and was going to fit a decat pipe, leaving the standard silencer. I...
  20. Transalp 600 oil pressure boss crack

    Transalp
    Hi, I've just seen the boss which holds the oil pressure sensor has a crack, probably from over-tightening the sensor. I'm thinking of drilling a channel on the length of the crack, clean it and put some Al epoxy then some tiger seal at the end of the boss just as a sealant. I don't know...
Top