Honda XRV Forum banner

spare

  1. Kat EFI

    Suzuki
    Hey guys, I am from Sydney Australia, And own a 1982 Suzuki Katana 7/11. Noticed you have fork extensions. Am trying to fit 07 Bandit 1250 forks to my spare Kat and maybe those fork extensions might be a fit. Can you tell me what size they are and the thread pitch as well. My forks are 43mm...
  2. Blown bulb

    Dominator / FMX
    My dommie’s tail light failed on the way home last night. The first clue was when a trucker flashed his lights at me after I passed him on the M25. A couple of others flashed but it’s remarkable how many of my fellow motorists didn’t! Also remarkable what a faff it is to get to the bulb. Both...
  3. Wanted: Wanted: Gearshift drum,PN: 24300MV1010 RD07A

    XRV Swap Shop
    Hi All, If anyone has a spare/used good condition gearshifter drum for an RD07A, please drop me a line. Cheers Steve
  4. For Sale: 2 x Africa Twin XRV & Transalp Haynes Manuals

    For Sale / Wanted
    1 x Africa Twin XRV & Transalp Haynes Manuals *****BOTH SOLD***** Hi guys & gals, As I have now sold my last XRV I have two spare Haynes manuals, 1 is almost as new and the other has been used but no damage. £15 each including postage to the UK (cheaper than any on ebay etc)
  5. SLR, FX, FMX Swing-Arm

    Dominator / FMX
    I’m pretty sure all the above use the same basic frame, so the dimensions i’m after should be the same. Could someone with a Swing-Arm from one of these measure the front pivot width. That would be the outer width, i.e. the width required in the frame and also the inside width, i.e. the width...
  6. Rear Caliper Sleeve

    Dominator / FMX
    I just made myself one of these sleeves out of stainless steel for the rear caliper on a 96 RD08 (part No14 in the link below) hoping i'll never have to replace it again. Its a cheep enough part but i wanted an excuse to use the grooving tool i bought :D I made two so have one spare if anyone is...
  7. Barney bodget pannier brackets part deux

    Transalp
    This might not interest anyone, except those with some spare Nonfango panniers. It might not interest them either, but hey! :D Just received my newly ordered Givi pannier brackets for my new to me 700. as I had the nonfango panniers, the made up brackets as well and these were last fitted to my...
  8. fuel pump connector source?

    Africa Twin
    Anyone know where or if I can pick up a fuel pump connector plug? I would like to have the facet pump I bought to have as a spare on my next road trip and just put a stock plug on it to have ready. I have a set of new points to put in old pump and would like to keep it in place for now. I really...
  9. Fuel pumps - will an RD04 fit an RD03?

    Africa Twin
    Fuel pump playing up again, going to swap the points but would like to pick up a spare. RD03 pumps don't seem to be available but pumps for later models are. There looks to be quite a difference in list price which makes me wonder if they are very different, any one tried fitting a later OE...
  10. Rear brake lever spline compatible / interchangeable .... ?

    Transalp
    I'd like to experiment with a modification to the rear brake lever of my XL700 Transalp but want to keep my original lever in case it goes horribly wrong! Are the splines the same across the different Transalp models (or any other Hondas)? This would open up the choice of spare parts/price...
  11. Long time no speak! Finding some AT film locations...

    Africa Twin
    Hi all, it's been a while, hope you are all well and loving your new / old ATs :D Sold mine, didn't want to but ironically the difference from an older GS funded our ADV to Spain to hunt down some of those Africa Twin film locations from the original marketing videos. Can't make this up if you...
  12. XL 600 LMF 1985 Twin Headlight Needed

    XL
    Hello, Does anyone have a spare Twin Headlight for the LMF they would be willing to sell? Thank you Luke
  13. Wanted: RD08 Dommie Rear Rim

    For Sale / Wanted
    Does anyone have a spare rear rim (17x2.50) that they are selling? I have stripped my wheels down ready for powder coat and found that there is an area around the tyre valve, where the outer surface is starting to de-laminate. Colour is not an issue as i'm having the Hubs and Rims powder coated
  14. RD08 Dommie Rear Rim

    Dominator / FMX
    Does anyone have a spare rear rim (17x2.50) that they are selling? I have stripped my wheels down ready for powder coat and found that there is an area around the tyre valve, where the outer surface is starting to de-laminate. Colour is not an issue as i'm having the Hubs and Rims powder coated
  15. Another one saved.

    Transalp
    I had a rare spare few minutes this week so carried out a few checks and maintenance on the bikes. Now, the new to me (well 11 months) Transalp is a 2001 on 52 reg and only just turned 14k all seems in good order with no horrors lurking. I popped the sprocket cover off for a look-see, well...
  16. bash plate mounts

    Africa Twin
    Hi all ,does anyone have for sale or know where i can get the rubber grommets which mount the bash plate to the frame mine have perished and i dont seem to be able to locate the grommets locally .. Will i have to go to a Honda dealer ? Any one with an alternative or like i said, some spare for...
  17. Front Wheel Spindle/Axle - Help

    Dominator / FMX
    Hi Folks, Would anyone happen to have a spare front wheel spindle they would like to off load? My Dommi one has a slight bend to it. I believe the FX and SLR (and some other honda models) has the same spindle. Thanks Jim
  18. RD03 - Front MS sight glass replacement.

    Africa Twin
    I want to replace the sight glass/inspection lens on the front master cylinder of my 1988 XRV 60, but I can not seem to find a spare or any information about the size of the lens. Does anyone have any good information about this? :happy8: I am pretty sure the XL600V shares the same master...
  19. front brake caliper

    Dominator / FMX
    Hi, folks, this is a two-parter part 1 i am in need of a front calliper for my new dommie project has anyone got one for sale or trade? part 2 is there a choice of calipers i can work with? i had a slr front caliper on one of my dommies , is there a further choice that you know of? i seem to...
  20. Tools needed to stirp TA

    Transalp
    Hi All, I'm doing a quick trip to Brisbane to pick up a doner Trans Alp and need to pull front end and swing arm / rear wheel off to fit on a pallet for shipping to Darwin. I will be cutting the frame to fit it on as the frame is bent and i have a spare. Just after some info on what tools i may...
Top