During our move a box has been misplaced :(
Now I have time, space and money to start this rebuild.
A lot of xrv rd04 have been broken for parts but no one seams to keep the little things !
Pricing these small items new, very expensive.
Pair of Givi Pannier Racks for Monokey Cases. Suits XRV750. Givi Part Number PL148. In very good, almost new condition in black. Comes with, as supplied fixing, fasteners & spacers. Please note, one of the rubber stand offs is missing.... in my garage somewhere, but is currently hiding! These...
Have just discovered that the spacers within the rear linkage are no longer available. Two of mine were completely seized, the smaller one where the shock attaches is available from Honda but neither of the longer ones are. Has anyone found a similar part that will fit or could be modified...
The whole bike is now fully restored. Now that I am trying to fit the rear wheel, it looks like the combination of wheel and spacers (one on each side) is 4mm too wide. I really don't know what to think even though I have attempted a dozen times to refit the wheel. Can the trailing have...
Hello, I'm fitting Wirth progressive fork springs to a 2006 Transalp and wanted to know if I should discard the washers which are acting as spacers when I fit the new springs. I believe the Transalp didn't have spacers installed from stock? The bike is second hand and this is the first time I've...
I am sure this has been asked before but I am quite a new varadero rider, I am only 5'10'' tall but the stock screen still doesn't seem to protect me that match. I have tried to put some rubber spacers in to provide a gap but this has not helped much and it is as high as it can go.
I am currently searching for new bushings and spacers (and bolts and seals) for the Pro Link rear suspension linkage, anyone know if someone are selling these parts?
Mine are very rusty and I am rebuilding the whole bike so I would like to get new parts to avoid future problems.
The Honda ones are made of butter, and are severely mangled. I don't want to replace them with the same, as they will go the same way.
Getting these undone are the most stressful part of tank removal (close second to the pathetically located petrol tap).
Wondered if anyone had found...
Well I decided to take the plunge and get a new shock for my 92 dommie well I eventually managed to get the old shock off with only slightly moving the air box (if anyone got a script for removing the air box please let me know) the new shock on but the bike is sitting almost on the floor and...
As the title says my newly acquired Dominator has very loose levers as in vertical movement as if there are washers missing to tighten them up!
Has anyone experienced this? If so what is the fix new levers/spacers to stop them being loose?
Just fitted new tyres to my 89 Dommie. After I had refitted the front wheel I noticed a really small gap between the speedo drive and the hub. It is around 2mm and looks as though it should have a spacer in there. I am certaian the spacer didnt fall out when I removed the wheel although the...
So I'm adding to my to-do list - hence the recent spate of postings )
Task number, well, I've kinda lost count..is fairing repair.
The right side (see pic) front attachment point (where it bolts into the frame) has broken off. The previous owner, I think, kept on adding larger and larger...
I've read a lot about firming up the transalp front end with spacers and heavier fork oil etc. but this doesn't allow much adjustability. I saw these on Ebay 2000 HONDA TRANSALP XL650V BILLET PRELOAD FORK CAP ADJUSTERS | eBay
Has anyone tried these or know much about them?
Been having a chat with Cabbage and don't really want to go spending 120 bucks on progressive springs so wondering whether its worth firming the front suspension up a bit with an oil change in the forks with a heavier weight oil and putting in some preload spacers. Cabbage suggested 10/15mm of...
Has anyone put a set of Talon wheels off another bike onto a Honda XR, if so which ones did you use, talking to Talon they say that their wheels are made for a specific bike and can't be swapped, but I have read about people doing it, not a problem making my own spacers etc, just...
wifes's 52 plate sv650s
6 months tax
12 months mot
new tyre's fitted last week
brake seals all replaced
33bhp restricor kit fitted with certificate from previous owner
hardly used since she bought it
also for sale is a top yoke conversion kit which...
Ok looking at a ktm 990 adventure rear shoch, he is checking lenght for me as he is not sure if from tock adv or the enduro height model
What i want know is how do i find the shock travel on a ktm shock.
also is there any way fitting a ktm adv shock and if possible how do i shorten forks make...
Got brembo 4 pot caliper mounted today and all seems be lining up nicely and brakes feel very nice
spaced disc out with 3mm spacers and caliper and hangar just sloted in nicely
Had grind 2mm off rear of caliper (hated doing it) but have about 0.5 - 1mm air gap between spokes and caliper