Search Results for ‘side stand’

Hi All, Although I've been a member for years I've never posted before as usually, thanks to the folks that do I usually find what I need...But! I'm rebuilding my 94 A/T and despite taking pictures before disassembly I'm at a total loss as to where the smaller of the 2 side stand springs...

Hi Everyone, I finally got my first XR400 last week and have clocked up a few miles on and off road already. Loving the bike and have already carried out a number of modifications but I'm struggling to find something. The bike came with a K&N air filter on it, I bought a replacement foam filter...

hi, i managed to leave my side stand spring in a forest in devon :/ a genuine honda spring i found for 4euros but with 18euro postage !! so im opting for a universal spring, the only thing is i dont know what length to go for. between the pin on the stand and pin on frame is about 170mm but...

I have a spare red LED indicator on my motogadget, and was thinking of just using it as a side stand indicator. I don’t want it to effect engine, only light up as an indicator to let me know stand is still down. What are people thoughts on this?? Good idea? Or a bit pointless and get rid of...

I’m looking at reducing wiring on my Dommie project, does the carb heater need to be connected? Also if I’m getting rid of side stand switch and clutch switch, and only using neutral switch for the led on dash, can I get rid of the diodes?

From here (2004 - he's in Australia, I think) https://advrider.com/f/threads/living-with-the-honda-transalp-650-now-3-000ks.56814/ ------------------------------ Now that the dust has settled on the new 650 Tranny, these are my observations and experiences thus far. The engine is feeling...

I feel that yesterday's Vtr shock fitment was the final chapter to project "Varastorm". Here's a list of modifications that I've done to my trackday Varadero :) I'm a bit shocked with the amount of things that I've done to it over the years, but here they all are in one thread, Engine...

Hello all Proud owner of a RD7A I'm suffering for an excessive oil lose, I fill the reservoir up to the max mark on the dipstick and 200 miles later the oil is half gone The oil appears to be leaking from one of the overflow tubes whilst parked on the side stand (although this anecdotal...

Mint condition with only 21 K. 8 months MOT. Centre stand, side stand. New front calipers with pads, new back pads, fully serviced with Fuchs oil, 2 keys. only 2 owners from new including me. New battery. New tyres that have done only 300 miles. Many items have been shot blasted, zinced and...

I have a few left of the spreader feet. Made in stainless steel with stainless fasteners. Fit XRV750, Transalp, XL600 & any Honda with the offset plate on the original stand. £12.50 posted UK or £17.50 Worldwide.

https://cdi-shop.de/en/shop/honda-transalp-xl600v-pd06/cdi100-d Digital CDI for Honda Transalp XL600V (PD06) and XRV650 Africa Twin (RD03) From €134.90 * * All prices incl. value added tax, excl. shipping costs Type: Information regarding the available types see below...

LAST FEW REMAINING IF YOU WOULD LIKE ONE - I have acquired a few of these stainless steel side stand extension plates. They fit XRV750 Africa Twin, Transalp, XL600 & 650, and any model with a stand the same as the photo. They are £12.50 posted within the UK and £17.50 anywhere else. PM me if you...

After taking a closer look at my side stand it was quite well worn firsly the paint was looking tired and worn out from the boots when using the stand .Secondly the foot which is in contact with the ground was showing some wear and tear from what i think is when the bike settles on its final...

This is a strange one... When I start the bike on the side stand and use choke the bike idols around 1200rpm, BUT if i lean the Bike over untill it’s level then the revs climb to 2500-3000rpm. This only happens with the choke on. when I’m moving the bike on or off the side stand the handle...

Hi all, I've got a strange issue with my '94 Transalp, let me explain and see if one of you can point me where to look. Current state: Connect both wires to clutch switch - Neutral stay on in all gears. remove one cable bike works as normal, the light goes out when shifting to first and...

Thought I'd post this up, to see if anyone has had a similar issue. A few weeks ago, my 1994 TA suddenly stopped firing on one cylinder. It had been running spot on when I put it away in the garage. Came to start it and it would only run on the front cylinder. I checked the CDi, and sure enough...

As title says, I'm wondering what the wire that comes out by front sprocket is?? I just noticed that my one as been damaged, and havnt had time to look any further, but it's bugging now on what it's for??

My 2001 Dommie is really hard to start and dies really easy when idling. Almost like it misfires every 10th time or something like that. Oil-level is good, spark plug changed last year to an Iridium spark plug from NGK and the batteri is fully charged. I can't really figure out what could cause...

Hi all On a road trip in Europe at the moment and need some advice. I had the engine oil changed and full service about 2000 miles ago at my local Honda main dealer in the uk. I'm not sure what oil was used but assume it was the recommended type. I'm not sure if that would be semi or fully...

Just a quick introduction to say high. I've had my 2000 reg xl1000 Varadero for a couple of months now and love her. She just about got all on her I want except heated grips which I'm fitting tomorrow. Couple quick questions though. I'm pretty sure she has been lowered as I am vertically...