I need to find a Triumph cranksjaft pinion puller so I can get the pinnion gear off my cranlshaft...
They are for sale for about £50 on ebay and I was womdering if any of you lads had one for sale?
I have to get one otherwise I cant seperate the crank cases to get at the crank shaft...
Ok my tripmaster is dead what do I look for.
Is there a seperate fuse ? According to the manual there is an in line fuse somewhere on this model to the trip but where is it ?
Rd04 1992
Cheers Bob.
Afternoon all,
With my XR400RY 2000 I collected today came it's original paperwork which has a seperate booklet n competition preparation taking in a range of aspects.
It also deals with re-jetting (I've seen a thread on here).
If anyone ever needs a copy of the info contained, just PM me...
I wondered if anyone knows what the loose part was that I found when removing the plastic front sprocket cover please? It looks a bit like a battery earth metal strap. The cover has the metal part behind to stop the chain eating the casing if it slaps or comes off but whats the seperate small...
Touratech pannier racks for Triumph Tiger 800/800XC
These are virtually brand new , I fitted them to the Tiger in May and used them once.
They are black powder coated stainless ( not rust prone mild) steel.
They are so easy to fit with Touratech instructions now in English and even a total...
No need to explain what they are to the folks on here.
These have the mounting pucks and all matching locks fitted (single key fits all 6 locks).
They are is great condition with absolutely no dents, bashes, or dings.
They only have very slight surface blemishes due to having had tool rolls...
Something the well travelled AT owner could use ?? Don't know where else to put this post other than in reviews..
Lightweight , simple , old fashioned and does the job..water hot enough for a brew in 5 minutes..comes with a couple of pots, frying pan and seperate handle. Uses pink spirit to...
Hi
My sons XLR125 (02) was stolen approx 6 weeks ago, and we have managed to recover it, minus just about everything that could be removed,to make it an off roader including believe it or not the whole front brake assembly, from the lever to the disk .
We have sourced most replacement parts from...
I know there's been ride reports from Oradour before, but here's mine.for those of you who aren't aware, some background:
10th June 1944. 4 days after the normandy landings & resistance activity in the Limousin region has redoubled in an attempt to prevent german troops moving north to...
Confirm with Broad Farm
Sort Out How we're going to take payment, £7.50 or £10 / night per tent?
Do we need to consider insurance
Fire Pit
Alternative Accommodation - Caravans
Info sheets where the local stuff is or just post on forum
Rideouts
Confirm with Broad Farm - I assume they know we are...
Twin broke down a mile from home yesterday, as if it had run out of fuel. Switching to reserve it would only (eventually) start on one cylinder, but after a push to the petrol station fired up immediately on both.
Bemused, I took it for a run and it felt hesitant and popped a lot on the...
Ok,
project going slow but seen as bike half apart want fit what i can and need to bike now and nto later.
Plan is as follows.
1 - Fit eastern beaver 3way fuse box, sadly this is a messy loom not as neat as his 8way fuse block. so have get inventive with mounting to keep it all neat and tidy...
Hi,
This may be a dumb question but I was changing the spark plugs on my 1990 AT this morning.
Everything was fine until i pulled at the lead on the RR cable and the cable came away with a pop while the spark plug cap/seal stayed where it was..
I see on the cmsnl site that these are seperate...
Doh.
Like a tw*t i have sheared off one of the 4studs that holds the front axle retaining plate in place! I am due a few days away on the bike as of tomorrow morning and want to try and sort it out tonight before I go.
I have read that it is possible to remove the stub with mole grips or alike...
Hi All
I have put a CRF clutch/hot sart perch on my xr 400 to tidy it up from the seperate clutch and decomp lever, it all went on with out to much hassle, but I would say the decomp cable is a fraction short, it is all work ok but I would like it a little longer, does anyone know if the 250...
Hi folks,
I really need your help on this on..... bit unusual.... smashed bearing area of the hub (see pic)
In the process of changing my rear wheel bearings on my pride and joy RD07A (2000 reg) as they were majorly buggered, when the sprocket side bearing plopped out so did half of the...
Hi guys..
well after all the hard work on the trails the fork seals have gone in one leg..so new seals/dust covers and clips ordered from David silvers..just need fork oil and I`m ready to attack.
Any tips apart from Patience and loosening the fork caps before the tree clamps ...
Is it easy...
Hi all
I am new to forum and am finding it really helpful. I just got me a 1999 XR250RX and lovin it. I am having problems with the rear light and brake light. If lights are switched off, brake light works fine and bright. If I switch on headlight, front light works but rear light doesnt, and...
The plan was to meet Whealie at the Ace for 11am (everybody else's 11 not mine) and then ride to meet Sean in Silvertown. I lubed the chain and set off on the short ride to the Ace. Well I didn't know that there was an idiotic car driver rally on near mine. After being cut up by Nissan Micras...