Honda XRV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Africa Twin
    Hi AT friends, would apreciate your help again :) I will get a top end engine job done in Malaysia soon. Hopefully just change of pistons rings, but who knows when opening.. My mechanic (Sunny cycle in Kuala Lumpur) says i might also need a slightly bigger piston. He says you can get pistons...
  2. XR
    Being a vertically challenged 5’7 90kg with 30” inside leg I might need to lower my (new to me)Xr400r a tad! ive bought a second hand seat and will be sending it off to get the foam shaved down a bit and a new seat cover but think it might not be enough! Was considering a lowering link but it...
  3. Member Classifieds
    A set of Givi (I think!) crash bars that fit all 600 Transalps (according to EBay sellers) They are used and have scratches and a small dent (filled) They have been given a coat of black paint to preserve them. They were removed from a 1992 TA (pictured) as I am making a naked TA. To be...
  4. Transalp
    Started to change the output shaft on my 700 XL. All the bolts holding the chrome heat shields and the painted heat shields were sized in so that took me around 4 hours to do, I’m a slow worker, drill out re-tap the holes and order new bolts. The rest went as I expected it to no real drama...
  5. XR
    hi i have an XR400 standard bike, i live in portugal and parts are hard to get, i am looking for piston ring set and top half gasket set with valve seals any idea where to get them in uk thanks kevin.:cool:
  6. Africa Twin
    So I bought a well used ‘89 XRV650 which I am rebuilding. The weels are corroded and I need to replace them. I’d like to keep the bike as original as possible so I’m looking to source original DID rims. I allready found a nice used rear wheel and now I’m searching for a front wheel rim (I will...
  7. Member Classifieds
    Hi guys, Got a set of original black crash bars for an AT RD04, for sale. Asking 110 EUR which is about 95 GBP ? Don't know how to upload here but can send them by email, pictures. For perfect condition they need some new paint. Comes with all bits to attached them to your bike. Can ship...
  8. Transalp
    I have a set of headers that were sold to me as for a 600. they came as a complete exhaust with the standard muffler. But the front pipe is clearly set for a 650. However there is no catalytic converter. Am I right after research that they will be from the very early 650 before 1992?. Please...
  9. Africa Twin
    How much, all in would a set of USD forks cost, inc wheel, disc caliper etc off a KTM640 supermoto/enduro and everything I need to fit it to my bike (RD04) and what could I get for my original forks, etc? Basically swap out the whole front end - labour aside - wopuld I break even?
  10. Transalp
    Hi Chaps, XL700VA, 2008 with 20K miles on the clock. Riding along a few weeks a go, on full throttle the engine cuts. Roll the throttle back off and it picks up again. Every time I open the throttle the engine dies, but picks up again when I roll it off. Bike is un rideable. No MIL . Turn it...
  11. Member Classifieds
    SOLD £150 A complete set of Honda luggage for 99-02 (carb) Varadero boxes, racks and fittings removed from 99 Varadero XL1000V. The Honda panniers tuck in closer than most aftermarket boxes of the similar capacity and the pannier racks fit closer around the silencers. The topbox has the Honda...
  12. Dominator / FMX
    Hello, I guess this is my first post here. I hope to post more. I have bought an FMX 650 2006. There are no stickers on it, except one on front fender, and one on right gas tank side, but they are not original. I was wondering, is there any electronic version of stickers, whether they are...
  13. How to.....
    Can anybody help with the setting up of the front end after fitting these units setting up of the unit ? (Turns down) oil level oil wieght Cheers agent
  14. Transalp
    Anyone know where I can get a set of bolts and screws for my fairing? '87 Transalp 600 with original fairing? I have found this one online, but not sure it will fit my early bike? https://www.pro-bolt.com/aluminium-fairing-kit-honda-xl600-vr-vx-transalp.html Thanks!
  15. Member Classifieds
    Here I have a 3 part set of Nonfango hard luggage. It was removed from a 2002 XRV750 but you may know if it will fit other models. There is a 52 litre top box which will take 2 full face helmets and 2 panniers which are a sort of teardrop shape, one end narrower then the other. the top plate...
  16. Dominator / FMX
    Apologies for yet another possible carb issue / tickover problem post but before I go and take the bike for some dyno time and tweaking I've been trying to make sure everything else is ok. Work so far including recent work by the previous owner - new CDI carb clean and rejet to 60 pilot...
  17. Dominator / FMX
    So the weekend was supposed to be a wife free bike stripping and rough tickover solving couple of days with maybe a cheeky ride out or two. All started well other than an exhaust valve inspection cap trying to break while being removed but I managed to remove it with only minor damage. The...
  18. Varadero Technical Specs
    Does anyone know the correct torque settings for the front and rear sprocket nuts?
  19. Wheels, Tyres & Tubes
    Looking for a set of dominator wheels
  20. Dominator / FMX
    Looking for a set of wheels for a dominator RD08 mine have rusted away so looking for a set
1-20 of 500 Results
Top